After upgrading to Xcode 15.2 or above(Till Xcode 16.2), users are unable to open Site B (HTTP URL) from Site A (HTTP URL) within our Browser app when loaded in WKWebView. Clicking the link to Site B results in a spinning wheel, but the site does not load. This issue is not present when the app is built with Xcode 15.0.1. Additionally: Users are connected to a VPN, which is required to access the sites. Site A and Site B are on different domains (cross-domain request). Expected Behavior: Clicking the link to Site B should successfully load the site with user information passed from Site A. Current Behavior: Clicking the link results in a spinning wheel, but Site B does not load inside WKWebView. Technical Details: Both Site A and Site B use HTTP (not HTTPS). Site A and Site B have different domains (cross-domain request). Do not use location.href for transitions. Instead, we temporarily set about:blank in an iframe and then submit data via a form to the target system’s URL within the iframe. This approach worked in Xcode 15.0.1 but fails in Xcode 15.2 or above. Users are connected to a VPN, which is required to access the sites. WKWebview is not receiving navigation delegate callback for Site B Steps to Reproduce: Ensure the device is connected to a VPN. Open the app (using WKWebView) built with Xcode 15.2 or above. Load Site A (HTTP) within the app in WKWebView. Click the link to Site B (HTTP), which should open in an iframe. Observe that a spinning wheel appears, but Site B does not load. Environment: Xcode Versions Affected: 15.2 or above (issue present), 15.0.1 (no issue) iOS Version: All iOS versions Devices: iPad Questions: Has there been any change in WKWebView’s handling of HTTP URLs or VPN-related network traffic in Xcode 15.2? Are there any new security policies, iframe restrictions, or VPN-related changes in this version that might be affecting this behavior? Request for Assistance: Can you confirm if this is a known issue or an intended change? Are there any workarounds available?

Hi Team, Our team member trying to enroll through the invite in Apple Developer portal Note: Phone number is valid but still we are getting this error. It happens in all the browser

Hi everyone, I’m working on a web project developed on Adobe Experience Manager (AEM), where we’ve built a custom component that embeds Apple Podcasts episodes using the official iframe provided via https://embed.podcasts.apple.com. Everything works correctly from a rendering point of view, but we are now exploring ways to track user interactions with the embedded player, specifically events such as: start, play, pause, progress milestones (e.g. 25%, 50%, etc.). This data would be used to send analytics events to Adobe Analytics. So far, we haven’t found any documentation or JavaScript API that would allow us to listen to these events. We'd like to ask: Is there any official way to track playback events from an Apple Podcasts iframe? Any information, clarification, or direction would be really appreciated. Thanks in advance! Thanks, Adriana

Hi, when I display an HTML page with a on Safari iOS, I get a nice UI. Great! At the first look I see a video frame with an arrow-in-a-circle button in the middle. Very nice. I click on the arrow and I get a fullscreen view while the video begins to play. I watch the video then I pause it then I click on the top-left x button. So I go back to my html page and the video is perfectly there as it was before. But, there is an annoying new detail. The video frame is really dark, it still presents all the controls and a "different" arrow button to play it again. In other words that nice video-frame, that nice picture, is not longer visible on the page. That nice page with nice pictures has now an almost-black rectangle. Too bad. Sure I can click on the video (outside the controls) then the controls and the black overlaying frame disappear. I can see that nice picture again. Finally. Well, but the arrow-in-a-circle button to play the video disappeared. Now the user cannot longer understand that's a video to play. It looks just like any other pictures to admire statically. Is any way to get the previous first look of the video? The one clear, with the current frame and the arrow-in-a-circle look?

When trying to create an anchor with the download attribute it does not work for PDF files, it displays the files inline. Also when the download attribute is set the target attribute is ignored too. The tag: ... The behavior: It displaies the file in line. The correct behavior: The file should be downloaded and not displayed or at least displayed but with the "_blank" target (new tab). This is an issue when working with WebSockets which is closed when the file is opened inline.

Doc URL: https://developer.apple.com/documentation/applepayontheweb/requesting-an-apple-pay-payment-session How can I send a POST request using PHP, and what certificates are required? Currently, I have downloaded the following files on the backend: merchant_id.cer, apple_pay.cer, and a local cert.p12 file This my code: But,run error:cURL Error: unable to set private key file: '***/private.pem' type PEM%

I'm experiencing issues with audio playback in my React video player component specifically on iOS mobile devices (iPhone/iPad). Even after implementing several recommended solutions, including Apple's own guidelines, the audio still isn't working properly on iOS Safari. It works completely fine on Android. On iOS, I ensured the video doesn't autoplay (it requires user interaction). Here are all the details: Environment iOS Safari (latest version) React 18 TypeScript Video files: MP4 with AAC audio codec Current Implementation const VideoPlayer: React.FC<VideoPlayerProps> = ({ src, autoplay = true, }) => { const videoRef = useRef<HTMLVideoElement>(null); const isIOSDevice = isIOS(); // Custom iOS detection const [touchStartY, setTouchStartY] = useState<number | null>(null); const [touchStartTime, setTouchStartTime] = useState<number | null>(null); // Handle touch start event for gesture detection const handleTouchStart = (e: React.TouchEvent) => { setTouchStartY(e.touches[0].clientY); setTouchStartTime(Date.now()); }; // Handle touch end event with gesture validation const handleTouchEnd = (e: React.TouchEvent) => { if (touchStartY === null || touchStartTime === null) return; const touchEndY = e.changedTouches[0].clientY; const touchEndTime = Date.now(); // Validate if it's a legitimate tap (not a scroll) const verticalDistance = Math.abs(touchEndY - touchStartY); const touchDuration = touchEndTime - touchStartTime; // Only trigger for quick taps (< 200ms) with minimal vertical movement if (touchDuration < 200 && verticalDistance < 10) { handleVideoInteraction(e); } setTouchStartY(null); setTouchStartTime(null); }; // Simplified video interaction handler following Apple's guidelines const handleVideoInteraction = (e: React.MouseEvent | React.TouchEvent) => { console.log('Video interaction detected:', { type: e.type, timestamp: new Date().toISOString() }); // Ensure keyboard is dismissed (iOS requirement) if (document.activeElement instanceof HTMLElement) { document.activeElement.blur(); } e.stopPropagation(); const video = videoRef.current; if (!video || !video.paused) return; // Attempt playback in response to user gesture video.play().catch(err => console.error('Error playing video:', err)); }; // Effect to handle video source and initial state useEffect(() => { console.log('VideoPlayer props:', { src, loadingState }); setError(null); setLoadingState('initial'); setShowPlayButton(false); // Never show custom play button on iOS if (videoRef.current) { // Set crossOrigin attribute for CORS videoRef.current.crossOrigin = "anonymous"; if (autoplay && !hasPlayed && !isIOSDevice) { // Only autoplay on non-iOS devices dismissKeyboard(); setHasPlayed(true); } } }, [src, autoplay, hasPlayed, isIOSDevice]); return ( <Paper shadow="sm" radius="md" withBorder onClick={handleVideoInteraction} onTouchStart={handleTouchStart} onTouchEnd={handleTouchEnd} > <video ref={videoRef} autoPlay={!isIOSDevice && autoplay} playsInline controls crossOrigin="anonymous" preload="auto" onLoadedData={handleLoadedData} onLoadedMetadata={handleMetadataLoaded} onEnded={handleVideoEnd} onError={handleError} onPlay={dismissKeyboard} onClick={handleVideoInteraction} onTouchStart={handleTouchStart} onTouchEnd={handleTouchEnd} {...(!isFirefoxBrowser && { "x-webkit-airplay": "allow", "x-webkit-playsinline": true, "webkit-playsinline": true })} > <source src={videoSrc} type="video/mp4" /> </video> </Paper> ); }; Apple's Guidelines Implementation Removed custom play controls on iOS Using native video controls for user interaction Ensuring audio playback is triggered by user gesture Following Apple's audio session guidelines Properly handling the canplaythrough event Current Behavior Video plays but without sound on iOS mobile Mute/unmute button in native video controls doesn't work Audio works fine on desktop browsers and Android devices Videos are confirmed to have AAC audio codec No console errors related to audio playback User interaction doesn't trigger audio as expected Questions Are there any additional iOS-specific requirements I'm missing? Could this be related to iOS audio session handling? Are there known issues with React's handling of video elements on iOS? Should I be implementing additional audio context initialization? Any insights or suggestions would be greatly appreciated!

When the “Use Strong Password?” dialog appears and I select “Not Now” to manually enter my own password, the password I type is displayed in plain text instead of being masked. Since the input field is of type="password", the entered characters should be hidden as is standard for password inputs. Is there a way to prevent this behavior and ensure that the password is properly hidden even after dismissing the strong password suggestion dialog?

I'm developing an application that makes use of a WebView. When resuming the app I occasionally run into an issue where the application just shows as a blank page. In the Console.app I see a stack trace, however the details are hidden (see below). The stack trace is thrown from JavaScriptCore. default 13:37:07.029261+0200 outlinerrs_dioxus 1 0x1b80cd678 <private> default 13:37:07.029360+0200 outlinerrs_dioxus 2 0x1b7d50e30 <private> default 13:37:07.029369+0200 outlinerrs_dioxus 3 0x1047ec800 <private> default 13:37:07.029539+0200 outlinerrs_dioxus 4 0x1b7d37924 <private> default 13:37:07.029548+0200 outlinerrs_dioxus 5 0x1b8102a78 <private> default 13:37:07.029789+0200 outlinerrs_dioxus 6 0x1b8100cb8 <private> default 13:37:07.029834+0200 outlinerrs_dioxus 7 0x1b7ba7b0c <private> default 13:37:07.029851+0200 outlinerrs_dioxus 8 0x1b879a520 <private> default 13:37:07.029870+0200 outlinerrs_dioxus 9 0x1b817f204 <private> default 13:37:07.030159+0200 outlinerrs_dioxus 10 0x1b76bfce8 <private> default 13:37:07.030186+0200 outlinerrs_dioxus 11 0x1b76ad838 <private> default 13:37:07.030245+0200 outlinerrs_dioxus 12 0x1b76bd76c <private> default 13:37:07.030324+0200 outlinerrs_dioxus 13 0x1b22c827c <private> default 13:37:07.030424+0200 outlinerrs_dioxus 14 0x1b22c8034 <private> default 13:37:07.030461+0200 outlinerrs_dioxus 15 0x19d6df230 <private> default 13:37:07.030514+0200 outlinerrs_dioxus 16 0x19d6df1a4 <private> default 13:37:07.030584+0200 outlinerrs_dioxus 17 0x19d6bcc6c <private> default 13:37:07.030592+0200 outlinerrs_dioxus 18 0x19d6928b0 <private> default 13:37:07.030601+0200 outlinerrs_dioxus 19 0x19d691c44 <private> default 13:37:07.030607+0200 outlinerrs_dioxus 20 0x23ca6e498 GSEventRunModal default 13:37:07.030675+0200 outlinerrs_dioxus 21 0x1a300cddc <private> default 13:37:07.031049+0200 outlinerrs_dioxus 22 0x1a2fb1b0c UIApplicationMain default 13:37:07.031064+0200 outlinerrs_dioxus 23 0x104a76278 <private> default 13:37:07.031070+0200 outlinerrs_dioxus 24 0x1047a0064 <private> default 13:37:07.031254+0200 outlinerrs_dioxus 25 0x104781efc <private> default 13:37:07.031343+0200 outlinerrs_dioxus 26 0x1047493e0 <private> default 13:37:07.031352+0200 outlinerrs_dioxus 27 0x10477e1c8 <private> default 13:37:07.031358+0200 outlinerrs_dioxus 28 0x1047a0184 <private> default 13:37:07.031373+0200 outlinerrs_dioxus 29 0x1047a033c <private> default 13:37:07.031409+0200 outlinerrs_dioxus 30 0x104733724 <private> default 13:37:07.031451+0200 outlinerrs_dioxus 31 0x104464e98 <private> I tried to create com.apple.WebKit.plist in /Library/Preferences/Logging/Subsystems with the following contents: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>DEFAULT-OPTIONS</key> <dict> <key>Enable-Private-Data</key> <true/> </dict> </dict> </plist> Does anyone know how to reveal the hidden logs?

I have an app which has at least two extensions: A Content Blocker extension with a request handler that returns an appropriate NSExtensionItem as part of beginRequest. A different file URL is returned depending upon if the content blocking is on or off by a user setting A Safari Web Extension that includes a toolbar button and popover that enables users to enable or disable the ad blocking of the content blocker extension All three targets (App, Content Blocker appex and Web Extension appex) use an App Group default to read and set the on or off status of the content blocking. When the user changes the content blocking status, the app group default is updated and SFContentBlockerManager.reloadContentBlocker(...) is called. The Content Blocker extension reads the default and then returns the appropriate file URL. The issue is, I have noticed that whenever SFContentBlockerManager.reloadContentBlocker(...) is called from the app, Safari always applies the correct rules from the returned file URL. However sometimes when SFContentBlockerManager.reloadContentBlocker(...) is called from the Safari Web Extension using native messaging, Safari does NOT apply the correct rules from the returned file URL. Using logging I have confirmed that the Content Blocker extension always returns the appropriate file URL irrespective if called as a result of the app or the web extension. Despite this, Safari does not seem to always apply the returned file URL rules when it is called from the Safari Web Extension appex. In these cases, quitting Safari and relaunching it seems to make it apply the rules correctly (obviously this is applying it due to its launch state, not due to the Web extension appex asking it to do so at that point). All targets have access to the App Group location where the active content blocking file URL belongs and the inactive content blocking file URL is within the Safari content blocker target as a resource. I don't think this is a memory status issue as I cannot see the Content Blocker extension being killed when it returns complex rules --- the fact it always works when called via the app also seems to rule this possibility out. This brings up a number of questions: Is calling SFContentBlockerManager.reloadContentBlocker(...) from a different appex, of the same app target and app group supported? (it seems to work sometimes and did work in previous versions of the app). Is there an issue that the Content Blocker extension sometimes returns a file URL that perhaps the calling Web Extension appex may not have access to (even though Safari should via the Content Blocker extension)? Any other ideas of why this may not be working correctly? Has anyone else experienced this? It seems to happen on both iOS and macOS Safari using the same codebase.

Hi! My SwiftUI app is a rather complex browser app. Starting with iOS 18, the app crashes due to repeted reloads of the WkWebView. I’ve tracked the issue as far as I can, but I still haven’t found the root cause. My app is structured like this: MainView holds a cuple of subviews. It also holds a @StateObject called viewModel that holds a lot of @Published vars. The viewModel is passed as a enivormentObject. Example from ViewModel: @MainActor class ViewModel: NSObject, ObservableObject { @Published public var isLoading: Bool = false @Published public var loadProgress: Double? = 0 public func setIsLoading(_ value: Bool) async { self.isLoading = value } public func setLoadProgress(_ value: Double?) async { self.loadProgress = value } } WebView is a subview of MainView, which holds a navigation bar, and a UIViewRepresentable, which is a WkWebView. The WkWebView pushes some states to the ViewModel as the underlying values of the WkWebView changes, i.e. estimaedProgress, and isLoading. This is done via KVO and works like this: estimatedProgressObservation = self.parent.webView.observe(\.estimatedProgress) { webView, progress in Task { await parent.viewModel.setLoadProgress(webView.estimatedProgress) } } isLoadingObservation = self.parent.webView.observe(\.isLoading) { webView, value in Task { await parent.viewModel.setIsLoading(webView.isLoading) } } By using a timer in WkWebViews Coordinator, i trigger a load after a configurable amount of time :
 func loadUrl(url: URL) { DispatchQueue.main.async { console.info("Load URL: ...", sensitive: "Load URL: \(url.absoluteString)") let policy: NSURLRequest.CachePolicy if self.parent.settings.noCache { policy = .reloadIgnoringLocalAndRemoteCacheData } else { policy = .useProtocolCachePolicy } let request = URLRequest(url: url, cachePolicy: policy) self.parent.webView.load(request) } } Running the app with the automatic reload enabled freezes the app after a couple of hours. It also seems to freeze Safari on the device. The device needs to be rebooted. If I inspect the device's running processes, hundreds of ”com.apple.webkit. web content " processes are running. Removing await parent.viewModel.setLoadProgress(webView.estimatedProgress) and await parent.viewModel.setIsLoading(webView.isLoading) fixes the issue, but it is necessary for other app functions. Therefore, is suspect that the viewModel somehow causes the bug. The issue arises after a couple of loads 5-10. The debugger shows a message when the processes start to pile up. I suspect its related. Failed to terminate process: Error Domain=com.apple.extensionKit.errorDomain Code=18 "(null)" UserInfo={NSUnderlyingError=0x12d0e7f60 {Error Domain=RBSServiceErrorDomain Code=1 "Client not entitled" UserInfo={RBSEntitlement=com.apple.runningboard.terminateprocess, NSLocalizedFailureReason=Client not entitled, RBSPermanent=true}}} How can I find out what causes the suspected memory leak? Instruments gives me nothing of value. The memory leak wasn't present in iOS 17. Is this a bug in iOS 18, or was something intentionally changed?

Hello, I am experiencing an issue when trying to open the browser on my Apple Watch SE 2 running the latest version, watchOS 11.6. When I attempt to visit any website, the browser opens and displays the URL at the top as if it is loading, but the screen remains black and no content is displayed. The internet connection is available, and all other apps on the watch work normally. This issue occurs only with the browser. I would appreciate any guidance or solution to resolve this problem. Thank you for your assistance.

Hello, I'm using Safari 18.2 on Sonoma 14.6.1. I was using the Developer Tools to do a Local Request Override in the Source tab for a CSS file that had a changing query string. I thought I had a good regular expression to catch all variants, but apparently it was too generic and possibly wrong, and made both Source and Network tabs no longer work in my Safari. The regular expression I entered for the Local Request Override was: //build/style.css(?.*)?$ Now my dev tools is broken to the extent that the Source and Network tabs no longer work. The slide-out panel on Source that shows Breakpoints, LocalOverrides, etc no longer shows. The toggle for it does, but does nothing now. UI in general looks a little wack on both tabs. So, since I can't turn off the Local Request Override, I've been trying to locate where Safari may have stored it to manually delete it. Not having a lot of luck on that front. It seems to me that Safari was unable to escape my regular expression correctly and it then causes additional issue. Just a guess though. Any advice or help in getting Safari Source & Network working again / manual removal of the LocalOverride would be greatly appreciated. I'm fluent in OSX and Linux, but grep was not much help surfacing anything that worked. Thanks in Advance, possibly a Safari bug as well.

Hello, I followed the instructions to set up a custom logo for our domain name Allogarage.fr, both for the brand and the domain. Everything appears to be correctly configured in Apple Business backend for several weeks now, but the logo still doesn’t show up in Mail. Is the branded email feature available in France? Are there any additional steps required?

When a DNR rule is set for a specific URL and the request receives a server-side redirect (e.g., 302) to a different URL that does not match the urlFilter, the rule still seems to apply to the redirected request. We are using macOS 15.4 and Safari 18.4. For example, consider two sequential calls: call1 and call2. call1 triggers a 302 redirect to call2. A DNR rule is created to add a "Cookie" header to call1 based on its URL. Unexpectedly, the same cookie is also added to call2, even though call2's URL does not match the rule's urlFilter. This results in the Set-Cookie response from call1 being ignored, and call2 receiving the manually set cookie instead—leading to incorrect behavior. This issue doesn't occur in Chrome or Firefox, where the rule is not applied to the redirected request if the URL no longer matches. We are looking for assistance in fixing these issues and having our Safari Extension function the same as it does in Firefox and Chrome.

Hey everyone, After installing iOS 26 beta, I started noticing unexpected behavior in our input event handlers. Specifically, when users type into an field, event.target.value is always an empty string — but only when the JS file is loaded from a specific domain (e.g., t1.daumcdn.net). The exact same code works perfectly when hosted on other domains like t2.daumcdn.net or search1.daumcdn.net. 👉 I created a demo here: 🔗 CodePen Demo The scripts loaded from each domain are 100% identical (apart from the top-level selector). Before iOS 26 beta, this worked fine. I suspect this is related to ITP or some new cross-origin behavior in Safari, but I’d love to know if anyone else is running into this — or if someone knows a workaround. Thanks!

{ "epochTimestamp": 1755169981033, "expiresAt": 1755173581033, "merchantSessionIdentifier": "SSH4ADF1D97A60B47FC8537037BE9892237_FF777A9CB5E9EDAB38A01E4EDF71CB5572F19153853DAC70ADC5AA3E75877CB4", "nonce": "b6f1e016", "merchantIdentifier": "7C52E6BFA112124092008236BE1EE49791E4E82E9082AD9AC98D55B03A088120", "domainName": "1960-ikffk.checkout.trypeppr.com", "displayName": "peppr", "signature": "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", "operationalAnalyticsIdentifier": "peppr:7C52E6BFA112124092008236BE1EE49791E4E82E9082AD9AC98D55B03A088120", "retries": 0, "pspId": "7C52E6BFA112124092008236BE1EE49791E4E82E9082AD9AC98D55B03A088120" } This is generated in the onvalidatemerchant event handler, and passed into session.completeMerchantValidation. Using a sandbox account with linked cards, the next thing that happens is a "payment not completed" message in the ApplePay popup on the page, and the oncancel event is hit Inspecting the event, I don't see anything that hints at the issue. There is a sessionError object, but its code is "unknown" and the info object is empty.

Hello there, back in the old WebKit API there was the WKDownloadDelegate to handle download actions in WebViews. I was wondering how to handle download actions within the new WebKit in SwiftUI. Is there anything to use already or are there workarounds to handle downloads? Greetings, Thorben

Steps to Reproduce: Open the Bing search page in Safari (example URL: https://www.bing.com/search?q=webkit&form=APIPH1&PC=APPL). Pinch-zoom in or out, then return the page to exactly 100% zoom. Rotate the device from portrait to landscape orientation. Observe that the page is incorrectly scaled to a value other than 100%. Rotate the device back to portrait orientation. The page remains at the incorrect zoom level. Expected Result: After returning the page to 100% zoom, changing orientation should keep the zoom level at exactly 100% in both portrait and landscape modes. Actual Result: After returning to 100% zoom, rotating to landscape changes the zoom to a non-100% value, and rotating back to portrait retains the incorrect zoom level.

My website ccflood.us is a simple map that uses a CSV file for the data that is displayed on the map. It uses the ESRI JS API. Recently the points on the map began missing the text in the boxes only on Apple devices that have been upgraded to iOS 18. Has anyone also had this happen to their site? If you have upgraded to iOS 18, try this site on your iPhone then look at it on an Android phone or your desktop browser. You should seet the values in the boxes and a "+" at points that have no value. If you've had this happen with your site or have heard of a fix, please reply to this post.