Hello Team, We’ve recently started receiving reports from our customer base (Trellix) regarding issues with Full Disk Access (FDA) for Trellix binaries on macOS devices running Tahoe 26.1 (released on November 3, 2025). The issue occurs when users attempt to add Trellix CLI binaries under FDA to grant the required permissions; the binaries fail to appear under the FDA settings, even after selection. Upon further investigation, this appears to be a macOS 26.1–specific issue and not observed in earlier versions. Similar reports have been noted across various forums, indicating that the issue affects multiple binaries, not just Trellix: Some of the discussions on the same issue I see online. https://developer.apple.com/forums/thread/806187 https://developer.apple.com/forums/thread/806156 https://forum.logik.tv/t/macos-26-1-installation-issue-wait-before-updating/13761 https://www.reddit.com/r/MacOS/comments/1os1ph3/cant_add_anything_to_privacy_security_full_disk/ I have also logged FB21009024 for the same. We would like to understand when we can expect this to be fixed, since the issue persists even in 26.2 Beta and also whether the workaround of dragging and dropping the binaries can still be suggested?

I noticed, that even though my AutoFill Credential Provider Extension works with Safari for both Passwords and Passkeys, it doesn't work in context menus inside arbitrary textfields, meanwhile the same is true for the Apple Passwords app. This is a great hit to AutoFill productivity, as my extension is unable to fill textfields by just going to the context menu and clicking AutoFill > Passwords.. Is this a feature only available to Apple via private APIs, or is this something I can interface with? I checked and the Passwords app does use some undocumented but non-private entitlements: [Key] com.apple.authentication-services.access-credential-identities [Value] [Bool] true I also checked the responsible executable for some hints (AutoFillPanelService) however found nothing that would lead me to believe this is a public extension point. Another idea I had was trying to use a macOS Service for this, however Services in the "General" category won't show up in any context menu, only in the Application's Main Menu.

Hello everyone. Hope this one finds you well) I have an issue with integrating a FIDO2 server with ASAuthorizationController. I have managed to register a user with passkey successfully, however when authenticating, the request for authentication response fails. The server can't validate signature field. I can see 2 possible causes for the issue: ASAuthorizationPlatformPublicKeyCredentialAssertion.rawAuthenticatorData contains invalid algorithm information (the server tries ES256, which ultimately fails with false response), or I have messed up Base64URL encoding for the signature property (which is unlikely, since all other fields also require Base64URL, and the server consumes them with no issues). So the question is, what encryption algorithm does ASAuthorizationController use? Maybe someone has other ideas regarding where to look into? Please help. Thanks)

To use passkeys, you need to place the correct AASA file on the web server and add an entry in the Entitlements.plist, for example webcredentials:mydomain.com. This is clear so far, but I would like to ask if it's possible to set this webcredentials in a different way in the app? The reason for this is that we are developing a native app and our on-premise customers have their own web servers. We cannot know these domains in advance so creating a dedicated app for each customer is not option for us. Thank you for your help!

Hi folks We have a Developer ID Application which we create using electron. We made our last release for our Application on Nov'24 which was correctly working. Using the same code, we tried creating a notarized application again which started showing the following error while opening our Application. Monterey- M2- When we directly run the dmg on the dev machine, it does not give us the prompt. But if we download it from somewhere and run, the prompt comes up even in dev machine. We executed some commands to verify the notarization: 1- spctl --assess -vv /Applications/Refresh\ Pro.app On both dev machine and non-dev machine, the output was "accepted" /Applications/Refresh Pro.app: accepted source=Notarized Developer ID origin=Developer ID Application: Prograde Digital Incorporated (*******) 2- xcrun stapler validate /Applications/Refresh\ Pro.app On dev machine, we executed this command and the output is as follows. Processing: /Applications/Refresh Pro.app The validate action worked! 3- codesign -vvv --deep --strict /Applications/Refresh\ Pro.app/ /Applications/Refresh Pro.app: valid on disk /Applications/Refresh Pro.app: satisfies its Designated Requirement We have created a bug attaching the dmg. Please suggest anything we can try to make the release out the door. Bug link- https://feedbackassistant.apple.com/feedback/16811025

If a user triggers account revoke on their Apple ID—but does not perform an in-app account deletion—will Apple send a server-to-server notification to inform us of this revoke event? Additionally, in this scenario, if the user later wants to restore access to their existing game account data (for example, by re-binding Sign in with Apple or switching to another login method), are developers expected to restore all previously linked game data, or should the revoke event be treated as a permanent loss of authorization?

Hi, I'm trying to implement web-browser SignIn with Apple with my new app. I'm trying to "Associate your website to your app" like described in this doc: https://developer.apple.com/help/account/capabilities/configure-sign-in-with-apple-for-the-web So I created a Service ID for this specific login. I want this login page to display my app icon and name when presented to users. My issue: When I associate my new app the the service, the link is somehow not working. The login page show the "service" login (with a generic apple logo and the Service ID's name) instead of the actual App name. I'v been able to link my new service to older apps succesfully !!! (the login page correctly shows the old apps icons and names) Why is my new app not associated with the service ? I am missing something here ? is there an additionnal step that I need to take in order to link the service to my newest app ? Thanks !

Hello, I am using the prf extension for passkeys that is available since ios 18 and macos15. I am using a fixed, hardcoded prf input when creating or geting the credentials. After creating a passkey, i try to get the credentials and retrieve the prf output, which works great, but i am getting different prf outputs for the same credential and same prf input used in the following scenarios: Logging in directly (platform authenticator) on my macbook/iphone/ipad i get "prf output X" consistently for the 3 devices When i use my iphone/ipad to scan the qr code on my macbook (cross-platform authenticator) i get "prf output Y" consistently with both my ipad and iphone. Is this intended? Is there a way to get deterministic prf output for both platform and cross-platform auth attachements while using the same credential and prf input?

I'm looking to implement USB monitoring for FIDO2 authentication through a custom Authorization Plugin, specifically for the below ones. This plugin applies to the following macOS authorization mechanisms: system.login.console — login window authentication system.login.screensaver — screensaver unlock authentication The goal is to build a GUI AuthPlugin, an authorization plugin that presents a custom window prompting the user to "Insert your FIDO key”. Additionally, the plugin should detect when the FIDO2 device is removed and respond accordingly. Additional Info: We have already developed a custom authorization plugin which is a primary authentication using OTP at login and Lock Screen. We are now extending to include FIDO2 support as a primary. Our custom authorization plugin is designed to replace the default loginwindow:login mechanism with a custom implementation. Question: Is there a reliable approach to achieve the USB monitoring functionality through a custom authorization plugin? Any guidance or pointers on this would be greatly appreciated.

Hi. I enter a password using the security command at the command line. It appears in the keychain access app, but not in the passwords app. I don't understand why. rickhedin@Ricks-MacBook-Pro zalando % security add-generic-password -U -s "birds" -a "cats" -w "dogs" rickhedin@Ricks-MacBook-Pro zalando % rickhedin@Ricks-MacBook-Pro zalando % security find-generic-password -s "birds" -wa "cats" dogs rickhedin@Ricks-MacBook-Pro zalando % I'm told the two apps are two views of the same data, so I guess some filter must be being applied?

Why can’t sandboxed mac app store apps have full disk access available in the system settings for full disk access? I discovered mac app store apps in release mode cannot access the ai auggie command line program and other command line programs like opengrep on your system. Debug builds fine. I came up with a workaround: Since I have an ssh client built in for connecting to remote servers, why not connect to ssh on the same local machine… Ask the user for their username and password in a popup. To do this, you have to enable remote login on your mac in system settings -> sharing. In addition you must grant full disk access to cli ssh in system settings: add /usr/libexec/sshd-keygen-wrapper It all works, but I don’t see the cli program in mac settings. To remove the cli program you must run a command line program to remove all full disk access support from all apps. No way to just undo ssh. So my question is, even though I got CodeFrog all working for a mac app store release, should I not do it because it’s insecure or too complicated with the system settings? Should I instead sell the app off the store like Panic Nova? Need some advice. I have not implemented in app purchases yet. Should I just have a reality check and sell the app off the store, or try for app store approval? Bummer… Maybe I’m ahead of my time, but perhaps Apple could review the source code for apps requesting full disk access and make sure there’s nothing fraudulent in them. Then, developer tools app store apps could be in the store with the user’s assurance that nothing is happening behind the scenes that is scary. From: https://blog.greenrobot.com/2025/11/10/i-have-a-decision-to-make/ Related post: https://developer.apple.com/forums/thread/806187 I submitted a code level tech support question for this. They directed me here.

Hi everyone, I’m looking for clarification on best practices for storing API keys in an iOS app — for example, keys used with RevenueCat, PostHog, AWS Rekognition, barcode scanners, and similar third-party services. I understand that hard-coding API keys directly in the app’s source code is a bad idea, since they can be extracted from the binary. However, using a .plist file doesn’t seem secure either, as it’s still bundled with the app and can be inspected. I’m wondering: What are Apple’s recommended approaches for managing these kinds of keys? Does Xcode Cloud offer a built-in or best-practice method for securely injecting environment variables or secrets at build time? Would using an external service like AWS Secrets Manager or another server-side solution make sense for this use case? Any insights or examples of how others are handling this securely within Apple’s ecosystem would be greatly appreciated. Thanks for considering my questions! — Paul

Hello Apple Developer Support, I am experiencing an issue with Apple Sign-In and Private Relay across two separate organizations. I have a web application that supports Apple Sign-In, configured under organization ID: 62P86SVLK4. Users can log in using their Apple accounts with the Hide My Email (Private Relay) feature enabled. This web application was created a long time ago and initially only had a web component. Recently, we developed a native mobile version of this application, which also supports Apple Sign-In. However, due to business constraints, the mobile application was created under a different organization ID: T6JT35U9NW. The Issue Since the web and mobile applications are registered under different organizations, accounts created using Apple Sign-In with Private Relay are not recognized across both applications. For example: A user creates an account in the web app using Apple Sign-In with Private Relay. When they attempt to log in to the mobile app with Apple Sign-In (also using Private Relay), authentication fails because the generated Private Relay email addresses do not match between the two organizations. Question Is there any way to link Private Relay accounts across these two organizations so that users who signed up on the web application can log in to the mobile application seamlessly? I appreciate any guidance on how to resolve this issue. Best regards, Kamil Gronert

I'm a bit confused about if using App Attest is possible in enterprise builds. It shows up under identifiers in the apple dev portal and I can add it to my provisioning file and entitlements file. But if I go to keys I cannot create a key for it. This page implies it can be used for enterprise builds: After distributing your app through TestFlight, the App Store, or the Apple Developer Enterprise Program, your app ignores the entitlement you set and uses the production environment.

Hi, is it somehow possible to access a key that was generated by the DCAppAttestService generateKey() function? I need to be 100% sure that no actor from within or outside of my app can access the generated key with the DeviceCheck Framework. It would also be helpful to get some official resources to the topic. Thank you in advance, Mike

Hello, I'm an application developer related to Apple system extensions. I developed an endpoint security system extension that can run normally before the 14.x system. However, after I upgraded to 15.x, I found that when I uninstalled and reinstalled my system extension, although the system extension was installed successfully, a system warning box would pop up when I clicked enable in the Settings, indicating a failure. I conducted the following test. I reinstalled a brand-new MAC 15.x system. When I installed my applications, the system extensions could be installed successfully and enabled normally. However, when I uninstalled and reinstalled, my system extension couldn't be enabled properly and a system warning popped up as well. I tried disabling SIP and enabling System Extension Developers, but it still didn't work. When the system warning box pops up, I can see some error log information through the console application, including an error related to Failed to authorize right 'com.apple.system-extensions.admin' by client '/System/Library/ExtensionKit/Extensions/SettingsSystemExtensionController.appex' [2256] for authorization created by '/System/Library/ExtensionKit/Extensions/SettingsSystemExtensionController.appex' [2256] (3,0) (-60005) (engine 179) as shown in the screenshot. The same problem, mentioned in Cannot approve some extensions in MacOS Sequoia , but there is no solution

Hello everybody, in my React Native-Expo-Firebase app, I am trying to integrate Sign in with Apple, along with the related token revocation at user deletion. I did succeed in integrating the login, and the app correctly appears in the Apple Id list (the list of apps currently logged with Apple ID). The problem is that, if I select the app and press "Interrupt Apple login usage for this app", the app simply stays there, nothing happens. If I do the same with another app, this works fine. Either if I do this via my iPhone's settings, or via https://account.apple.com/account/manage -> Sign in with Apple, I get the same result, the app cannot be removed. I hope I managed to explain my situation clearly, I'd be happy to provide more info if necessary. Thank you in advance.

We are currently trying to fix a bug when using SignIn with Apple. It appears that on some occasions we are not receiving a user's profile info (name, email) when a new account is created. After doing some investigation we believe this bug is due to the same Apple login being used as an already deleted account. ASF only appears to send profile info the very first time an Apple login is used. If that account is deleted and another is created with the same apple login we won't receive the profile info. As a result we are not in compliance with Apple's guidelines requiring that we use the provided profile info with Apple SigIn, and need to prompt users to enter it again. Is there a process in place to properly "clear" a user after their account is deleted in our system, so that the next time a user creates an account with the same Apple login, we receive their profile info again?

Hey all, Question for the masses.... Does the Yubikey authentication have a OS dependency and it only works with a stable, public OS? Does Azure/Okta/Yubikey beta OS26? My CEO installed iPadOS 26 on his iPad and was not able to authenticate via Yubikey into our company environment. I ran the same scenario on my iPad using iPadOS 26 and I had the same results. Downgrading to iPAdOS doesn't pose these issues. I'm assuming something isn't fine-tuned yet?

I'm working on integrating Passkey functionality into my iOS app (targeting iOS 16.0+), and I'm facing an issue where the system dialog still shows the "Save to another device" option during Passkey registration. I want to hide this option to force users to create Passkeys only on the current device. 1. My Current Registration Implementation Here’s the code I’m using to create a Passkey registration request. I’ve tried to use ASAuthorizationPlatformPublicKeyCredentialProvider (which is supposed to target platform authenticators like Face ID/Touch ID), but the "Save to another device" option still appears: `// Initialize provider for platform authenticators let provider = ASAuthorizationPlatformPublicKeyCredentialProvider(relyingPartyIdentifier: domain) // Create registration request let registrationRequest = provider.createCredentialRegistrationRequest( challenge: challenge, name: username, userID: userId ) // Optional configurations (tried these but no effect on "another device" option) registrationRequest.displayName = "Test Device" registrationRequest.userVerificationPreference = .required registrationRequest.attestationPreference = .none // Set up authorization controller let authController = ASAuthorizationController(authorizationRequests: [registrationRequest]) let delegate = PasskeyRegistrationDelegate(completion: completion) authController.delegate = delegate // Trigger the registration flow authController.performRequests(options: .preferImmediatelyAvailableCredentials)` 2. Observation from Authentication Flow (Working as Expected) During the Passkey authentication flow (not registration), I can successfully hide the "Use another device" option by specifying allowedCredentials in the ASAuthorizationPlatformPublicKeyCredentialAssertionRequest. Here’s a simplified example of that working code: let assertionRequest = provider.createCredentialAssertionRequest(challenge: challenge) assertionRequest.allowedCredentials = allowedCredentials After adding allowedCredentials, the system dialog no longer shows cross-device options—this is exactly the behavior I want for registration. 3. My Questions Is there a similar parameter to allowedCredentials (from authentication) that I can use during registration to hide the "Save to another device" option? Did I miss any configuration in the registration request (e.g., authenticatorAttachment or other properties) that forces the flow to use only the current device’s platform authenticator? Are there any system-level constraints or WebAuthn standards I’m overlooking that cause the "Save to another device" option to persist during registration? Any insights or code examples would be greatly appreciated!