With Let's Encrypt having completely dropped support for OCSP recently [1], I wanted to ask if macOS has a means of keeping up to date with their CRLs and if so, roughly how often this occurs? I first observed an issue where a revoked-certificate test site, "revoked.badssl.com" (cert signed by Let's Encrypt), was not getting blocked on any browser, when a revocation policy was set up using the SecPolicyCreateRevocation API, in tandem with the kSecRevocationUseAnyAvailableMethod and kSecRevocationPreferCRL flags. After further investigation, I noticed that even on a fresh install of macOS, Safari does not block this test website, while Chrome and Firefox (usually) do, due to its revoked certificate. Chrome and Firefox both have their own means of dealing with CRLs, while I assume Safari uses the system Keychain and APIs. I checked cert info for the site here [2]. It was issued on 2025-07-01 20:00 and revoked an hour later. [1] https://letsencrypt.org/2024/12/05/ending-ocsp/ [2] https://www.ssllabs.com/ssltest/analyze.html?d=revoked.badssl.com

Hello, I'm seeking some clarification regarding the use of accessibility and input monitoring APIs in sandboxed apps that are distributed through the App Store. I understand that accessibility permissions are generally restricted for App Store apps. However, I've seen several recently released apps request these permissions directly upon first launch. I'm aware that apps submitted prior to 2012 may have legacy access to certain APIs, but the ones I'm referring to appear to be recent - within the past year. While it's possible these apps were approved despite the restrictions, I want to make sure I'm not overlooking something. I also came across a recent discussion on this topic, and one post in particular stood out: Link I’d really appreciate some clarification on what's officially allowed. Specifically: Are accessibility permissions ever allowed? If so, under what circumstances? Is input monitoring permitted for apps on the App Store? (The referenced post says yes, but since it's from 2022, I just want to confirm) The linked post suggests that event generation might be allowed on the App Store, though the author hadn’t explored that privilege in detail and recommended opening a DTS tech support incident. I’ve done that and have a support case open - would it be possible to take a closer look at this? For context, my app (currently distributed outside the App Store) uses CGEventPost and CGEventCreateMouseEvent to modify mouse behavior. Thank you

Hi. We're writing Authorization Plugin and started with NullAuthPlugin compilation. When tried to run it on VM (Sonoma 14.6, SIP enabled), we're going into the following issue: `2025-03-08 13:38:20.699503-0800 0xdcb0 Error 0x0 0 0 kernel: (AppleMobileFileIntegrity) [com.apple.MobileFileIntegrity:library_validation_failure] Library Validation failed: Rejecting '/Library/Security/SecurityAgentPlugins/NullAuthPlugin.bundle/Contents/MacOS/NullAuthPlugin' (Team ID: ABCD12EF34, platform: no) for process 'SecurityAgentHel(2094)' (Team ID: N/A, platform: yes), reason: mapping process is a platform binary, but mapped file is not' As I understand, the platform binary is the one signed with Apple signature, which indeed is unavailable for us. How can we avoid this issue and run the plugin? Perhaps we're missing some build setting requirement?

I have 2 basic questions related to Launch Constraints: [Q1] Are Launch Constraints supposed to work when SIP is disabled? From what I'm observing, when SIP is disabled, Launch Constraints (e.g. Launch Constraint Parent Process) are not enforced. I can understand that. But it's a bit confusing considering that the stack diagram in the WWDC 2023 session is placing the 'Environment Constraints' block under SIP, not above. Also the documentation only mentions SIP for the 'is-sip-protected' fact. [Q2] Is the SpawnConstraint key in legacy launchd plist files (i.e. inside /Library/Launch(Agents|Daemons)) officially supported? From what I'm seeing, it seems to be working when SIP is enabled. But the WWDC session and the documentation don't really talk about this case.

We are facing an issue with Keychain sharing across our apps after our Team ID was updated. Below are the steps we have already tried and the current observations: Steps we have performed so far: After our Team ID changed, we opened and re-saved all the provisioning profiles. We created a Keychain Access Group: xxxx.net.soti.mobicontrol (net.soti.mobicontrol is one bundle id of one of the app) and added it to the entitlements of all related apps. We are saving and reading certificates using this access group only. Below is a sample code snippet we are using for the query: [genericPasswordQuery setObject:(id)kSecClassGenericPassword forKey:(id)kSecClass]; [genericPasswordQuery setObject:identifier forKey:(id)kSecAttrGeneric]; [genericPasswordQuery setObject:accessGroup forKey:(id)kSecAttrAccessGroup]; [genericPasswordQuery setObject:(id)kSecMatchLimitOne forKey:(id)kSecMatchLimit]; [genericPasswordQuery setObject:(id)kCFBooleanTrue forKey:(id)kSecReturnAttributes]; Issues we are facing: Keychain items are not being shared consistently across apps. We receive different errors at different times: Sometimes errSecDuplicateItem (-25299), even when there is no item in the Keychain. Sometimes it works in a debug build but fails in Ad Hoc / TestFlight builds. The behavior is inconsistent and unpredictable. Expectation / Clarification Needed from Apple: Are we missing any additional configuration steps after the Team ID update? Is there a known issue with Keychain Access Groups not working correctly in certain build types (Debug vs AdHoc/TestFlight)? Guidance on why we are intermittently getting -25299 and how to properly reset/re-add items in the Keychain. Any additional entitlement / provisioning profile configuration that we should double-check. Request you to please raise a support ticket with Apple Developer Technical Support including the above details, so that we can get guidance on the correct setup and resolve this issue.

Hello everyone, I've noticed some unusual behavior while debugging my application on the iOS 26 beta. My standard testing process relies on the App Tracking Transparency (ATT) authorization status being reset whenever I uninstall and reinstall my app. This is crucial for me to test the permission flow. However, on the current beta, I've observed the following: 1 I installed my app on a device running the iOS 26 beta for the first time. The ATTrackingManager.requestTrackingAuthorization dialog appeared as expected. 2 I completely uninstalled the application. 3 I then reinstalled the app. Unexpected Result: The tracking permission dialog did not appear. And more importantly, the device's advertisingIdentifier appears to have remained unchanged. This is highly unusual, as the IDFA is expected to be reset with a fresh app installation. My question: Is this an intentional change, and is there a fundamental shift in how the operating system handles the persistence of the IDFA or the authorization status? Or could this be a bug in the iOS 26 beta? Any information or confirmation on this behavior would be greatly appreciated.

I am developing a sample authorization plugin to sync the user’s local password to the network password. During the process, I prompt the user to enter both their old and new passwords in custom plugin. After the user enters the information, I use the following code to sync the passwords: try record.changePassword(oldPssword, toPassword: newPassword) However, I have noticed that this is clearing all saved keychain information, such as web passwords and certificates. Is it expected behavior for record.changePassword to clear previously stored keychain data? If so, how can I overcome this issue and ensure the keychain information is preserved while syncing the password? Thank you for your help!

Testing my security agent plugin on Tahoe and find that when unlocking the screen, I now get an extra window that pops up over the SFAuthorizationPluginView that says "macOS You must enter a password to unlock the screen" with a Cancel (enabled) and OK button (disabled). See the attached photo. This is new with Tahoe. When unlocking the screen, I see the standard username and password entry view and I enter my password and click OK. That is when this new view appears. I can only click cancel so there is no way to complete authenticating.

Hi everyone, I'm experiencing an intermittent issue with Keychain data loss on the latest iOS Beta 2. In about 7% of cases, users report that previously saved Keychain items are missing when the app is relaunched — either after a cold start or simply after being killed and reopened. Here are the key observations: The issue occurs sporadically, mostly once per affected user, but in 3 cases it has happened 4 times. No explicit deletion is triggered from the app. No system logs or error messages from Apple indicate any Keychain-related actions. The app attempts to access Keychain items, but they are no longer available. This behavior is inconsistent with previous iOS versions and is not reproducible in development environments. This raises concerns about: Whether this is a bug in the beta or an intentional change in Keychain behavior. Whether this could affect production apps when the final iOS version is released. The lack of any warning or documentation from Apple regarding this behavior. Has anyone else encountered similar issues? Any insights, workarounds, or official clarification would be greatly appreciated. Thanks!

Having trouble decrypting a string using an encryption key and an IV. var key: String var iv: String func decryptData(_ encryptedText: String) -> String? { if let textData = Data(base64Encoded: iv + encryptedText) { do { let sealedBox = try AES.GCM.SealedBox(combined: textData) let key = SymmetricKey(data: key.data(using: .utf8)!) let decryptedData = try AES.GCM.open(sealedBox, using: key) return String(data: decryptedData, encoding: .utf8) } catch { print("Decryption failed: \(error)") return nil } } return nil } Proper coding choices aside (I'm just trying anything at this point,) the main problem is opening the SealedBox. If I go to an online decryption site, I can paste in my encrypted text, the encryption key, and the IV as plain text and I can encrypt and decrypt just fine. But I can't seem to get the right combo in my Swift code. I don't have a "tag" even though I'm using the combined option. How can I make this work when all I will be receiving is the encrypted text, the encryption key, and the IV. (the encryption key is 256 bits) Try an AES site with a key of 32 digits and an IV of 16 digits and text of your choice. Use the encrypted version of the text and then the key and IV in my code and you'll see the problem. I can make the SealedBox but I can't open it to get the decrypted data. So I'm not combining the right things the right way. Anyone notice the problem?

I had the following code in a program that I used to encrypt some important files. I haven't run it in a few years. It used to work, and now it seems the password is mysteriously gone from my Keychain! The return value is now errSecItemNotFound. I'm upset with myself for not backing up the key/password somewhere else. Is there anywhere this could be hiding? Did Apple move it somewhere? I know they created this "Passwords" app in recent years, but I don't see anything in there with the "account" string I used. I run the app from Xcode, so maybe it is in the "container" data somewhere? I do see keychain files under ~/Library. Maybe there is a way to look through old Time Machine backups. Ug. So stressful. Just looking for pointers on where the data might be, and why it might have disappeared. Unfortunately it was not a "guessable" password, it was a generated 256 bit key, base64 encoded. Perhaps I could crack that with brute force if I'm determined enough... public static func queryGenericPasswordAsString(account: String) throws -> String { let query: [String: Any] = [kSecClass as String: kSecClassGenericPassword, kSecMatchLimit as String: kSecMatchLimitOne, kSecAttrAccount as String: account, kSecReturnAttributes as String: true, kSecReturnData as String: true] var item: CFTypeRef? let status = SecItemCopyMatching(query as CFDictionary, &item) guard status != errSecItemNotFound else { throw KeychainError.noPassword } ... }

I am developing an Authorisation Plugin which talks to Launch daemons over XPC. Above is working neat, now I have to decide on how to get it installed on a machine. Installation requires. Plugin Installation Launch Daemon Installation Both require Moving binary and text (.plist) file into privileged system managed directory. Firing install/load commands as root (sudo). I have referred this post BSD Privilege Escalation on macOS, but I am still not clear how to approach this. Q: My requirement is: I can use .pkg builder and install via script, however I have some initialisation task that needs to be performed. User will enter some details talk to a remote server and get some keys, all goes well restarts the system and my authorisation plugin will welcome him and get him started. If I cannot perform initialisation I will have to do it post restart on login screen which I want to avoid if possible. I tried unconventional way of using AppleScript from a SwiftUI application to run privileged commands, I am fine if it prompts for admin credentials, but it did not work. I don't want that I do something and when approving it from Apple it gets rejected. Basically, how can I provide some GUI to do initialisation during installation or may be an app which helps in this. Q: Please also guide if I am doing elevated actions, how will it affect app distribution mechanism. In Read Me for EvenBetterAuthorizationSample I read it does. Thanks.

Hi, It may be a stupid question, but we really wonder if there is a way for MDM to push a unique mTLS cert to our iOS application or if it can populate a client certificate in the iOS where our application can access it. Like browser app, how do browser mTLS certs get pushed? Thanks, Ying

We are interested in using a hardware-bound key in a launch daemon. In a previous post, Quinn explicitly told me this is not possible to use an SE keypair outside of the system context and my reading of the Apple documentation also supports that. That said, we have gotten the following key-creation and persistence flow to work, so we have some questions as to how this fits in with the above. (1) In a launch daemon (running thus as root), we do: let key = SecureEnclave.P256.Signing.PrivateKey() (2) We then use key.dataRepresentation to store a reference to the key in the system keychain as a kSecClassGenericPassword. (3) When we want to use the key, we fetch the data representation from system keychain and we "rehydrate" the key using: SecureEnclave.P256.Signing.PrivateKey(dataRepresentation: data) (4) We then use the output of the above to sign whatever we want. My questions: in the above flow, are we actually getting a hardware-bound key from the Secure Enclave or is this working because it's actually defaulting to a non-hardware-backed key? if it is an SE key, is it that the Apple documentation stating that you can only use the SE with the Data Protection Keychain in the user context is outdated (or wrong)? does the above work, but is not an approach sanctioned by Apple? Any feedback on this would be greatly appreciated.

Quinn, you've often suggested that to validate the other side of an XPC connection, we should use the audit token. But that's not available from the XPC object, whereas the PID is. So everyone uses the PID. While looking for something completely unrelated, I found this in the SecCode.h file OSStatus SecCodeCreateWithXPCMessage(xpc_object_t message, SecCSFlags flags, SecCodeRef * __nonnull CF_RETURNS_RETAINED target); Would this be the preferred way to do this now? At least from 11.0 and up. Like I said, I was looking for something completely unrelated and found this and don't have the cycles right now to try it. But it looks promising from the description and I wanted to check in with you about it in case you can say yes or no before I get a chance to test it. Thanks

Hello, We recently implemented SSL pinning in our iOS app (Objective-C) using the common approach of embedding the server certificate (.cer) in the app bundle and comparing it in URLSession:didReceiveChallenge:. This worked fine initially, but when our backend team updated the server certificate (same domain, new cert from CA), the app immediately started failing because the bundled certificate no longer matched. We’d like to avoid shipping and updating our app every time the server’s certificate changes. Instead, we are looking for the Apple-recommended / correct approach to implement SSL pinning without embedding the actual certificate file in the app bundle. Specifically: . Is there a supported way to implement pinning based on the public key hash or SPKI hash (like sha256/... pins) rather than the full certificate? . How can this be safely implemented using NSURLSession / SecTrustEvaluate (iOS 15+ APIs, considering that SecTrustGetCertificateAtIndex is deprecated)? . Are there Apple-endorsed best practices for handling certificate rotation while still maintaining strong pinning? Any guidance or code samples would be greatly appreciated. We want to make sure we are following best practices and not relying on brittle implementations. Thanks in advance!

We’ve noticed an unexpected behavior in our production iOS app where the UIDevice.current.identifierForVendor value occasionally changes, even though: The app is distributed via the App Store (not TestFlight or Xcode builds) We do not switch provisioning profiles or developer accounts No App Clips, App Thinning, or other advanced features are in use There’s no manual reinstall or device reset in the scenarios observed (as per user feedback) Any insights or confirmations would be much appreciated. Thanks!

Hello, I am currently working on iOS application development using Swift, targeting iOS 17 and above, and need to implement mTLS for network connections. In the registration API flow, the app generates a private key and CSR on the device, sends the CSR to the server (via the registration API), and receives back the signed client certificate (CRT) along with the intermediate/CA certificate. These certificates are then imported on the device. The challenge I am facing is pairing the received CRT with the previously generated private key in order to create a SecIdentity. Could you please suggest the correct approach to generate a SecIdentity in this scenario? If there are any sample code snippets, WWDC videos, or documentation references available, I would greatly appreciate it if you could share them. Thank you for your guidance.

Hello Experts, I am in need of your help with this feedback from the App Reviewer. Issue Description: One or more purpose strings in the app do not sufficiently explain the use of protected resources. Purpose strings must clearly and completely describe the app's use of data and, in most cases, provide an example of how the data will be used. Next Steps: Update the location purpose string to explain how the app will use the requested information and provide a specific example of how the data will be used. See the attached screenshot. Resources: Purpose strings must clearly describe how an app uses the ability, data, or resource. The following are hypothetical examples of unclear purpose strings that would not pass review: "App would like to access your Contacts" "App needs microphone access" Feedback #2 "Regarding 5.1.1, we understand why your app needs access to location. However, the permission request alert does not sufficiently explain this to your users before accessing the location. To resolve this issue, it would be appropriate to revise the location permission request, specify why your app needs access, and provide an example of how your app will use the user's data. To learn more about purpose string requirements, watch a video from App Review with tips for writing clear purpose strings. We look forward to reviewing your app once the appropriate changes have been made." May I know how can I update my purpose string? I appealed on the first feedback by explaining what is the purpose of it but got the Feedback #2. TYIA!!

Has anybody else experienced something similar? This is on the login screen. I call update() and it doesn't call me back with view() 2025-08-21 17:04:38.669 Db SecurityAgentHelper-arm64[1134:2df1] [***:LoginView] calling update() Then silence...