I'm working on integrating Passkey functionality into my iOS app (targeting iOS 16.0+), and I'm facing an issue where the system dialog still shows the "Save to another device" option during Passkey registration. I want to hide this option to force users to create Passkeys only on the current device. 1. My Current Registration Implementation Here’s the code I’m using to create a Passkey registration request. I’ve tried to use ASAuthorizationPlatformPublicKeyCredentialProvider (which is supposed to target platform authenticators like Face ID/Touch ID), but the "Save to another device" option still appears: `// Initialize provider for platform authenticators let provider = ASAuthorizationPlatformPublicKeyCredentialProvider(relyingPartyIdentifier: domain) // Create registration request let registrationRequest = provider.createCredentialRegistrationRequest( challenge: challenge, name: username, userID: userId ) // Optional configurations (tried these but no effect on "another device" option) registrationRequest.displayName = "Test Device" registrationRequest.userVerificationPreference = .required registrationRequest.attestationPreference = .none // Set up authorization controller let authController = ASAuthorizationController(authorizationRequests: [registrationRequest]) let delegate = PasskeyRegistrationDelegate(completion: completion) authController.delegate = delegate // Trigger the registration flow authController.performRequests(options: .preferImmediatelyAvailableCredentials)` 2. Observation from Authentication Flow (Working as Expected) During the Passkey authentication flow (not registration), I can successfully hide the "Use another device" option by specifying allowedCredentials in the ASAuthorizationPlatformPublicKeyCredentialAssertionRequest. Here’s a simplified example of that working code: let assertionRequest = provider.createCredentialAssertionRequest(challenge: challenge) assertionRequest.allowedCredentials = allowedCredentials After adding allowedCredentials, the system dialog no longer shows cross-device options—this is exactly the behavior I want for registration. 3. My Questions Is there a similar parameter to allowedCredentials (from authentication) that I can use during registration to hide the "Save to another device" option? Did I miss any configuration in the registration request (e.g., authenticatorAttachment or other properties) that forces the flow to use only the current device’s platform authenticator? Are there any system-level constraints or WebAuthn standards I’m overlooking that cause the "Save to another device" option to persist during registration? Any insights or code examples would be greatly appreciated!

Since Sun 15th Jun 04:30 (UTC+7) we received lots of following error that causes our device test failure. Could Apple please investigate further? ############################# Operations could not be completed. (com.apple.devicecheck.error error 4.) (serverUnavailable)

I've made my first app and encountered an unexpected (potentially existential) issue. The Manager app is designed to tag 3rd party "plugins" used by a DAW, storing metadata in a local SQLite database, and move them between Active and Inactive folders. This allows management of the plugin collection - the DAW only uses what's in the Active folder. Permissions are obtained via security-scoped bookmarks on first launch. The app functions as intended: plugin bundles move correctly and the database tracks everything. No information is written to the plugins themselves. The Problem:
When moving plugins using fs.rename() , the MAS sandbox automatically adds the com.apple.quarantine extended attribute to moved files. When the DAW subsequently rebuilds its plugin cache, it interprets quarantined plugins as "corrupt" or potentially malicious and refuses to load them. Technical Details: Moving files with NSFileManager or Node.js fs APIs within sandbox triggers quarantine Sandboxed apps cannot call xattr -d com.apple.quarantine or use removexattr() The entitlement com.apple.security.files.user-selected.read-write doesn't grant xattr removal rights User workaround: run xattr -cr /path/to/plugins in Terminal - not acceptable for professional users Question:
Is there any MAS-compliant way to move files without triggering quarantine, or to remove the quarantine attribute within the sandbox? The hardened-runtime DMG build works perfectly (no sandbox = no quarantine added). Any insight appreciated!

I'm developing a passkey manager using ASCredentialProviderViewController. I've set a custom AAGUID in the attestation object during registration: let aaguid = Data([ 0xec, 0x78, 0xfa, 0xe8, 0xb2, 0xe0, 0x56, 0x97, 0x8e, 0x94, 0x7c, 0x77, 0x28, 0xc3, 0x95, 0x00 ]) However, when I test on webauthn.io, the relying party receives: AAGUID: 00000000-0000-0000-0000-000000000000 Provider Name: "iCloud Keychain" It appears that macOS overwrites the AAGUID to all zeros for third-party Credential Provider Extensions. This makes it impossible for relying parties to distinguish between different passkey providers, which is one of the key purposes of AAGUID in the WebAuthn specification. Is this expected behavior? Is there a way for third-party Credential Provider Extensions to use their own registered AAGUID? Environment: macOS 26.2 Xcode 26.2

Hello, Thanks for the new video on Memory Integrity Enforcement! Is the presented app's sample code available (so that we can play with it and find & fix the bug on our own, using Soft Mode)? Thanks in advance!

Hi, This issue is happening during Passkey creation. We’ve observed that approximately 1% of our customer users encounter a persistent error during Passkey creation. For the vast majority, the process works as expected. We believe our apple-app-site-association file is correctly configured, served directly from the RP ID over HTTPS without redirects, and is up-to-date. This setup appears to work for most users, and it seems the Apple CDN cache reflects the latest version of the file. To help us diagnose and address the issue for the affected users, we would appreciate guidance on the following: What tools or steps does Apple recommend to identify the root cause of this issue? Are there any known recovery steps we can suggest to users to resolve this on affected devices? Is there a way to force a refresh of the on-device cache for the apple-app-site-association file? Thank you in advance for any input or guidance.

Why can’t sandboxed mac app store apps have full disk access available in the system settings for full disk access? I discovered mac app store apps in release mode cannot access the ai auggie command line program and other command line programs like opengrep on your system. Debug builds fine. I came up with a workaround: Since I have an ssh client built in for connecting to remote servers, why not connect to ssh on the same local machine… Ask the user for their username and password in a popup. To do this, you have to enable remote login on your mac in system settings -> sharing. In addition you must grant full disk access to cli ssh in system settings: add /usr/libexec/sshd-keygen-wrapper It all works, but I don’t see the cli program in mac settings. To remove the cli program you must run a command line program to remove all full disk access support from all apps. No way to just undo ssh. So my question is, even though I got CodeFrog all working for a mac app store release, should I not do it because it’s insecure or too complicated with the system settings? Should I instead sell the app off the store like Panic Nova? Need some advice. I have not implemented in app purchases yet. Should I just have a reality check and sell the app off the store, or try for app store approval? Bummer… Maybe I’m ahead of my time, but perhaps Apple could review the source code for apps requesting full disk access and make sure there’s nothing fraudulent in them. Then, developer tools app store apps could be in the store with the user’s assurance that nothing is happening behind the scenes that is scary. From: https://blog.greenrobot.com/2025/11/10/i-have-a-decision-to-make/ Related post: https://developer.apple.com/forums/thread/806187 I submitted a code level tech support question for this. They directed me here.

Our background monitoring application uses a Unix executable that requests Screen Recording permission via CGRequestScreenCaptureAccess(). This worked correctly in macOS Tahoe 26.0.1, but broke in 26.1. Issue: After calling CGRequestScreenCaptureAccess() in macOS Tahoe 26.1: System dialog appears and opens System Settings Our executable does NOT appear in the Screen Recording list Manually adding via "+" button grants permission internally, but the executable still doesn't show in the UI Users cannot verify or revoke permissions Background: Unix executable runs as a background process (not from Terminal) Uses Accessibility APIs to retrieve window titles Same issue occurs with Full Disk Access permissions Environment: macOS Tahoe 26.1 (worked in 26.0.1) Background process (not launched from Terminal) Questions: Is this a bug or intentional design change in 26.1? What's the recommended approach for background executables to properly register with TCC? Are there specific requirements (Info.plist, etc.) needed? This significantly impacts user experience as they cannot manage permissions through the UI. Any guidance would be greatly appreciated. Thank you

Hi. I enter a password using the security command at the command line. It appears in the keychain access app, but not in the passwords app. I don't understand why. rickhedin@Ricks-MacBook-Pro zalando % security add-generic-password -U -s "birds" -a "cats" -w "dogs" rickhedin@Ricks-MacBook-Pro zalando % rickhedin@Ricks-MacBook-Pro zalando % security find-generic-password -s "birds" -wa "cats" dogs rickhedin@Ricks-MacBook-Pro zalando % I'm told the two apps are two views of the same data, so I guess some filter must be being applied?

Hello, I am using the prf extension for passkeys that is available since ios 18 and macos15. I am using a fixed, hardcoded prf input when creating or geting the credentials. After creating a passkey, i try to get the credentials and retrieve the prf output, which works great, but i am getting different prf outputs for the same credential and same prf input used in the following scenarios: Logging in directly (platform authenticator) on my macbook/iphone/ipad i get "prf output X" consistently for the 3 devices When i use my iphone/ipad to scan the qr code on my macbook (cross-platform authenticator) i get "prf output Y" consistently with both my ipad and iphone. Is this intended? Is there a way to get deterministic prf output for both platform and cross-platform auth attachements while using the same credential and prf input?

Hi Apple Developer Support, I’m building a macOS app that acts as a default browser. I can confirm that I can set it correctly through System Settings → Default Web Browser. The app implements ASWebAuthenticationSessionWebBrowserSessionHandling to intercept Single Sign-On (SSO) flows. To handle requests, it presents SSO pages in a WKWebView embedded in a window that this app creates and owns - this works perfectly for the initial login flow. However, after I close my WebView window and then launch Safari or Chrome, any subsequent SSO requests open in the newly-launched browser instead of my custom browser, even though it remains selected as the default in System Settings. I’d appreciate any insight on why the system “hands off” to Safari/Chrome in this scenario, and how I can keep my app consistently intercepting all ASWebAuthenticationSession requests. Here are the steps that break down the issue: Launch & confirm that the custom default browser app is the default browser in System Settings → Default Web Browser. Trigger SSO (e.g., try to log in to Slack). App’s WKWebView appears, and the SSO UI works end-to-end. Close the WebView window (I have windowShouldClose callback where I cancel the pending session). Manually launch Safari or Chrome. Trigger SSO again. Observed behaviour: the login URL opens in Safari/Chrome. I am using macOS 15.3.2

Title: Sporadical - Permissions Not Cleared After App Uninstallation on iOS18 I install and launch my private MAUI App I ask for example Bluetooth permissions (can be any other permission) I tap Allow button on native settings (or Don't Allow) I unistall app from real phone (we can wait for a while) I install and launch My Private MAUI App I ask for example Bluetooth permissions <- here is an issue. Bluetooth is already granted, so I cannot ask for it again. Occurrence: This issue occurs inconsistently: On iOS 18.5: approximately 5 out of 10 times On iOS 17: approximately 1 out of 50 times Tested using my automated system using Appium latest. After each scenario I unistall app using: "mobile: removeApp" with bundleId

Hello, I'm an application developer related to Apple system extensions. I developed an endpoint security system extension that can run normally before the 14.x system. However, after I upgraded to 15.x, I found that when I uninstalled and reinstalled my system extension, although the system extension was installed successfully, a system warning box would pop up when I clicked enable in the Settings, indicating a failure. I conducted the following test. I reinstalled a brand-new MAC 15.x system. When I installed my applications, the system extensions could be installed successfully and enabled normally. However, when I uninstalled and reinstalled, my system extension couldn't be enabled properly and a system warning popped up as well. I tried disabling SIP and enabling System Extension Developers, but it still didn't work. When the system warning box pops up, I can see some error log information through the console application, including an error related to Failed to authorize right 'com.apple.system-extensions.admin' by client '/System/Library/ExtensionKit/Extensions/SettingsSystemExtensionController.appex' [2256] for authorization created by '/System/Library/ExtensionKit/Extensions/SettingsSystemExtensionController.appex' [2256] (3,0) (-60005) (engine 179) as shown in the screenshot. The same problem, mentioned in Cannot approve some extensions in MacOS Sequoia , but there is no solution

The Passwords App is accessing websites found in the ASCredentialIdentityStore associated with a 3rd Party password management app (SamuraiSafe). This behaviour appears to be associated with looking up website favicons in order to display in Passwords. However the websites contacted are not stored in the Passwords App/iCloud KeyChain - only the 3rd Party password management app (SamuraiSafe). This is effectively leaking website information stored in the 3rd Party password management app. I first noticed this behaviour on macOS, and it appears to happen every 8 days. Today it was seen on iOS. The behaviour is revealed through the App Privacy Report on iOS (and LittleSnitch on macOS). I would not be surprised to see the Passwords App do this for websites saved in the Passwords App/iCloud KeyChain, however I believe it should not be arbitrarily testing every website found in the ASCredentialIdentityStore as reference to that website url should be entirely under the control of the end user. See attached screenshots from App Privacy Report. Filed bug with Apple: FB16682423

I noticed, that even though my AutoFill Credential Provider Extension works with Safari for both Passwords and Passkeys, it doesn't work in context menus inside arbitrary textfields, meanwhile the same is true for the Apple Passwords app. This is a great hit to AutoFill productivity, as my extension is unable to fill textfields by just going to the context menu and clicking AutoFill > Passwords.. Is this a feature only available to Apple via private APIs, or is this something I can interface with? I checked and the Passwords app does use some undocumented but non-private entitlements: [Key] com.apple.authentication-services.access-credential-identities [Value] [Bool] true I also checked the responsible executable for some hints (AutoFillPanelService) however found nothing that would lead me to believe this is a public extension point. Another idea I had was trying to use a macOS Service for this, however Services in the "General" category won't show up in any context menu, only in the Application's Main Menu.

Hello, we're currently evaluating the side effects of transferring our app to a different Apple developer account. Our users use SIWA to sign in to our platform which uses Auth0. As I understand it, the identifiers provided by Apple will change, and as such Auth0 will not recognise them and treat them as new users. I've read conflicting documentation, reports, discussions, etc, so it would be great if I could get some clarification on the topic. Furthermore we're concerned about the Hide My Email functionality. A lot of our users use this feature. Will the relay email for each user change with the transfer? If so, does the 'old' relay email stop working as soon as the transfer happens? Thanks in advance!

we can get token but when send to verity from apple. it reture Error : {"responseCode":"400","responseMessage":"Missing or incorrectly formatted device token payload"}

Binary code is associated with the NSUserTrackingUsageDescription deleted at present, but in the revised App privacy will contain NSUserTrackingUsageDescription, I feel very confused, don't know should shouldn't solve.

Context We are experiencing inconsistent behaviour with "Sign in with Apple" across different environments (we have an app for "A" and "B" regions) on our web client in browsers. Specifically, we have observed two key issues: Missing email and email_verified Claims in ID Token In some cases, the ID token received after successful authentication does not contain the email and email_verified claims. Here the docs state that "Alternatively, if the managed Apple ID is in Apple School Manager, the email claim may be empty. Students, for example, often don’t have an email that the school issues.", but this was experienced with a non-student Apple ID. This issue was observed for certain users in the "A" environment, while the same users had no issues in the "B" environment. For one affected user, removing and re-enabling the "Sign in with Apple" integration resolved the issue (https://account.apple.com/account/manage/section/security). However, for another user, the integration could not be removed, preventing this workaround (button was active, but did nothing). In contrast, for some users, authentication works correctly in both environments without missing claims. Inconsistent Display of App Icon and App Name The app icon and app name do not always appear on the Apple login interface. One user observed that the app icon and name were displayed in "A" but not in "B". Another user had the opposite experience, with the app icon and name appearing in "B" but not in "A". A third user did not see the app icon or name in either environment. Questions Why does the app icon and name not always appear on the "Sign in with Apple" login screen? How is it possible that the ID token sometimes lacks email and email_verified claims when using the same Apple ID in different environments?

Hello Team, We’ve recently started receiving reports from our customer base (Trellix) regarding issues with Full Disk Access (FDA) for Trellix binaries on macOS devices running Tahoe 26.1 (released on November 3, 2025). The issue occurs when users attempt to add Trellix CLI binaries under FDA to grant the required permissions; the binaries fail to appear under the FDA settings, even after selection. Upon further investigation, this appears to be a macOS 26.1–specific issue and not observed in earlier versions. Similar reports have been noted across various forums, indicating that the issue affects multiple binaries, not just Trellix: Some of the discussions on the same issue I see online. https://developer.apple.com/forums/thread/806187 https://developer.apple.com/forums/thread/806156 https://forum.logik.tv/t/macos-26-1-installation-issue-wait-before-updating/13761 https://www.reddit.com/r/MacOS/comments/1os1ph3/cant_add_anything_to_privacy_security_full_disk/ I have also logged FB21009024 for the same. We would like to understand when we can expect this to be fixed, since the issue persists even in 26.2 Beta and also whether the workaround of dragging and dropping the binaries can still be suggested?