Overview

After updated to Tahoe 26.2 and Xcode 26.2 it seems to have forgotten the Model Provider I had configured. I create a new Model Provider and it works fine, until I exit Xcode. When I open Xcode again my Model Provider is gone. It all worked fine before I did the updates of MacOS and Xcode.

Здравствуйте. Подскажите пожалуйста, кто решил данную проблему? Спасибо.

My team has developed an app with a Matter commissioner feature (for own ecosystem) using the Matter framework on the MatterSupport extension. Recently, we've noticed that commissioning Matter devices with the MatterSupport extension has become very unstable. Occasionally, the HomeUIService stops the flow after commissioning to the first fabric successfully, displaying the error: "Failed to perform Matter device setup: Error Domain=HMErrorDomain Code=2." (normally, it should send open commissioning window to the device and then add the device to the 2nd fabric). The issue is never seen before until recently few weeks and there is no code changes in the app. We are suspected that there is some data that fail to download from the icloud or apple account that cause this problem. For evaluation, we tried removing the HomeSupport extension and run the Matter framework directly in developer mode, this issue disappears, and commissioning works without any problems.

When adding new TestFlight users, they are not receiving the email invite. I have had them check junk mail and/or other filtering software. Is anyone experiencing the same thing?

I'm trying to run my app on my iPhone and XCode is unable to detect it. Versions (as of time of writing, these are all the latest versions) XCode: 15.0.1 iOS: 17.1.2 macOS: Sonoma 14.1.2 What I've tried Updating all hardware to the latest versions. Restarting all hardware. Clearing cache/derived data. Using different USBC ports/cables. Using the XCode 15.1-Beta 3 (the latest beta) Clearing trusted computers and re-trusting Disabling Multipath Networking (solution for someone else on the dev forums) Creating a brand new xcode project. Disabling all wifi/bluetooth and reconnecting Using different wifi networks Calling mac support (they directed me back here) Scouring forums What happens I start by disconnecting my phone from my computer, clear trusted computers, restart xcode, and start (basically) from a completely blank slate. First I open XCode to my project. Then I connect my iPhone via USBC. I see that XCode says "iPhone not eligible while pairing in progress" (or something like that). I see on my phone that I must trust this computer, I hit trust, I enter my phone's passcode, then that disappears on my phone, and in XCode the message about eligibility disappears. I then click on the device selector to choose between either a simulator or a hardware device and under hardware I only see a message that says "No eligible devices connected to my mac". If I open the "Manage Run Destinations" organizer I see all the simulators there in the simulators tab, but when I go to the Devices tab, I see nothing. Sometimes when I go through this process, I can get a banner to appear up top, but still no device shows up on the left. The banner will show me that it is indeed my iPhone, but it will be missing information like "Serial Number" or "Capacity". Here's a screenshot of what I see. Keep in mind, this banner up top does not always show up when I go through this process. iPhone CAN be detected on my other laptop When I do this exact same thing on my other laptop, everything works just fine. Here are the specs I'm running on that laptop. (using the same cable/wifi network/etc) XCode 15.0.1 macOS: Ventura 13.6.1 iPhone 17.1.2 (I'm using the same iPhone) The only difference here being the macOS version. However, the problem started on my "broken" computer while I was running a previous major macOS version. This problem is actually what prompted my to do a system update to Sonoma. Please for the love of god, halp!!!

Out of nowhere I got some red banner on top of my iPhone 13 mini / iOS 17.5. I cannot pin point the root cause of this. What I can say is that it only happens to Simulators of a certain type, e.g. iPhone 12 and 13 mini, but not iPhone 14 for example. I have installed Xcode 26.1.0 and 26.1.1, out of which 26.1.0 is selected: $ xcode-select -p /Applications/Xcode-26.1.0.app/Contents/Developer And following runtimes: $ xcrun simctl runtime list == Disk Images == -- iOS -- iOS 17.5 (21F79) - CF933623-A258-44F8-B248-C0F25C0C343B (Ready) iOS 26.1 (23B80) - D11C3CDC-EE3D-44CC-8B92-9B7D00B54B0B (Ready) Total Disk Images: 2 (14.6G) Installing the newer 26.1 23B86 runtime doesn't help either.

Hello, I am trying out Xcode Cloud for the first time. I could connect to Github in the initial setup and had a few failed builds (package resolution error), which I resolved fairly quickly. Now whenever I am trying to build, I get the following error: Xcode Cloud is unable to connect to the repository “<respository-name>”. Reconnect the repository to resume builds. I am unable to remove the connection from settings as well because it's stuck in a loading state. Is there a way to fix this?

Unexpected behavior encountered when scanning NFC tags. Imagine a link shortener web service where users can create lots of different URLs that are hosted on the same domain eg, https://short.com/unique-path The service has optional App Clip capability -- users can select any of their links and have the service create an App Clip for the selected link(s). Users can encode their URLs into NFC tags and have their customers scan NFC tags. Let's take just two URLs for example: https://short.com/foo https://short.com/bar The /foo link does have an App Clip associated with it while /bar does not have it. Each link has been encoded into appropriate NFC tag. Expected behavior when scanning from an iPhone: /foo -- shows an App Clip popup. /bar -- shows a "Open in Safari" default notification. What's actually happening /foo -- opens App Clip poput with correct metadata (title, subtitle, image) which is totally expected behavior. /bar (the one that doesn't have app clip associated with it) -- opens an App-Clip-like popup with the following error: CPSErrorDomainError 2 (see attachment below) So for some reason when someone scans an NFC tag with a URL that is not an App Clip and never has been -- it always shows that error regardless whether the URL exists or does not exist. I've tried few different/random URLs (which don't have an App Clip associated with it) and all of them show the same error. Additional details: All links use the same domain and URL format: domain.com/path where path is a short string of random a-Z characters. All App Clips are created at the same iOS app. AASA is good: Cache and Debug -- both green. This issue has happened to lots of users on lots of different iPhones and iOS'. Since the issue's been happening to lots of different users on different iPhone(s)/iOS' no sysdiagnose is attached. Actually it works the same on every device/iOS we've tried. Before submitting the issue, I've found few other developers reporting the same issue. What's interesting though is none of the links I've went through comes with a definite answer and it seems like this issue just randomly comes and goes without any specific changes on the server and/or iOS app. Dropping the links of similar issues below. https://developer.apple.com/forums/thread/671433 https://developer.apple.com/forums/thread/665969 https://developer.apple.com/forums/thread/775316 https://developer.apple.com/forums/thread/764545

When I use the .zoom transition in a navigation stack, I get a glitch when interrupting the animation by swiping back before it completes. When doing this, the source view disappears. I can still tap it to trigger the navigation again, but its not visible on screen. This seems to be a regression in iOS 26, as it works as expected when testing on iOS 18. Has someone else seen this issue and found a workaround? Is it possible to disable interrupting the transition? Filed a feedback on the issue FB19601591 Screen recording: https://share.icloud.com/photos/04cio3fEcbR6u64PAgxuS2CLQ Example code @State var showDetail = false @Namespace var namespace var body: some View { NavigationStack { ScrollView { showDetailButton } .navigationTitle("Title") .navigationBarTitleDisplayMode(.inline) .navigationDestination(isPresented: $showDetail) { Text("Detail") .navigationTransition(.zoom(sourceID: "zoom", in: namespace)) } } } var showDetailButton: some View { Button { showDetail = true } label: { Text("Show detail") .padding() .background(.green) .matchedTransitionSource(id: "zoom", in: namespace) } } }

Hello. I have an 12 year old app that still has some objective-c code in it. I have a place where i have a flip animation between 2 view controllers that looks like this: [UIView transitionFromView:origView toView:newViewController.view duration:0.5 options:UIViewAnimationOptionTransitionFlipFromRight completion:nil]; It has looked like this since 2012 at least. In our production release, it works prior to 26.1, but in 26.1 and 26.2, the flip is off-center and looks weird. it's like both edges flip the same way. It's a little bit hard to explain. If seen at least 2 other app store apps that i have installed behave this way too, from 26.1 and onwards. Anyone else seen this? Is there anything that can be done about it? Thankful for thoughts.

My MacBook Pro M5 running MacOS Tahoe 26.3 beta fails to detect two identical ASUS ROG Swift OLED PG32UCDM monitors simultaneously. Only one display is recognized at a time. One potential root cause might be that both monitors report identical binary EDID serial numbers (0x01010101), and the MacBook Pro M5 appears to use this value exclusively for display identity rather than combining it with other more detailed information (e.g., port, or alphanumeric serial number). I've verified that the monitor EDID binary serial numbers are in fact identical -- however the alphanumerical serial numbers are not identical. NOTE: This behavior is specific to the MacBook Pro M5 — when connecting both monitors via usb-c to a Mac Mini M4 Pro running the same MacOS Tahoe 26.3 beta, the monitors work fine. The OS detects both and assigns different names to them (PG32UCDM (1) and PG32UCDM (2)). NOTE: I could be wrong about this root cause, I don't have a way to disprove it, though the fact the monitors work fine on a Mac Mini is suspicious. What I have tried: Connecting the two monitors using different monitor ports (one on DisplayPort, another on HDMI, etc.), and different MacBook ports (one on HDMI, another on USB-C, etc.) Bumping down the resolution on the monitors to "1920x1080 (low resolution)" and 30Hz to rule out bandwidth issues. Connecting one, or both, monitors to CalDigit TS5 Plus dock. Neither alternate configuration yields the device recognizing both screens. Using BetterDisplay to import a manually-edited EDID for the screen, with a different binary EDID value, manufacturer name, etc. I've also verified that if I plug in my Apple Studio Display as one of the monitors, then the MacBook recognizes both one of the PG32UCDM monitors and the Studio Display at the same time. The issue seems to occur only when both monitors plugged into it are the same PG32UCDM model. When I have both monitors plugged into my MacBook, each time I disconnect the cable to whichever monitor is currently recognized, it immediately recognizes the other monitor. Plugging the cable for the disconnected monitor back in has no effect. I'm at a loss. Has anyone run into this issue and found a successful workaround that is not one of the approaches I've described above?

My iOS app uses CloudKit key-value storage. I have not updated the app in a few years but it works fine. Since it was last updated, I transferred the app from an old organization to my personal developer account. Now that I'm working on the app again I get an error: Provisioning profile "iOS Team Provisioning Profile: com.company.app" doesn't match the entitlements file's value for the com.apple.developer.ubiquity-kvstore-identifier entitlement. In the entitlement file, it has $(TeamIdentifierPrefix)$(CFBundleIdentifier) as the value for iCloud Key-Value Store. I've verified the variables resolve as expected. When I parse the provisioning profile there is no entitlement value for key-value storage. What am I getting wrong?

I'm using one UITabBarController which leads to 6 NavigationController. Therefore the user will get 4 icons displayed and one icon with three points to see the rest of the Navigation Controller. If the user now tries to edit the list and moves one item from the hidden area towards the TabBar at the bottom, the App crashes with the error: Exception NSException * "Can't add self as subview" 0x0000600000d16040 I can see this effect at least on both my apps. If the same compilation is run on a older iOS version, there is no crash. Is there anything I have to take care of the configuration of the TabBar, when it comes to iOS26?

We have developed a Parental/Self control app using Screen time API. We have used individual authentication to authorize the app, using the instructions here: https://developer.apple.com/documentation/familycontrols/authorizationcenter The problem is , that individual auth can be disabled easily , by the following steps: enter Settings app. in Settings app, click on the Parental/Self control app. click to disable screen time restriction. show the device owner's face/fingerprint. (or pin code) Why is that a problem: Parental control apps, or self-control apps, are about giving control to the software, To make it hard for the user to disable the restrictions. So using the flow I have introduced above, it's super-easy for a user to disable his Parental control restrictions, which misses the entire point of Parental/Self control idea. Furthermore, not only the user have the means to unlock his screen time restrictions, he also MUST have the means to unlock it. This makes Screen time (with individual auth) useless: I have a code ready to make a great parental control app for my clients, with amazing ideas, but I can't use the Screen time API unless this problem is fixed. Why child-parent auth is not enough: My clients are grownups people between ages of 15-40, that are interested in self-control, so they don't have iCloud child accounts. also, the child-parent auth solution forces my clients to give some control to other person, and my clients prefer their privacy. Some of them prefer self-control and not parental-control. What I suggest as a solution: 1: Give more options to users how to disable the Screen time restrictions. including: a second faceID / FingerPrint (that isn't the same as the one used to unlock the device) a second pin password. a string password 2: Give the users the option to choose to not have the device's owner Face/Finger/Pincode ID , as a method to disable the Screen time restrictions.

Hi, As a company, we have several apps in the AppStore that contain AppClips. With the latest iOS18 it works without any problems. With all iOS26 betas so far, however, there is always the problem “ASDErrorDomain- Error 507” and the AppClip cannot be opened. You can easily test this by scanning the following QR code with the system camera: You only ever get this error instead of the option to open the AppClip. As the iOS26 beta phase is already at an advanced stage, we are naturally concerned as to whether the problem will be solved.

Hello! I've been trying to automate tests using Appium/XCUITests in a React Native APP, but I'm finding many blockers. They are related to the amount of nested elements in the "DOM" in which the XCUItest can not go deeper to get all the elements we need. snapshotMaxDepth -> The XCUITest does not support more than 60 value, otherwise it returns the following error: Got response with status 404: {"value":{"error":"stale element reference","message":"The previously found element "Application 'xyz.xxx.xxx'" is not present in the current view anymore. Make sure the application UI has the expected state. Original error: Error kAXErrorIllegalArgument getting snapshot for element <AXUIElementRef 0x600003aaf750> {pid=95967} {uid=[ID:1 hash:0x0]}","traceback":"(\n\t0 CoreFoundation 0x00007fff20405604 __exceptionPreprocess + 242\n\t1 libobjc.A.dylib 0x00007fff201a4a45 objc_exception_throw + 48\n\t2 WebDriverAgentLib 0x000000010a3caa53 -[XCUIElement(FBUtilities) fb_takeSnapshot] + 723\n\t3 WebDriverAgentLib 0x000000010a3cad07 -[XCUIElement(FBUtilities) fb_snapshotWithAttributes:maxDepth:] + 183\n\t4 WebDriverAgentLib 0x000000010a37baea +[FBXPath writeXmlWithRootElement:indexPath:elementStore:includedAttributes:writer:] + 778\n\t5 WebDriverAgentLib 0x000000010a37b12c +[FBXPath xmlRep... But if I inform less than 60, the XCUITest is not able to get all the elements we need to automate: There are many threads about this, all of them the issue is in the XCUITest: https://github.com/appium/appium/issues/14825 https://discuss.appium.io/t/handling-staleelementreferenceexception/35095/11 https://github.com/appium/appium/issues/18085 https://discuss.appium.io/t/error-in-appium-desktop-refreshing-source-after-adding-snapshotmaxdepth-greater-than-62/34058 https://stackoverflow.com/questions/74235441/appium-cant-reach-elements-in-ios-source-tree-they-are-too-deep-works-fine-in Tested all possible solutions suggested in the threads, but I will have the issue.

Since upgrading to Xcode 26 beta 4 and using the iOS 26 simulator for testing our app, we've stopped being able to receive device tokens for the simulator from the development APNS environment. The APNS environment is able to return meta device information (e.g. model, type, manufacturer) but there are no device tokens present. When running the same app using the iOS 18.5 simulator, we are able to register the device with the same APNS environment and receive a valid device token.

Hello everyone, I’m looking for some guidance to see if anyone has experienced a similar issue with the Apple Developer Program membership. About one week ago, I completed the payment for the membership. I received an email with the subject: We’re processing your order Wxxxxxxxxxx That email included the order details and cost, and shortly after that, I also received the CFDI invoice for the payment, so the charge appears to have been completed successfully. However, up to now: I have not received any membership confirmation email The membership does not appear under Subscriptions in my Apple ID It is not active in the Apple Developer app On the Apple Developer website, I still see the usual message as if the membership was not purchased: “Purchase your membership to continue your enrollment. Buy today” I understand Apple mentions that the purchase may take up to 48 hours to process, but it has now been more than a week with no changes. Has anyone else encountered this situation? Is it normal to receive the invoice but not have the membership activated? Would you recommend contacting Apple Developer Support at this point? Thanks in advance for any help or shared experiences.

Description The Shortcut Automation Trigger Transaction frequently times out, ultimately causing the shortcut automation to fail. Please see the attached trace for details. Additionally, the Trigger is activated even when the Transaction is declined. Details In the trace I see the error: [WFWalletTransactionProvider observeForUpdatesWithInitialTransactionIfNeeded:transactionIdentifier:completion:]_block_invoke Hit timeout waiting for transaction with identifier: <private>, finishing. Open bug report: FB14035016

Announcing the Swift Student Challenge 2026 Every year, Apple’s Swift Student Challenge celebrates the creativity and ingenuity of student developers from around the world, inviting them to use Swift and Xcode to solve real-world problems in their own communities and beyond. Learn more → https://developer.apple.com/swift-student-challenge/ Submissions for the 2026 challenge will open February 6 for three weeks, and students can prepare with new Develop in Swift tutorials and Meet with Apple code-along sessions. The Apple Developer team is here is to help you along the way - from idea to app, post your questions at any stage of your development here in this forum board or be sure to add the Swift Student Challenge tag to your technology-specific forum question. Your designs. Your apps. Your moment.