I created a virtual audio device to capture system audio with a sample rate of 44.1 kHz. After capturing the audio, I forward it to the hardware sound card using AVAudioEngine, also with a sample rate of 44.1 kHz. However, due to the clock sources being unsynchronized, problems occur after a period of playback. How can I retrieve the clock source of the hardware device and set it for the virtual device?

I found some documentation about Kext, but I heard they have now moved to Dext. So I was wondering if Dext could completely imitate the previous Kext. https://developer.apple.com/documentation/kernel/implementing_drivers_system_extensions_and_kexts This page is written like this Important In macOS 11 and later, the kernel doesn’t load a kext if an equivalent DriverKit solution exists. You may continue to use kexts in macOS 10.15 and earlier.

I'm developing a video capture app using AVFoundation, designed specifically for use on a boat pylon to record slalom water skiing. This setup involves considerable vibration. As you may know, the OIS that Apple began adding to lenses since the iPhone 7 is actually very problematic in high vibration circumstances, ironically creating very shaky video, whereas lenses without OIS produce perfectly stable video. Because of this, up until iPhone 14, the solution for my app was simply to use the Selfie lens, which did not have OIS. Starting with iPhone 14 through iPhone 16 (non-Pro models), technical specs suggest the selfie lens still does not include OIS. However, I’m still seeing the same kind of shaky video behavior I see on OIS-equipped lenses. The one hardware change I see in this camera module is the addition of PDAF (Phase Detection Autofocus), so that is my best guess as to what is causing the unstable video. 1- Does that make any sense - that in high vibration settings, PDAF could create unstable video in the same way that OIS does? Or could it be something else that was changed between the iPhone 13 and 14 Selfie lens? Thinking that the issue was PDAF, I figured that if I enabled my app to set a Manual Focus level, that ought to circumvent PDAF (expecting that if a lens is manually focusing, it can’t also be autofocusing via PDAF). However, even with manual focus locked via AVCaptureDevice in my app, on the Selfie lens of an iPhone 16, the video still comes out very shaky, basically unusable. I also tested with the built-in Apple Camera app (using the press-and-hold to lock focus and exposure) and another 3rd party camera app to lock focus, all with the same results, so it's not that my app just isn't correctly doing manual focus. So I'm stuck with these questions: 2- Does the selfie camera on iPhones 14–16 use PDAF even when focus is set to locked/manual mode? 3- Is there any way in AVFoundation to disable or suppress PDAF during video recording (e.g., a flag, device format setting, or private API)? 4- Is PDAF behavior or suppression documented or controllable via AVCaptureDevice or any related class? 5- If no control of PDAF is available, are there any best practices for stabilizing or smoothing this effect programmatically? Note that I also have set my app to use the most aggressive form of stabilization available, so it defaults to .cinematicExtendedEnhanced, if that’s not available, then .cinematicExtended, etc. On the 16 Selfie lens, it is using .cinematicExtended. As an additional question: 6- Would those be the most appropriate stabilization settings for a high vibration environment, and if not, what would be best?

I’m developing a hybrid app (WebView / Turbo Native) that uses getUserMedia to access the back camera for a PPG/heart rate measurement feature (the user places their finger on the camera). Problem: Even when I specify constraints like: { video: { deviceId: '...', facingMode: { exact: 'environment' }, advanced: [{ zoom: 1.0 }] }, audio: false } On iPhone 15 (iOS 18), iOS unexpectedly switches between the wide, ultra-wide, and telephoto lenses during the measurement. This breaks the heart rate detection, and it forces the user to move their finger in the middle of the measurement. Question: Is there any way, via getUserMedia/WebRTC, to force iOS to use only the wide-angle lens and prevent automatic lens switching? I know that with AVFoundation (Swift) you can pick .builtInWideAngleCamera, but I’m hoping to avoid building a custom native layer and would prefer to stick with WebView/JavaScript if possible to save time and complexity. Any suggestions, workarounds, or updates from Apple would be greatly appreciated! Thanks a lot!

Environment→ ・Device: iPad 10th generation ・OS：**iOS18.3.2 We're using AVAudioPlayer to play a sound when a button is tapped. In our use case, this button can be tapped very frequently — roughly every 0.1 to 0.2 seconds. Each tap triggers the following function: var audioPlayer: AVAudioPlayer? func soundPlay(resource: String, type: String){ guard let path = Bundle.main.path(forResource: resource, ofType: type) else { return } do { audioPlayer = try AVAudioPlayer(contentsOf: URL(fileURLWithPath: path)) audioPlayer!.delegate = self try audioSession.setCategory(.playback) } catch { return } self.audioPlayer!.play() } The issue is that under high-frequency tapping (especially around 0.1–0.15s intervals), the app occasionally crashes. The crash does not occur every time, but it happens randomly — sometimes within 30 seconds, within 1 minute, or even 3 minutes of continuous tapping. Interestingly, adding a delay of 0.2 seconds between button taps seems to prevent the crash entirely. Delays shorter than 0.2 seconds (e.g.,0.15s,0.18s) still result in occasional crashes. My questions are: **Is this expected behavior from AVAudioPlayer or AVAudioSession? Could this be a known issue or a limitation in AVFoundation? Is there any documentation or guidance on handling frequent sound playback safely?** Any insights or recommendations on how to handle rapid, repeated audio playback more reliably would be appreciated.

I use the Apple Music API to poll my listening history at regular intervals. Every morning between 5:30AM and 7:30AM, I observe a strange pattern in the API responses. During this window, one or more of the regular polling intervals returns a response that differs significantly from the prior history response, even though I had no listening activity at that time. I'm using this endpoint: https://api.music.apple.com/v1/me/recent/played/tracks?types=songs,library-songs&include[library-songs]=catalog&include[songs]=albums,artists Here’s a concrete example from this morning: Time: 5:45AM Fetch 1 Tracks (subset): 1799261990, 1739657416, 1786317143, 1784288789, 1743250261, 1738681804, 1789325498, 1743036755, ... Time: 5:50AM Fetch 2 Tracks (subset): 1799261990, 1739657416, 1786317143, 1623924746, 1635185172, 1574004238, 1198763630, 1621299055, ... Time: 5:55AM Fetch 3 Tracks (subset): 1799261990, 1739657416, 1786317143, 1784288789, 1743250261, 1738681804, 1789325498, 1743036755, ... At 5:50, a materially different history is returned, then it returns back to the prior history at the next poll. I've listened to all of the tracks in each set, but the 5:50 history drops some tracks and returns some from further back in history. I've connected other accounts and the behavior is consistent and repeatable every day across them. It appears the API is temporarily returning a different (possibly outdated or cached?) view of the user's history during that early morning window. Has anyone seen this behavior before? Is this a known issue with the Apple Music API or MusicKit backend? I'd love any insights into what might cause this, or recommendations on how to work around it.

Environment→ ・Device: iPad 10th generation ・OS：**iOS18.3.2 I'm using AVAudioSession to record sound in my application. But I recently came to realize that when the app starts a recording session on a tablet, OS automatically sets the tablet volume to 50% and when after recording ends, it doesn't change back to the previous volume level before starting the recording. So I would like to know whether this is an OS default behavior or a bug? If it's a default behavior, I much appreciate if I can get a link to the documentation.

Hi guys, I am having issue in live-streaming audio from Bluetooth headset and playing it live on the iPhone speaker. I am able to redirect audio back to the headset but this is not what I want. The issue happens when I am trying to override output - the iPhone switches to speaker but also switches a microphone. This is example of the code: import AVFoundation class AudioRecorder { let player: AVAudioPlayerNode let engine:AVAudioEngine let audioSession:AVAudioSession let audioSessionOutput:AVAudioSession init() { self.player = AVAudioPlayerNode() self.engine = AVAudioEngine() self.audioSession = AVAudioSession.sharedInstance() self.audioSessionOutput = AVAudioSession() do { try self.audioSession.setCategory(AVAudioSession.Category.playAndRecord, options: [.defaultToSpeaker]) try self.audioSessionOutput.setCategory(AVAudioSession.Category.playAndRecord, options: [.allowBluetooth]) // enables Bluetooth HFP profile try self.audioSession.setMode(AVAudioSession.Mode.default) try self.audioSession.setActive(true) // try self.audioSession.overrideOutputAudioPort(.speaker) // doens't work } catch { print(error) } let input = self.engine.inputNode self.engine.attach(self.player) let bus = 0 let inputFormat = input.inputFormat(forBus: bus) self.engine.connect(self.player, to: engine.mainMixerNode, format: inputFormat) input.installTap(onBus: bus, bufferSize: 512, format: inputFormat) { (buffer, time) -> Void in self.player.scheduleBuffer(buffer) print(buffer) } } public func start() { try! self.engine.start() self.player.play() } public func stop() { self.player.stop() self.engine.stop() } } I am not sure if this is a bug or not. Can somebody point me into the right direction? I there a way to design a custom audio routing? I would also appreciate some good documentation besides AVFoundation docs.

In our logging tools (Firebase) I see a lot of errors reported when users are playing content and the app transitions to the background. A AVPlayerItemFailedToPlayToEndTime notification is fired with an error containing error codes like -1102 and 1852797029 which seem to correspond to NSURLErrorNoPermissionsToReadFile and kCMIOHardwareIllegalOperationError respectively. To me, it looks like these might have something to do with caching logic. The items being played are HLS streams and we make use of AVAssetDownloadTask to make any streamed content offline available. Our setup is similar to the sample provided here: https://developer.apple.com/documentation/avfoundation/using-avfoundation-to-play-and-persist-http-live-streams. Whenever an item is selected for playback the app will check if a cached version is available and if so gets the url to the stored file like the "localAssetForStream()" method in the example, or get the asset from a currently running AVAssetDownloadTask for the item, or else, starts a new AVAssetDownloadTask and returns a AVAsset from that task to play. This seems to work fine, and I can't reproduce the issues our users and our logging tools are reporting. Is there some case I am missing where AVAssetDownloadTask and associated AVAssets might become unreadable when the app transitions to the background? Or do these errors indicate a different problem entirely?

I'm using AVFoundation to make a multi-track editor app, which can insert multiple track and clip, including scale some clip to change the speed of the clip, (also I'm not sure whether AVFoundation the best choice for me) but after making the scale with scaleTimeRange API, there is some short noise sound in play back. Also, sometimes it's fine when play AVMutableCompostion using AVPlayer with AVPlayerItem, but after exporting with AVAssetReader, will catch some short noise sounds in result file.... Not sure why. Here is the example project, which can build and run directly. https://github.com/luckysmg/daily_images/raw/refs/heads/main/TestDemo.zip

Hi, I have a problem when I want to attach my grayscale depth map image into the real image. The produced depth map doesn't have the cameraCalibration value which should responsible to align the depth data to the image. How do I align the depth map? I saw an article about it but it is not really detailed so I might be missing some process. I tried to: convert my depth map into pixel buffer create image destination ref and add the image there. add the auxData (depth map dict) This is the output: There is some black space there and my RGB image colour changes

Hello. My app uses AVAudioRecorder to generate recording files, which are consistently only 4kb in size. Most users generate audio files normally, with only a few users experiencing this phenomenon occasionally. After uninstalling and installing the app, it will work normally, but it will reappear after a period of time. I have compared that the problematic audio files generated each time are fixed and cannot be played. Added the audioRecorderDidFinishRecording proxy method, which shows that the recording was completed normally. The user also reported that the recording is normal, but there is a problem with the generated file. How should I handle this issue? Look forward to your reply. - (void)startRecordWithOrderID:(NSString *)orderID { AVAudioSession *audioSession = [AVAudioSession sharedInstance]; [audioSession setCategory:AVAudioSessionCategoryRecord error:nil]; [audioSession setActive:YES error:nil]; NSMutableDictionary *settings = [[NSMutableDictionary alloc] init]; [settings setObject:[NSNumber numberWithFloat: 8000.0] forKey:AVSampleRateKey]; [settings setObject:[NSNumber numberWithInt: kAudioFormatLinearPCM] forKey:AVFormatIDKey]; [settings setObject:[NSNumber numberWithInt:16] forKey:AVLinearPCMBitDepthKey]; [settings setObject:[NSNumber numberWithInt: 1] forKey:AVNumberOfChannelsKey]; [settings setObject:[NSNumber numberWithBool:NO] forKey:AVLinearPCMIsBigEndianKey]; [settings setObject:[NSNumber numberWithBool:NO] forKey:AVLinearPCMIsFloatKey]; NSString *path = [WDUtility createDirInDocument:@"audios" withOrderID:orderID withPathExtension:@"wav"]; NSURL *tmpFile = [NSURL fileURLWithPath:path]; recorder = [[AVAudioRecorder alloc] initWithURL:tmpFile settings:settings error:nil]; [recorder setDelegate:self]; [recorder prepareToRecord]; [recorder record]; }

Hello everyone, I am working on an app that allows you to review your own music using Apple Music. Currently I am running into an issue with the skipping forwards and backwards outside of the app. How it should work: When skipping forward or backwards on the lock or home screen of an iPhone, the next or previous song on an album should play and the information should change to reflect that in the app. If you play a song in Apple Music, you can see a Now Playing view in the lock screen. When you skip forward or backwards, it will do either action and it would reflect that when you see a little frequency icon on artwork image of a song. What it's doing: When skipping forward or backwards on the lock or home screen of an iPhone, the next or previous song is reflected outside of the app, but not in the app. When skipping a song outside of the app, it works correctly to head to the next song. But when I return to the app, it is not reflected NOTE: I am not using MusicKit variables such as Track, Album to display the songs. Since I want to grab the songs and review them I need a rating so I created my own that grabs the MusicItemID, name, artist(s), etc. NOTE: I am using ApplicationMusicPlayer.shared Is there a way to get the song to reflect in my app? (If its easier, a simple example of it would be nice. No need to create an entire xprod file)

Use case: When SharePlay -ing a fully immersive 3D scene (e.g. a virtual stage), I would like to shine lights on specific Personas, so they show up brighter when someone in the scene is recording the feed (think a camera person in the scene wearing Vision Pro). Note: This spotlight effect only needs to render in the camera person's headset and does NOT need to be journaled or shared. Before I dive into this, my technical question: Can environmental and/or scene lighting affect Persona brightness in a SharePlay? If not, is there a way to programmatically make Personas "brighter" when recording? My screen recordings always seem to turn out darker than what's rendered in environment, and manually adjusting the contrast tends to blow out the details in a Persona's face (especially in visionOS 26).

Hi! I am making an app for Apple Vision pro (VisionOS 2.5) that is scanning the surroundings and recognises all the texts around you. I tried to use the AVCaptureSession library, but when I run the app from xcode on the real AVP device, the camera is not accessible. I enabled the camera access in my Info.plist: NSCameraUsageDescription Used for live text recognition and I checked camera settings in the AVP, there are no restrictions. However I have always a black square with a crossed camera icon displayed instead of the image from the camera. I tried a couple of different apps from Github using the AVCaptureSession and they all display the black square instead of the picture. What can be wrong with the camera?

Hello, We're seeing an intermittent issue when playing back FairPlay-protected HLS downloads while the device is offline. Assets are downloaded using AVAggregateAssetDownloadTask with FairPlay protection. After download, asset.assetCache.isPlayableOffline == true. On first playback attempt (offline), ~8% of downloads fail. Retrying playback always works. We recreate the asset and player on each attempt. During the playback setup, we try to load variants via: try await asset.load(.variants) This call sometimes fails with: Error Domain=NSURLErrorDomain Code=-1009 “The Internet connection appears to be offline.” UserInfo={NSUnderlyingError=0x105654a00 {Error Domain=NSURLErrorDomain Code=-1009 “The Internet connection appears to be offline.” UserInfo={NSDescription=The Internet connection appears to be offline.}}, NSErrorFailingURLStringKey=file:///private/var/mobile/Containers/Data/Application/2DDF9D7C-9197-46BE-8690-C23EE75C9E90/Library/com.apple.UserManagedAssets.XVvqfh/Baggage_9DD4E2D3F9C0E68F.movpkg/, NSErrorFailingURLKey=file:///private/var/mobile/Containers/Data/Application/2DDF9D7C-9197-46BE-8690-C23EE75C9E90/Library/com.apple.UserManagedAssets.XVvqfh/Baggage_9DD4E2D3F9C0E68F.movpkg/, NSURL=file:///private/var/mobile/Containers/Data/Application/2DDF9D7C-9197-46BE-8690-C23EE75C9E90/Library/com.apple.UserManagedAssets.XVvqfh/Baggage_9DD4E2D3F9C0E68F.movpkg/, AVErrorFailedDependenciesKey=( “assetProperty_HLSAlternates” ), NSLocalizedDescription=The Internet connection appears to be offline.} This variant load is used to determine available audio tracks, check for Dolby support, and apply user language preferences. After this step, the AVPlayerItem also fails via Combine’s publisher for .status. However, retrying the entire process immediately after (same offline conditions, same asset path, new AVURLAsset) results in successful playback. Assets are represented using the following class: public class DownloadedAsset: AVURLAsset { public let id: String public let localFileUrl: URL public let fairplayLicenseUrlString: String? public let drmToken: String? var isProtected: Bool { return fairplayLicenseUrlString != nil } public init(id: String, localFileUrl: URL, fairplayLicenseUrlString: String?, drmToken: String?) { self.id = id self.localFileUrl = localFileUrl self.fairplayLicenseUrlString = fairplayLicenseUrlString self.drmToken = drmToken super.init(url: localFileUrl, options: nil) } } We use user-selected quality levels to control bitrate and multichannel (e.g. Dolby 5.1) downloads: let downloadQuality = UserDefaults.standard.downloadVideoQuality let bitrate: Int let shouldDownloadMultichannelTracks: Bool switch downloadQuality { case .dataSaver: shouldDownloadMultichannelTracks = false bitrate = 596564 case .standard: shouldDownloadMultichannelTracks = false bitrate = 1503844 case .best: shouldDownloadMultichannelTracks = true bitrate = 7038970 } var selections = multichannelIdentifiedMediaSelections if !shouldDownloadMultichannelTracks { selections = selections.filter { !$0.isMultichannel } } let task = session.aggregateAssetDownloadTask( with: asset, mediaSelections: selections.map { $0.mediaSelection }, assetTitle: title, assetArtworkData: nil, options: [AVAssetDownloadTaskMinimumRequiredMediaBitrateKey: bitrate] ) Seen on devices running iOS 16, iOS 17, and iOS 18. What could cause the initial failure of an otherwise valid, offline-ready FairPlay HLS asset? Could .load(.variants) internally trigger a failed network resolution, even when offline? Is there an internal caching or initialization behavior in AVFoundation that might explain why the second attempt works? Any guidance would be appreciated.

Does anyone know how to pronounce the sound of a specific instrument when you tap a button on the screen on your iPhone or iPad? Now, in the middle of creating a music learning app, I'm thinking of assigning monotones or chords to the button-like frames on the keyboard and fingerboard on the screen. Can it be achieved with SwiftUI chords alone? Once upon a time, MIDI level 1 I remember that there was a pronunciation function of the instrument, but I don't think about implementing the same function in the current OS. Please lend me your wisdom.

Good day, ladies and gents. I have an application that reads audio from the microphone. I'd like it to also be able to read from the Mac's audio output stream. (A bonus would be if it could detect when the Mac is playing music.) I'd eventually be able to figure it out reading docs, but if someone can give a hint, I'd be very grateful, and would owe you the libation of your choice. Here's the code used to set up the AudioUnit: -(NSString*) configureAU { AudioComponent component = NULL; AudioComponentDescription description; OSStatus err = noErr; UInt32 param; AURenderCallbackStruct callback; if( audioUnit ) { AudioComponentInstanceDispose( audioUnit ); audioUnit = NULL; } // was CloseComponent // Open the AudioOutputUnit description.componentType = kAudioUnitType_Output; description.componentSubType = kAudioUnitSubType_HALOutput; description.componentManufacturer = kAudioUnitManufacturer_Apple; description.componentFlags = 0; description.componentFlagsMask = 0; if( component = AudioComponentFindNext( NULL, &description ) ) { err = AudioComponentInstanceNew( component, &audioUnit ); if( err != noErr ) { audioUnit = NULL; return [ NSString stringWithFormat: @"Couldn't open AudioUnit component (ID=%d)", err] ; } } // Configure the AudioOutputUnit: // You must enable the Audio Unit (AUHAL) for input and output for the same device. // When using AudioUnitSetProperty the 4th parameter in the method refers to an AudioUnitElement. // When using an AudioOutputUnit for input the element will be '1' and the output element will be '0'. param = 1; // Enable input on the AUHAL err = AudioUnitSetProperty( audioUnit, kAudioOutputUnitProperty_EnableIO, kAudioUnitScope_Input, 1, &param, sizeof(UInt32) ); chkerr("Couldn't set first EnableIO prop (enable inpjt) (ID=%d)"); param = 0; // Disable output on the AUHAL err = AudioUnitSetProperty( audioUnit, kAudioOutputUnitProperty_EnableIO, kAudioUnitScope_Output, 0, &param, sizeof(UInt32) ); chkerr("Couldn't set second EnableIO property on the audio unit (disable ootpjt) (ID=%d)"); param = sizeof(AudioDeviceID); // Select the default input device AudioObjectPropertyAddress OutputAddr = { kAudioHardwarePropertyDefaultInputDevice, kAudioObjectPropertyScopeGlobal, kAudioObjectPropertyElementMaster }; err = AudioObjectGetPropertyData( kAudioObjectSystemObject, &OutputAddr, 0, NULL, &param, &inputDeviceID ); chkerr("Couldn't get default input device (ID=%d)"); // Set the current device to the default input unit err = AudioUnitSetProperty( audioUnit, kAudioOutputUnitProperty_CurrentDevice, kAudioUnitScope_Global, 0, &inputDeviceID, sizeof(AudioDeviceID) ); chkerr("Failed to hook up input device to our AudioUnit (ID=%d)"); callback.inputProc = AudioInputProc; // Setup render callback, to be called when the AUHAL has input data callback.inputProcRefCon = self; err = AudioUnitSetProperty( audioUnit, kAudioOutputUnitProperty_SetInputCallback, kAudioUnitScope_Global, 0, &callback, sizeof(AURenderCallbackStruct) ); chkerr("Could not install render callback on our AudioUnit (ID=%d)"); param = sizeof(AudioStreamBasicDescription); // get hardware device format err = AudioUnitGetProperty( audioUnit, kAudioUnitProperty_StreamFormat, kAudioUnitScope_Input, 1, &deviceFormat, &param ); chkerr("Could not install render callback on our AudioUnit (ID=%d)"); audioChannels = MAX( deviceFormat.mChannelsPerFrame, 2 ); // Twiddle the format to our liking actualOutputFormat.mChannelsPerFrame = audioChannels; actualOutputFormat.mSampleRate = deviceFormat.mSampleRate; actualOutputFormat.mFormatID = kAudioFormatLinearPCM; actualOutputFormat.mFormatFlags = kAudioFormatFlagIsFloat | kAudioFormatFlagIsPacked | kAudioFormatFlagIsNonInterleaved; if( actualOutputFormat.mFormatID == kAudioFormatLinearPCM && audioChannels == 1 ) actualOutputFormat.mFormatFlags &= ~kLinearPCMFormatFlagIsNonInterleaved; #if __BIG_ENDIAN__ actualOutputFormat.mFormatFlags |= kAudioFormatFlagIsBigEndian; #endif actualOutputFormat.mBitsPerChannel = sizeof(Float32) * 8; actualOutputFormat.mBytesPerFrame = actualOutputFormat.mBitsPerChannel / 8; actualOutputFormat.mFramesPerPacket = 1; actualOutputFormat.mBytesPerPacket = actualOutputFormat.mBytesPerFrame; // Set the AudioOutputUnit output data format err = AudioUnitSetProperty( audioUnit, kAudioUnitProperty_StreamFormat, kAudioUnitScope_Output, 1, &actualOutputFormat, sizeof(AudioStreamBasicDescription)); chkerr("Could not change the stream format of the output device (ID=%d)"); param = sizeof(UInt32); // Get the number of frames in the IO buffer(s) err = AudioUnitGetProperty( audioUnit, kAudioDevicePropertyBufferFrameSize, kAudioUnitScope_Global, 0, &audioSamples, &param ); chkerr("Could not determine audio sample size (ID=%d)"); err = AudioUnitInitialize( audioUnit ); // Initialize the AU chkerr("Could not initialize the AudioUnit (ID=%d)"); // Allocate our audio buffers audioBuffer = [self allocateAudioBufferListWithNumChannels: actualOutputFormat.mChannelsPerFrame size: audioSamples * actualOutputFormat.mBytesPerFrame]; if( audioBuffer == NULL ) { [ self cleanUp ]; return [NSString stringWithFormat: @"Could not allocate buffers for recording (ID=%d)", err]; } return nil; } (...again, it would be nice to know if audio output is active and thereby choose the clean output stream over the noisy mic, but that would be a different chunk of code, and my main question may just be a quick edit to this chunk.) Thanks for your attention! ==Dave [p.s. if i get more than one useful answer, can i "Accept" more than one, to spread the credit around?] {pps: of course, the code lines up prettier in a monospaced font!}

When we use AVPlayer to play DRM encrypted streams, it will not play normally under iOS 17.6.1 system version, and there is a high probability of system restart. This is the relevant core error log: error 14:47:53.323369+0800 audiomxd [AirPlayError] carManager_copyProperty_block_invoke:499: got error -12784/0xFFFFCE10 kCMBaseObjectError_PropertyNotFound error 14:47:53.323414+0800 audiomxd [SPEndpointManagerFactory] SidePlay Endpoint Manager creation failed with -72390/0xFFFEE53A error 14:47:53.364949+0800 audiomxd [APBrowserCarSessionHelper] [0xF6AA] [Bonjour/WiFi] Unrecognized ConnectivityHelper event 101 error 14:47:53.375313+0800 audiomxd AddInstanceForFactory: No factory registered for id <CFUUID 0xa5c5118c0> F8BB1C28-BAE8-11D6-9C31-00039315CD46

No video is playing and the same error is coming. I have tried everything by resetting. Please get an update as soon as possible. error-The operation couldn't be completed. (CoreMediaErrorDomain error -42709.)