So I have web Augmented Reality apps hosted on AWS S3. It worked fine for a month, but as soon as the IOS 18.4 update was installed they stopped working. It works on every other device and IOS versions. The URLs for the mentioned AR experiences: digitechonline.in/solsprefimaginewt8/ digitechonline.in/solsprefimaginewt8p2/ digitechonline.in/orocarear/ These AR experiences get stuck on the loading screen and either reload or give an error. Ideally the camera is supposed to open. I have tested it on Safari, Microsoft Edge and Google Chrome browsers. They were created through Unity webgl and hosted on AWS S3 bucket. Please provide a quick solution to this.

I'm not loving the huge Favorites icons in Safari on MacOS 26, is there a way to reduce the size of them so that we can see more favorites on the list without scrolling down?

Issue Description I'm developing a hybrid iOS app and encountering WebView bridge communication issues after updating to Xcode 16 with iOS 18 SDK. App Architecture AViewController: Initial view controller displayed at app launch Handles WebView setup and web-to-native bridge communication Pushes BViewController when receiving "B" bridge message from web BViewController: View controller stacked on top of AViewController Managed by navigation controller AViewController's WebView continues bridge communication even when BViewController is active Problem Behavior Xcode 15 (iOS 18): WebView bridge communication in AViewController works normally while BViewController is active Xcode 16 (iOS 18 SDK): Server communication breaks or hangs without response while BViewController is active Communication resumes only after popping back to AViewController from BViewController Questions Is the current architecture (configuring WebView in AViewController and maintaining bridge communication through AViewController's WebView while BViewController is presented) not a recommended pattern? Is Xcode 16's iOS 18 SDK the cause of this issue? If so, could you help me understand which specific changes are affecting this behavior? This is urgent as we need to deploy soon. I would greatly appreciate a prompt response.

Actually this is a duplicate for https://developer.apple.com/forums/thread/106537 but in web-specific forums section. Is there any video/audio codec best practices, guides, recommendations for app/web developers for best performance (take advantage from HW acceleration), power consumption saving? What are officially supported media containers? What are video encoding profiles, video dimensions, frame rates? The only official source I have found is https://developer.apple.com/documentation/webkit/delivering-video-content-for-safari?language=objc. But h264 is pretty old. I experimentally found that the VP9 video format is also supported on iOS newer versions. But is this a requirement? Сan i be sure that the video will play on all devices? My goal is to provide web media content (which will be rendered in my application using WKWebView API) that will be supported by most devices (both iOS and MacOS), takes advantage of such features as hardware decode acceleration and be efficient. Any hints/info is highly appreciated. Best regards.

Dear Apple Developer Support, We are currently developing a system that requires the ability to edit Japanese vertical text within the Safari browser on iPhone. During our investigation, we encountered an issue that matches the following WebKit bug: 283620 – Caret Positioning Issues in Vertical Writing Mode We understand that this issue is being addressed in the following pull request: https://github.com/WebKit/WebKit/pull/39939 However, it appears that a complete fix has not yet been implemented. Given this situation, we would like to confirm the following: Is there any known workaround for this issue in iOS 17.5 or iOS 18.5 (the latest versions as of now)? If a workaround exists, could you please provide details? If not, could you share the expected timeline for a full resolution of this issue? Although this appears to be an open-source WebKit issue, we are reaching out to Apple because WebKit is tightly integrated with iOS and Safari, and ultimately delivered as part of the iPhone experience. Thank you very much for your support. Best regards, Takao Kurabayashi

How can I make a background image take the entire screen in ios26? I've tried position fixed, sticky, env() css variables but nothing worked. It does it when in PWA mode, but I would like to do so in the browser too.

Is there any supported mechanism in Safari Web Extensions (MV3) for capturing or logging network request data (like fetch, XHR, or webRequest) triggered by the web page?

My app has been published by 2 months now I still I cant get Universal Links to work. I checked a lot of docs as well as videos about setting up universal links. Everyone with clear steps: Add the well-known json file to the server. Already validated by AASA web validator. Add the Associated domain on project capabilities, with the Web page root only. Eg: applinks:example:com. Install the app and trying clicking a link from notepad. Or instead make a long press to deploy contextual menu to see if my app is on the selectable options to open the link. My app is not been open in any of my attempts and the console always trying to use safari. I had a couple of screenshots of my testing. I really need help with this.

I’ve been working on a personal iOS project for fun — essentially a YouTube music player, learning how background media playback works in native iOS apps. After seeing that Musi (a famous music streaming app) can play YouTube audio in the background with the screen off — I got really curious. I’ve been trying to replicate that basic background audio functionality for YouTube embeds using WKWebView. I've spent a crazy amount of time (probably 20 hours) trying to figure this out but have achieved no success. Here’s what I’ve tried so far: -Embedding a YouTube video in a WKWebView -Activating AVAudioSession with .playback and setting .setActive(true) -Adding the UIBackgroundModes key with audio in Info.plist -Adding the NSAppTransportSecurity key to allow arbitrary loads --Testing on a real device (iPhone 14, iOS 18.1 target)-- What happens: Audio plays fine in the foreground. If I exit the app and go to the lock screen quickly enough (less than 3 seconds) after pressing play, I can resume playback briefly from the lock screen — but it doesn’t automatically continue like in Musi and other apps like it. Most of the time, the audio stops when the app is backgrounded. I get this error consistently in the logs: Error acquiring assertion: <Error Domain=RBSServiceErrorDomain Code=1 "(originator doesn't have entitlement com.apple.runningboard.assertions.webkit AND originator doesn't have entitlement com.apple.multitasking.systemappassertions)" It seems like the app lacks some specific entitlements related to WebKit media playback. I don’t have AppDelegate/SceneDelegate (using SwiftUI), but can add if needed. I’m super curious how music streaming apps using youtube as a source get around this — are they doing something different under the hood? A custom player? A SafariViewController trick? Is there a specific way to configure WKWebView to keep playing in the background, or is this a known limitation? Would really appreciate any insight from folks who’ve explored this before or know how apps like Musi pulled it off. Thanks in advance!

After the first installation (out of AppStore) of the extension in the browser, the content script is correctly inserted into the page (twice for some reason) and a message is sent from the root of the content script to the background script, which responds correctly. However, if an event handler is registered within the content script, within which the message is also sent to the background script, it will never reach the background script. window.addEventListener("message", function (event) { // We only accept messages from ourselves if (event.source !== window) { return; } if (event.data.source && event.data.source === appIdentification) { browser.runtime.sendMessage(event.data); } }, false); It does not matter with what delay the event handler is called (i.e. the background script is not asleep). If I refresh the page or close and reopen the browser and reload the page, everything works correctly and the message sent from the event handler is already delivered to the background script. The event handler is used so that the extension code is uniform for all browsers (Chrome, Safari, Edge, Opera, Firefox), i.e. it is not intended to use externally_connectable for sending messages from the webpage directly to the background script, which Safari should support. The expected behavior is that the extension will work even after the first installation, as is the case with other browsers. Procedure: Enter the test website: https://www.mssf.cz/testapp/check_client.aspx Do the initial installation of the extension (could be downloaded from here: https://1drv.ms/f/c/76f4c93826df41a0/Ej5MQX9ctyhHv_P9_t_6uAwB05ET-nzXuMhPeu56nOgkWg?e=cudqRJ) Set a breakpoint in the event handler for "message" within the content script, open the background script and set a breakpoint in the event handler for onMessage Click on the "Validate certificate" button on the page loaded in point 1 Step through the content script to the point where the message is sent to the background script, the breakpoint within the background script is never hit, which is an error, the message should come to the background script

I want to confirm the specifications and behavior of Safari. We have a system built on Microsoft Azure that uses Azure AD B2C for authentication. When we logging in, there is a phone authentication feature where a call is made to the registered phone number. However, this phone authentication does not work properly only on iPhone's Safari. The specific situation is listed below: When performing phone authentication on iPhone's Safari, a call is made from Azure AD B2C, and pressing the # button on the Safari screen can be done. But then, it transitions to an error screen. We tried multiple iPhone devices and multiple iOS versions, but the result was the same. But when accessing the system on a PC, and performing phone authentication, it works without any errors. Also when we use browsers other than Safari (for example, Google Chrome and Firefox) on the iPhone, the phone authentication works without any errors, too. Even with Safari, if the device displaying the login screen and the device making the call are different, phone authentication works without any errors, too.(it fails if they are the same device). We reached out Microsoft about this issue, and they responded that: The Azure resource called FrontDoor at the front end of Azure AD B2C supports the HTTP/2 protocol, and HTTP/2 protocol is used in communication with Safari. In Safari's HTTP/2 communication, when a call is received while the screen is displayed, a reset packet is sent to the web server (in this case, the web server is FrontDoor). This interrupts the session, causing a session termination error on the Azure AD B2C side, and phone authentication fails. Therefore, we would like to ask you the following two points: In HTTP/2 communication, does the Safari browser send a reset packet to the web server when it receives a phone call? If so, what is the cause of this behavior? And are there any measures to prevent the reset packet from being sent?

We are encountering a download issue in Safari 18.2 on macOS Sequoia 15.2 where file downloads initiated by our AngularJS application (such as Excel exports) are silently blocked. There are no errors in the browser console, and the download does not occur. Interestingly, after testing on Safari 18.3 with Sequoia 15.3, the downloads worked as expected. However, the problem reappeared on Safari 18.4 with Sequoia 15.4. We suspect that recent changes in Safari’s security or download handling may be preventing downloads triggered via asynchronous JavaScript (e.g., AJAX calls) that are not initiated directly by user interaction. We would appreciate any insights, suggestions, or possible workarounds from the community. Looking forward to your guidance on this matter.

It seems that in iOS 18.5+ built with Xcode 16.4+, there has been a breaking change since 18.4 with 16.3 within WebKit and how the navigationAction.sourceFrame property is initialized when implementing the decidePolicy delegate method. The flow goes: Implement a WKNavigationActionDelegate with decidePolicy Call WKWebView.loadHTMLString("some-string", baseURL: nil) Upon loading the HTML content, read the value of navigationAction.sourceFrame within the decidePolicy method of the WKNavigationActionDelegate On iOS 18.4 (and below) with Xcode 16.3 (and below); navigationAction.sourceFrame is <uninitialized> On iOS 18.5+ with Xcode 16.4+: navigationAction.sourceFrame is already initialized and is equal to navigationAction.targetFrame It appears that this change was made between minor versions of Xcode and is unexpected behavior of a minor version. Not only was this not called out in the release notes for Xcode 16.4 and iOS 18.5, but it's technically also a breaking change to the WebKit API. Can we get insight on why this change was made and what Apple's policy is on breaking changes between minor versions of Xcode/iOS?

Dear Apple Developer Support Team, I am writing regarding critical issues we are facing with Safari web push notifications in our application iLiveMyLife.io, which is severely impacting our ability to maintain reliable communication with our users. Issue Description: We are experiencing persistent problems with Safari push notification tokens expiring or becoming invalid without any notification to our server. This creates several critical issues: Users stop receiving notifications without any indication of failure Our notification delivery system has no way to detect token expiration The expiration appears to happen frequently (seemingly almost daily in some cases) There is no reliable mechanism to re-establish push communication without users manually revisiting the app Technical Impact: Our messaging functionality becomes completely unreliable We must resort to email or SMS as fallback mechanisms, which is not feasible for a real-time communication platform This makes building any reliable messaging application on Safari practically impossible The Broader Context: What makes this situation particularly challenging is that all potential alternative browser APIs that could help address this issue appear to be deliberately disabled or restricted in Safari: Background Service Workers don't function in the background on iOS Safari Background Sync API is not supported WebSockets cannot operate when the app is closed There's no way to programmatically check the validity of push tokens The combination of these limitations creates a situation where developers have no viable technical path to build reliable notification systems for PWAs on Safari. This appears to be a systematic restriction rather than individual API limitations. Requested Information: Is there a recommended approach to detect Safari push token expiration? Are there alternative notification mechanisms for PWA applications on Safari that offer more reliability? Is there documentation on the lifecycle of Safari push tokens that could help us implement proper handling? Are there plans to improve the Web Push API implementation in Safari to address these reliability issues? Could you clarify if these limitations are intentional design decisions or technical constraints that might be addressed in future updates? Business Impact: This issue fundamentally undermines our platform's core functionality. For a collaborative tool, reliable notifications are essential - users cannot collaborate effectively if they miss updates because their push tokens silently expired. The current state creates confusion among our users, who don't understand why they suddenly stop receiving notifications. Any guidance or assistance you could provide would be greatly appreciated. We're committed to providing an excellent experience on Safari, but the current push notification limitations make this extremely challenging. Thank you for your time and consideration. Best regards, Ilya

Our app uses ASWebAuthenticationSession for login. This launches an incognito (ephemeral) browser window of the system’s default browser with the authentication URL. Recently, on the latest macOS Tahoe, we observe that: The browser application is launched(we could see in the dock) But the authentication window with the URL does not appear No error is returned to the app (silent failure)

Hi everyone, I'm exploring the new app icon appearance options (Clear, Dark, Tinted) for Progressive Web Apps (PWAs) on iOS26, iPadOS26, and macOS26. Currently, PWA icons don't seem to render well with these new appearances, particularly in Clear and Tinted modes, resulting in very very poor visual quality. You can hardly see anything. Has support for these icon appearances been fully implemented for PWAs? If so, could someone point me to the relevant Apple Developer documentation or provide guidance on how to configure PWA icons to support Clear, Dark, and Tinted appearances? I've searched the Apple Developer Forums, Stack Overflow, and Reddit but haven't found clear information on this topic.A possible solution is a png file with transparent areas, but if the pattern is dark, nothing will be visible in dark mode. Any insights or resources would be greatly appreciated. Thanks! (plz don't give up on PWA😭) Reference: https://developer.apple.com/forums/thread/761615 https://stackoverflow.com/questions/78780916/is-there-a-way-to-provide-light-dark-and-tinted-variants-of-apple-touch-icon https://developer.apple.com/library/archive/documentation/AppleApplications/Reference/SafariWebContent/ConfiguringWebApplications/ConfiguringWebApplications.html

iOS 18.4 introduces the new WKWebExtension API to support extensions in WKWebView. However, for extensions that have migrated to Manifest V3 and use an extension service worker as the background script, it's currently not possible to inspect them through Safari. This is only thing I can see, I don't know how to inspect the details of the "background.js" I'm wondering—has this changed? Is it now possible to inspect extension service workers?

Based on the "Build immersive web experiences with WebXR"-Video for visionOS there is no way to disable the consent prompts for entering an immersive experience or consent hand-tracking. For the microphone it's possible to "greenlight" specific websites for mic input, which works great. I'd welcome it, if it were possible to add specific websites in the settings, in which those consent dialogs aren't shown each time. In my opinion, the user interaction through a button that launches the experience would be sufficient to not disorient.

Hello I am trying to release an app, dealing with storing, delivering, and maintaining outdoor activity euqipememts. On web, I used widget provided by TOSS, which is a Korean banking application. Due to lack of time I have use lazy method User taps the “Pay” button ↓ Backend generates a payment URL (Toss Payments) ↓ Open the payment page in an external browser (Safari) ↓ User completes the payment in Safari ↓ Return to the app via deep link (borini://payment/success) ↓ Call the payment approval API ↓ Display the payment completion page I have hear such method is possible for our type of service which deals with real life goods. So I would love to know if it is actually possible or will I have to make a new payment method using apple provided payment method in order to pass APP Store Connect review before releasing application

Safari Extension Error: “Non-persistent background content cannot listen to webRequest events.” after macOS 15.4 / Safari 18.4 Update We’re seeing the following error in the Safari Extensions tab after updating to macOS 15.4 and Safari 18.4: “Non-persistent background content cannot listen to webRequest events.” This error did not appear prior to the update, and we haven’t found any official documentation stating that webRequest API is no longer supported in Safari. In our extension (Manifest V3), we are using the webRequest.onHeadersReceived callback to intercept response headers and read updated cookies. While the functionality itself still works as expected. we’re able to access the response headers and this error is now shown in the Extension settings page. We are not seeing this issue in other browsers (Chrome, Firefox) using the same Manifest V3 setup. Is there any plan to deprecate webRequest support in Manifest V3 for Safari? We’d appreciate any clarification or guidance on how to handle this going forward.