I am creating a Safari Web Extension. There are two calls let say, call1 and call2 which gets executed in sequence by browser, call1 gives a 302 type response and redirects to call2. When creating DNR rule for adding "Cookie" in the request header of call1, the same cookie gets added to the request header of call2 as well(Same is the case for other headers/custom headers as-well). Because of this the set-cookie present in response header of call1 is not sent in the request header of call2, and returns 400 response. The same setting is working fine for other browsers chrome & firefox. Is this a bug or DNR works differently for safari ? currently "webRequestBlocking" works in safari for manifest v3, is there any development of it getting removed just like it's removed in chrome in mv3.

Device: iPhone 15pro, ios26.0 (23A 341) IOS version: 26.0 (23A 341) When using position: sticky; bottom: 0, the div is expected to stick to the bottom of the viewport when the browser toolbar hides while scrolling. However, it stops at the height where the toolbar was, instead of moving down with the disappearing toolbar. In the image below, the red-bordered navigation shows the situation where it does not stick to the bottom. i

Hello Apple Developer Community, I'm experiencing an issue with PDF link interaction in WKWebView that appears to be specific to iOS 26. Problem Description: I'm loading a PDF in WKWebView.The links may vary widely and are not necessarily DPF, so I need to load them using WKWebView. On iOS versions prior to 26, links within the PDF are clickable and work correctly. On iOS 26, the same links are not clickable (no response when tapped). Expected Behavior: PDF links should remain clickable and functional across all iOS versions. What I've Tried: Tested opening the PDF directly in Safari on iOS 26 - links still not clickable This suggests the issue might be related to changes in the system's PDF rendering engine Reproduction Steps: Load the PDF URL in WKWebView Navigate to page 12 Attempt to tap the link Environment: Test Devices: iPhone 15(26.0 ) / iPhone 16 Pro Max(18.0.1 ) Xcode: 16.2 Questions: Is this an intentional change in iOS 26's PDF handling or WKWebView? If so, is there a new API or configuration to restore link interactivity? Any guidance or suggestions would be greatly appreciated!

Hi everyone, I'm exploring the new app icon appearance options (Clear, Dark, Tinted) for Progressive Web Apps (PWAs) on iOS26, iPadOS26, and macOS26. Currently, PWA icons don't seem to render well with these new appearances, particularly in Clear and Tinted modes, resulting in very very poor visual quality. You can hardly see anything. Has support for these icon appearances been fully implemented for PWAs? If so, could someone point me to the relevant Apple Developer documentation or provide guidance on how to configure PWA icons to support Clear, Dark, and Tinted appearances? I've searched the Apple Developer Forums, Stack Overflow, and Reddit but haven't found clear information on this topic.A possible solution is a png file with transparent areas, but if the pattern is dark, nothing will be visible in dark mode. Any insights or resources would be greatly appreciated. Thanks! (plz don't give up on PWA😭) Reference: https://developer.apple.com/forums/thread/761615 https://stackoverflow.com/questions/78780916/is-there-a-way-to-provide-light-dark-and-tinted-variants-of-apple-touch-icon https://developer.apple.com/library/archive/documentation/AppleApplications/Reference/SafariWebContent/ConfiguringWebApplications/ConfiguringWebApplications.html

Hi, after upgrading MacOS (MB Air M1 Version 26.2 (25C56)) & Safari (Version 26.2 (21623.1.14.11.9)) to latest versions, we are experiencing a new bug occurring with our web extension (Click & Read) on local storage writing and getting this error : Invalid call to browser.storage.local.set(). Disk I/O error. This doesn't happen on other browsers (chromium, Firefox). export const setLocalStorage = async (value: object) => { try { await browser.storage.local.set(value); } catch (error) { console.error("[Click & Read] Error setting local storage", error); } };

Our team has implemented a video player using the HTML5 tag, but we have identified an issue with loading media files. While Safari on iOS 18.0 downloads each TS file listed in the m3u8 playlist correctly, on iOS 18.4 and 18.5, a single TS file is downloaded repeatedly. Our statistics indicate that approximately six requests are made per second for the same TS file. Is this intended behavior? If not, are there any known workaround or solutions? If this issue is due to the OS or browser, are there any plans to address it in iOS 18.6 or a future release? Could you advise on the proper channel to submit a bug report for this issue? Similar issues have been reported in the past with WKWebView. The previous thread is here: https://developer.apple.com/forums/thread/784134

Hey Guys My PWA video playback and even youtube videos stopped working after updating iOS to 26.0.1. The video thumnails appear fine and if i try to play the video, it remains stuck. If i restart the phone, the video plays for a second in the PWA and then stops again and entire app gets stuck. Request apple team to fix this issue at the earliest. This is hampering all my iOS users who install the PWA on their device homescreen and use it as app. FYI strangely EVERYTHING WORKS FINE ON iOS SAFARI browser including videos playback If i open it as a web app. so this seems like a specific PWA issue on latest ios 26.0.1

I’m observing an intermittent issue with a Safari Web Extension on macOS 15.7 (Safari 26.0.1). After installing the Safari extension from the App Store, it appears under Settings → Extensions, but the enable checkbox is often missing. Sometimes, after restarting Safari multiple times, the checkbox becomes visible. However, even when I manage to enable the extension, reopening Safari often hides the checkbox again. However, I don't see this issue in safari 26 with macOS 26 I’d like to know if this behavior is a known issue with Safari 26 or macOS 15.7? Any workaround available?

Hello, I've got Smart App Banner set up on my website. However, I want to be able to measure the traffic coming from this banner to the app store / app (i.e. measure impressions/downloads). Apple documentation (https://developer.apple.com/help/app-store-connect/view-app-analytics/manage-campaigns/) says you can set up a campaign link and use it in the Smart Banner to track those who download / open the app store page using your smart banner (so that we can get attribution). However, there is no documentation at all in terms of how this should be added to the tag when implementing a Smart App Banner. I've tried so many different variations and none have tracked downloads. This includes a structure based on an example taken from WWDC from a few years back which also did not work. I would appreciate any help!

Starting in iOS 26 (tested on 26.1), when I use any of the “policy” methods of WKNavigationDelegate to return an action policy of cancel I get a trace like this printed to console: 1 0x18de71bbc WebKit::WebFramePolicyListenerProxy::ignore(WebKit::WasNavigationIntercepted) 2 0x18db3dd50 WebKit::NavigationState::NavigationClient::decidePolicyForNavigationAction(WebKit::WebPageProxy&, WTF::Ref<API::NavigationAction, WTF::RawPtrTraits<API::NavigationAction>, WTF::DefaultRefDerefTraits<API::NavigationAction>>&&, WTF::Ref<WebKit::WebFramePolicyListenerProxy, WTF::RawPtrTraits<WebKit::WebFramePolicyListenerProxy>, WTF::DefaultRefDerefTraits<WebKit::WebFramePolicyListenerProxy>>&&)::$_0::operator()(WKNavigationActionPolicy, WKWebpagePreferences*) 3 0x100189e5c $sSo24WKNavigationActionPolicyVIeyBhy_ABIeghy_TR 4 0x100189d38 $s16WebkitPolicyTrap14ViewControllerC03webD0_06decideB3For15decisionHandlerySo05WKWebD0C_So18WKNavigationActionCySo0lmB0VctF 5 0x100189df4 $s16WebkitPolicyTrap14ViewControllerC03webD0_06decideB3For15decisionHandlerySo05WKWebD0C_So18WKNavigationActionCySo0lmB0VctFTo 6 0x18db255c0 WebKit::NavigationState::NavigationClient::decidePolicyForNavigationAction(WebKit::WebPageProxy&, WTF::Ref<API::NavigationAction, WTF::RawPtrTraits<API::NavigationAction>, WTF::DefaultRefDerefTraits<API::NavigationAction>>&&, WTF::Ref<WebKit::WebFramePolicyListenerProxy, WTF::RawPtrTraits<WebKit::WebFramePolicyListenerProxy>, WTF::DefaultRefDerefTraits<WebKit::WebFramePolicyListenerProxy>>&&) 7 0x18dea9848 WebKit::WebPageProxy::decidePolicyForNavigationAction(WTF::Ref<WebKit::WebProcessProxy, WTF::RawPtrTraits<WebKit::WebProcessProxy>, WTF::DefaultRefDerefTraits<WebKit::WebProcessProxy>>&&, WebKit::WebFrameProxy&, WebKit::NavigationActionData&&, WTF::CompletionHandler<void (WebKit::PolicyDecision&&)>&&) 8 0x18dea7a34 WebKit::WebPageProxy::decidePolicyForNavigationActionAsync(IPC::Connection&, WebKit::NavigationActionData&&, WTF::CompletionHandler<void (WebKit::PolicyDecision&&)>&&) 9 0x18d9cbbf4 void IPC::handleMessageAsync<Messages::WebPageProxy::DecidePolicyForNavigationActionAsync, IPC::Connection, WebKit::WebPageProxy, WebKit::WebPageProxy, void (IPC::Connection&, WebKit::NavigationActionData&&, WTF::CompletionHandler<void (WebKit::PolicyDecision&&)>&&)>(IPC::Connection&, IPC::Decoder&, WebKit::WebPageProxy*, void (WebKit::WebPageProxy::*)(IPC::Connection&, WebKit::NavigationActionData&&, WTF::CompletionHandler<void (WebKit::PolicyDecision&&)>&&)) 10 0x18d9c7728 WebKit::WebPageProxy::didReceiveMessage(IPC::Connection&, IPC::Decoder&) 11 0x18e49a0d8 IPC::MessageReceiverMap::dispatchMessage(IPC::Connection&, IPC::Decoder&) 12 0x18df1908c WebKit::WebProcessProxy::dispatchMessage(IPC::Connection&, IPC::Decoder&) 13 0x18d9dfc28 WebKit::WebProcessProxy::didReceiveMessage(IPC::Connection&, IPC::Decoder&) 14 0x18e47f72c IPC::Connection::dispatchMessage(WTF::UniqueRef<IPC::Decoder>) 15 0x18e47fac4 IPC::Connection::dispatchIncomingMessages() 16 0x199ad3758 WTF::RunLoop::performWork() 17 0x199ad4eb0 WTF::RunLoop::performWork(void*) 18 0x1804563a4 __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION__ 19 0x1804562ec __CFRunLoopDoSource0 20 0x180455a78 __CFRunLoopDoSources0 21 0x180454c4c __CFRunLoopRun 22 0x18044fcec _CFRunLoopRunSpecificWithOptions 23 0x1926be9bc GSEventRunModal 24 0x18630f0d8 -[UIApplication _run] 25 0x186313300 UIApplicationMain 26 0x18554ac38 block_destroy_helper.15 27 0x10018a70c $sSo21UIApplicationDelegateP5UIKitE4mainyyFZ 28 0x10018a67c $s16WebkitPolicyTrap11AppDelegateC5$mainyyFZ 29 0x10018a818 __debug_main_executable_dylib_entry_point 30 0x1000cd3d0 29 dyld 0x00000001000cd3d0 start_sim + 20 31 0x1002bab98 30 ??? 0x00000001002bab98 0x0 + 4297829272 This doesn’t happen in 18.6. Also, it doesn’t seem to have any negative consequences other than the console spam? But then, the navigation is being cancelled anyway, so maybe it’s trapping and just happens to have the effect of not loading the request? Anyway, I guess I can’t upload zips. But it’s pretty easy to reproduce. Just assign a WKWebView a navigationDelegate with an implementation like: func webView(_ webView: WKWebView, decidePolicyFor navigationAction: WKNavigationAction, decisionHandler: @escaping @MainActor (WKNavigationActionPolicy) -> Void) { decisionHandler(.cancel) } and then have it .load() anything. Have I been doing this wrong and 26 exposes it? Or is this a bug in 26? If the latter, any downstream consequences I should be looking out for? macOS 15.7.1 (24G231) Xcode 26.1.1 (17B100) iOS 26.1 (23B86)

Create shortcut to open chrome with url and put it on the desktop. Tap the shortcut. Tap the username text field. When launching Safari from an iOS shortcut on an iOS device with a valid passkey registered, the passkey suggestion does not appear; instead, the password suggestion appears sometimes.

WKWebView has a new property "isBlockedByScreenTime" since iOS 26. But I do not yet understand when exactly this property could be used. When I setup content-based restrictions in the ScreenTime settings then WKWebView reports an error 105 via "webView:didFailProvisionalNavigation:" delegate. The isBlockedByScreenTime property still returns false in this case. If ScreenTime has a time-based limit, the App would not run at all. Under which circumstances would the property "isBlockedByScreenTime" return the value true? When exactly and for what can this property be actually used? The "problem" is that I want to find if a web page is blocked and can not be loaded, why this is the case. By simply trial and error I found out that WKWebView returns error codes 104 and 105 for blocked web sites because of content filters and Screen Time restrictions, however these error codes are not documented at all (at least I've not found any documentation or documentation for these error codes and also some other codes like 100, 102, 204 etc), so I'm not really sure if I handle all cases correctly. I hoped that isBlockedByScreenTime would at least tell me one reason for blocked pages. If there are documents which explain these error codes (100 and above), where I can find these?

Hi there I've been having trouble finding any details around how safari is supposed to behave when a FairPlay license expires. My assumption was that the video segments would stop getting decrypted and playback would stop, however I just see that the playback continues like nothing has happened. I've setup the "fps_safari_has_key_renewal.html" sample code from the Fairplay SDK and got encrypted playback working. The renewal method also appears to work. However, if I don't issue a renew call, or if I wait several minutes after the renew has succeeded the video never stops (my license is set with a 1 minute expiry so I can test this quickly). I've also observed that the MediaKeySession expiration property is always set to NaN even though my license has an expiry. I've tried with both Lease and Rental expiries set in the license (separately AND at the same time in separate tests). I'm using EZDRM as my drm provider. Just looking for some feedback on if this is supposed to work this way in safari or if license expiry isn't supported in safari. Thanks!

Typically, you can use the @@extension_id special string to reference the absolute path into the bundled resources of an extension, such as an image or a custom font, in a CSS file. However, this broke with Safari 18. Consider this section in a popup.css file: .card-icon { height: 16px; width: 20px; background-image: url(safari-web-extension://__MSG_@@extension_id__/images/card.svg); background-size: 20px 16px; } In Safari 17.4, once loaded in the browser, @@extension_id is replaced with E8BEA491-9B80-45DB-8B20-3E586473BD47, and the background-image reads as so: background-image: url(safari-web-extension://E8BEA491-9B80-45DB-8B20-3E586473BD47/images/card.svg); But as of Safari 18, the @@extension_id just collapses to an empty string, and the background-image reads as so: background-image: url(safari-web-extension:///images/card.svg); and the svg fails to load with the following error: "Failed to load resource: You do not have permission to access the requested resource." This is a regression, does to match the behavior of the other major browsers, and should be fixed. Filed with Feedback ID: FB15104807

Ever since the iOS and iPadOS 26.2 beta I can’t open Safari at all. Safari tries to open but crashes and goes back to my home screen. I’ve restored my devices and restarted everything and the same issue occurs. I didn’t have this problem on the beta 26.1 but this whole thing started on 26.2.

YouTube now requires a Referer to be sent to be able to embed Youtube videos, otherwise the videos won't work. But WKWebView doesn't send a Referer when using a custom scheme, so Youtube videos stopped working in that case. This affects Ionic apps, both using Cordova or Capacitor. There's an open issue for Cordova and another one for Capacitor. In these apps, the app is served using a custom scheme like capacitor://localhost or ionic://localhost. I tried modifying the Ionic WebView source code to force adding a referrer to the URL loaded using WKWebView's loadRequest: [request addValue:@"https://my.test.app" forHTTPHeaderField:@"Referer"]; [_engineWebView loadRequest:request] But the Referer is still not sent in the Requests, I guess because the app is using a custom scheme (e.g. capacitor://localhost). However, if I modify this code to force loading an "online URL" (using https) instead of capacitor://localhost, then the my.test.app Referer is sent to the requests. Is there any way to make WKWebView send a Referer when using a custom scheme?

We have a SAML-based SSO App Extension that uses WKWebView to load the SAML login request. This implementation has been working correctly on iOS versions prior to 26. However, starting with iOS 26, the extension consistently crashes when calling WKWebView.load(_:). The crash occurs inside WebKit, specifically in: /Library/Caches/com.apple.xbs/Sources/WebKit/Source/WebKit/UIProcess/WebsiteData/WebsiteDataStore.cpp at WebKit::WebPageProxy::loadRequest(...) No app-level exception is thrown, and the extension terminates with: Thread 10: EXC_BREAKPOINT (code=1, subcode=0x1a31dbe00) It appears that WKWebView initialization or WebsiteDataStore creation is now restricted in extension contexts on iOS 26, but this change is not documented in the SDK release notes. Could you please confirm if this is an intentional sandbox restriction in iOS 26 or a regression in WebKit? Steps to reproduce: Implement an App Extension using ASAuthorizationProviderExtensionAuthorizationRequest. Create a WKWebView instance in the extension. Attempt to load a SAML login request (POST request with headers). Observe immediate crash on iOS 26 (works fine on earlier versions). Expected behavior: WKWebView should load the request or fail gracefully as in prior releases, without crashing the extension process. Request: Please clarify if WKWebView usage inside extensions is officially unsupported as of iOS 26, and if so, recommend an alternative approach for handling SSO flows.

I’m developing a Safari App Extension and I want to debug the background.js script. However, I can’t find any tool or option to do this. When I run the extension from Xcode using the ProjectName Extension (macOS) scheme, I expect to see a “ProjectName” item under the Develop → Web Extension Background Content menu. But there’s nothing there. Has anyone encountered the same issue? How did you fix it? Environment: Manifest Version: V3 Safari: 26.0.1 (21622.1.22.11.15) Xcode: 26.0.1 (17A400)

The app I work on uses WKWebView to render customer data. In iPadOS 26, we observe that there is a delay when resizing the window (and thus the web view) before the content is re-rendered. The same behavior is visible in Safari. For demonstration purposes, consider this test page: https://phet-dev.colorado.edu/html/build-an-atom/0.0.0-3/simple-text-only-test-page.html Initially, the window is small: Then when the window is expanded, the content scales up temporarily: It eventually re-renders to the correct size, but then if you make the window small again, you get (temporarily): Is there anyway around this behavior? We would love to have the content reflow interactively.

I'm using the new iOS 26 WebPage/WebView for SwiftUI in a NavigationStack. The initial load works as expected, but when loading items from the back/forward lists, the content jumps beneath the navigation bar: struct WebPageTestView: View { var webPage = WebPage() var body: some View { NavigationStack { WebView(webPage) .toolbar { Button("Back") { if let backItem = webPage.backForwardList.backList.last { webPage.load(backItem) } } Button("Forward") { if let forwardItem = webPage.backForwardList.forwardList.first { webPage.load(forwardItem) } } } } .task { webPage.isInspectable = true webPage.load(URL(string: "https://domchristie.co.uk/")) } } } I have run this on the iOS 26.0 and 26.1 Simulators and get the same issue. The demo website does not use any JavaScript. I was able to replicate this behaviour using a wrapped WKWebView and calling the .ignoresSafeArea(.all) modifier.