Hello, I have an iOS camera app that captures exposure brackets and performs custom HDR processing. On iOS 26, I’m observing a visual difference between: a single photo captured at –2 EV, and the –2 EV frame from an exposure bracket (–2 / 0 / +2 EV). On iOS 26: The single –2 EV image looks natural and consistent. The –2 EV image from the bracket appears clamped / distorted, most noticeably in high dynamic range scenes (highlight compression and loss of detail). On iOS 18, both approaches produce visually identical and correct –2 EV images. The issue only appears for bracketed captures on iOS 26. Attachments (examples) iOS 26 Single capture –2 EV (JPEG): /Users/danilobudimir/Downloads/ios26SingleImage/JPEG image-4006-8B77-51-0.jpeg Single capture –2 EV — Capture report (dumped settings): /Users/danilobudimir/Downloads/ios26SingleImage/UnderExposureDebug_CaptureReport_2026-01-09T15-59-20Z.md Bracket capture –2 EV frame (JPEG): /Users/danilobudimir/Downloads/bracket_iOS26/JPEG image-45CE-9793-A5-0.jpeg Bracket capture — Capture report (dumped settings): /Users/danilobudimir/Downloads/bracket_iOS26/UnderExposureDebug_CaptureReport_2026-01-09T15-55-42Z.md iOS 18 Single capture –2 EV (JPEG): /Users/danilobudimir/Downloads/ios18SingleImage/JPEG image-47FD-AF73-28-0.jpeg Single capture –2 EV — Capture report: /Users/danilobudimir/Downloads/ios18SingleImage/UnderExposureDebug_CaptureReport_2026-01-09T16-25-27Z.md Bracket capture — –2 EV frame (JPEG): /Users/danilobudimir/Downloads/bracket_iOS18/JPEG image-4A4C-9E93-46-0.jpeg Bracket capture — Capture report: /Users/danilobudimir/Downloads/bracket_iOS18/UnderExposureDebug_CaptureReport_2026-01-09T16-27-23Z.md Question Is there any new behavior in iOS 26 AVFoundation related to: AVCapturePhotoBracketSettings, tone mapping / HDR preprocessing, or internal image processing applied specifically to bracketed frames? Is there a new flag, format requirement or opt-out mechanism required to preserve linear underexposed frames in exposure brackets?

Looking to implement to UI to tell the user to clean their lens in our app. Implemented the KVO for the cameraLensSmudgeDetectionStatus but I'm having issues reliably triggering it in, both in our app and the main camera app. Tried to get inventive by putting tupperware over the lens, but I think the model driving this or the LiDAR sensor might be smart enough to detect there is something close to the lens. Is there any way to trigger this change in a similar way we can trigger thermal changes in debug? Thanks.

I occasionally receive reports from users that photo import from the Photos library gets stuck and the progress appears to stop indefinitely. I’m using the following APIs (code to be added): func fetchAsset(_ asset: PHAsset) { let options = PHImageRequestOptions() options.deliveryMode = .highQualityFormat options.resizeMode = .exact options.isSynchronous = false options.isNetworkAccessAllowed = true options.progressHandler = { (progress, error, stop, info) in // 🚨 never called } let requestId = PHImageManager.default().requestImageDataAndOrientation( for: asset, options: options ) { data, _, _, info in // 🚨 never called } } Due to repeated reports, I added detailed logs inside the callback closures. Based on the logs, it looks like the request keeps waiting without any callbacks being invoked — neither the progressHandler nor the completion block of requestImageDataAndOrientation is called. This happens not only with the PHImageManager approach, but also when using PHAsset with PHContentEditingInputRequestOptions — the completion callback is not invoked as well. func fetchAssetByContentEditingInput(_ asset: PHAsset) { let options = PHContentEditingInputRequestOptions() options.isNetworkAccessAllowed = true asset.requestContentEditingInput(with: nil) { contentEditingInput, info in // 🚨 never called } } I suspect this is related to iCloud Photos. Here is what I confirmed from affected users: 1. Using the native picker, iCloud download proceeds normally and the photo can be attached. However, using the PHImageManager-based approach in my app, the same photo cannot be attached. 2. Even after verifying that the photo has been fully downloaded from iCloud (e.g., by trying “Export Unmodified Originals” in the Photos app as described here: https://support.apple.com/en-us/111762, and confirming the iCloud download progress completed), the callback is still not invoked for that asset. Detailed flow for (1): • I asked the user to attach the problematic photo (the one where callbacks never fire) using the native photo picker (UIImagePickerController). • The UI showed “Downloading from iCloud” progress. • The progress advanced and the photo was attached successfully. • Then I asked the user to attach the same photo again using my custom photo picker (which uses the PHImageManager APIs mentioned above). • The progress did not advance. • No callbacks were invoked. • The operation waited indefinitely and never completed. Workaround / current behavior: • If I ask users to force-quit and relaunch the app and try again, about 6 out of 10 users can attach successfully afterward. • The remaining ~4 out of 10 users still cannot attach even after relaunching. • For users who are not fixed immediately after relaunch, it seems to resolve naturally after some time. I’ve seen similar reports elsewhere, so I’m wondering if Apple is already aware of an internal issue related to this. If there is any known information, guidance, or recommended workaround, I would appreciate it. I also logged the properties of affected PHAssets (metadata) when the issue occurs, and I can share them below if that helps troubleshooting: [size=3.91MB] [PHAssetMediaSubtype(rawValue: 528)+DepthEffect | userLibrary | (4284x5712) | adjusted=true] [size=3.91MB] [PHAssetMediaSubtype(rawValue: 528)+DepthEffect | userLibrary | (4284x5712) | adjusted=true] [size=2.72MB] [PHAssetMediaSubtype(rawValue: 16)+DepthEffect | userLibrary | (3024x4032) | adjusted=true] [size=2.72MB] [PHAssetMediaSubtype(rawValue: 16)+DepthEffect | userLibrary | (3024x4032) | adjusted=true] [size=2.49MB] [PHAssetMediaSubtype(rawValue: 16)+DepthEffect | userLibrary | (3024x4032) | adjusted=true] [size=2.49MB] [PHAssetMediaSubtype(rawValue: 16)+DepthEffect | userLibrary | (3024x4032) | adjusted=true]

I am unable to find any clearcut documentation on configuring AVCaptureSession pipeline to capture video with proResRAW codec type, which is 16 bit format. Is it supported only with AVCaptureMovieFileOutput or one can have AVCaptureVideoDataOutput emitting 16-bit sample buffers that can be vended to AVAssetWriter?

Hello, I am getting the following error while attempting to run my LockedCameraCapture compatible app on an iOS 15 device: dyld[434]: Library not loaded: '/System/Library/Frameworks/LockedCameraCapture.framework/LockedCameraCapture' Referenced from: '/private/var/containers/Bundle/Application/.../MyApp.app/MyApp.debug.dylib' Reason: tried: '/System/Library/Frameworks/LockedCameraCapture.framework/LockedCameraCapture' (no such file) Of course iOS 15 doesn't have the library for LockedCameraCapture, but I have had no issue including Lock Screen Widgets (which require iOS 16), so I am not sure why the error is popping up. Thank you!

I have a complex CoreImage pipeline which I'm keen to optimise. I'm aware that calling back to the CPU can have a significant impact on the performance - what is the best way to find out where this is happening?

This is an issue with the Insta360 Flow Pro 2. My iOS app uses DockKit to control the gimbal; in particular, my app disables tracking and sends angular velocity commands to control the gimbal's orientation. I only try to modify the yaw (rotation around the vertical axis); never the pitch or yaw. Note that I don't send the gimbal to a particular orientation directly; I modify the velocity. Everything works great for a long period of time: typically for a continuous run of 4-6 hours; in the most recent case, I managed about 36 hours of continous operation before the following problem occurred. I came back to check on the system, and because no visual activity had occurred in the camera's field of view for a while, the phone had commanded the gimbal to rotate back to a yaw angle of 0 degrees. So the phone in the gimbal should have been looking straight ahead (i.e. the 0 degree yaw position), but it was definitely looking off at an angle. I've seen this twice now. The first time, when it should have been looking straight ahead, it was in fact looking 60 degrees off center. This time (caught on video, see below), it was off by 22 degrees from center. Here's the weird part: the gimbal reports this way off center positioning as zero degrees (well close enough to zero, like 0.2 or something that's fine). But, mechanically, the gimbal still knows where zero degrees is: if we double click on the trigger of the Flow Pro 2, which is supposed to reset the gimbal to 0 degrees yaw and pitch, the gimbal responds correctly and reorients to a 0 degree position. However, the yaw values it reports are not zero, but as shown in my video, 22 degrees off axis or so. Power cycling the gimbal and restarting immediately fixes the problem. Also, I switched from my app to the Insta360 app, which caused the phone to flip from landscape to portrait, then when I returned to my app and switched back to landscape, the gimbal now started reporting correct yaw angles. Is there a possibility this is a bug in the DockKit framework? Has anyone seen this? I have a case open with Insta360, but although it's clearly a software issue, it's not clear if it's in Insta360's code or the DockKit layer. Any ideas for how I can get out of this mode? My concern is that the phone is in a tripod about 10' off the floor, and not very accessible. Also, if all goes well, we may have about 50 of these systems running, and having to fix them one by one after a few hours is not good. For a demonstration of this bug, see the following video: https://octoparry.com/offset.MOV Any help greatly appreciated.

If I want to edit image in preview app. But there is only option to rotate left and right 90degree rotations. No option to rorate in any prticular angle. So Please look into this and provide option in next update

Hello everyone, I am looking for a solution to programmatically, e.g. using AppleScript to import photos into the Photos library on MacOS and also push them to the shared library, like it can be done using the standard GUI of the Photos application. Maybe it is not possible using AppleScript, but using a short Swift script and PhotoKit, I do not not know. Any help is appreciated! Thomas

Hello everyone, I’m working on an iOS app that fetches videos from the "Recently Deleted" album using the Photos framework in Swift. However, I’m unable to fetch any videos, even though the "Recently Deleted" album contains 233 items (including videos), as seen in the Photos app. Environment: iOS Version: 18.3.1 Xcode Version: 16.2 Swift Version: Swift 5 Device: iPhone (simulator and physical device both tested) Photo Library Permission: "All Photos" access granted Recently Deleted Lock: Face ID/Passcode is disabled for "Recently Deleted"

when I get results from picker: PHPickerViewController, didFinishPicking results: [PHPickerResult]) and I load the image using itemProvider .loadFileRepresentation (the itemProvider is the NSItemProvider provided by the PHPickerResult) will the url that's returned by this method be guaranteed to have the file extension ie, "file://image.jpeg" not "file://image" I want to know if i need to just check the extension to know its file type. (FYI in case this makes a difference, im only interested in user screenshots and screenrecordings)

I am developing a video streaming app for iPhone. Minimum version is IOS 13. I want to connect an external USB camera to the iPhone app and stream from it. I have looked through a lot of information and have not found how to do this. Is it possible to do this? Is there any documentation on this?

Has Objective-C been deprecated?

Hi all, In MacOS, how can I disable or enable build-in camera by program or script?

I'm working on an application that uses the iPhone camera for scientific purposes - and, as a result would like to receive sensor data in as unprocessed format as possible. I'm using AVCapturePhotoOutput to take Bayer RAW stills and receiving data in kCVPixelFormatType_14Bayer_RGGB format. However, I'm puzzled as to the content of the bits. I simply demosaic the image by taking each 2x2 square: RG GB and use R, (G+G)/2, B to get 16-bit RGB values - and this indeed works. However, I am puzzled as to the values we are getting as they seem to be approximately in the range 2048 - 16383. The top value is understandable - the maximum that you can fit in 14-bits (as implied by the pixel format type). However we don't seem to be able to get lower than ~2048 no matter how black/dark we make the sensor. I'm aware that the sensor is probably not 14-bits (we're using the iPhone 16e camera) and that maybe this is to do with the way the sensor data is packaged. The Advances in iOS Photography video (https://developer.apple.com/videos/play/wwdc2016/501/) describes it as "10-bit sensor RAW packaged in 14 bits per pixel instead of eight." Is there any documentation describing what is going on here? It's vital for our use that we get as close to the raw camera sensor light readings as possible, so any pointers as to the mapping (e.g. decompanding?) being used would be extremely useful. Many thanks in advance for your help.

I have an iOS app that includes a Photo Editing Extension and is optimized for Mac Catalyst so you can edit photos in the Photos app on your Mac. This has worked really well but now I am encountering an error alert trying to open the photo editing extension: RBSLaunchRequest error trying to launch plugin com.company.TestEditor. TestPhotoEditor (B7A616A7-2 5A8-4E02-8B32-5CAB37C8B4B2): ErrorDomain=RBSRequestErrorDomain Code=5 "Launch failed." UserInfo={NSLocalizedFailureReason=Launch failed., NSUnderlyingError=0x7f08fafd0 {ErrorDomain=NSPOSIXErrorDomain Code=153 "Unknown error: 153" UserInfo={NSLocalizedDescription=Launchd job spawn failed}}} Create a new iOS app project in Xcode Create a new target and choose iOS > Photo Editing Extension For both targets in the project, add Mac Catalyst as a supported destination Run the app on My Mac (Mac Catalyst) Open the Photos app, double click a photo, click Edit, click the more plugins button, and click TestPhotoEditor in the list macOS 15.4.1 + Xcode 16.3

Hi guys, How to achieve the following feature on macOS when a USB device (Camera/Mic/Speaker) is connected: When a third-party video conferencing app is not in a meeting, ensure the app defaults to using the USB device (Camera/Mic/Speaker). When a third-party conferencing app is in a meeting, ensure the app automatically switches to the USB device (Camera/Mic/Speaker). I want to make use of IOKit extension to hidden or ignore build-in camera to realize the requirement. however the extension can't be loaded for Invalid permissions in MacOS 15.4.1, buildVersion:24E263. I also tried to run in in MacOS 14.4.1, which can be loaded but can't auto load when restart laptop as KDK version not match. Could you please give me some suggestion? Is it possible hidden build-in camera in MacOS M-series chip? Is there any other method to realize the feature. Thanks a lot.

Hi guys, Can I use CMIO to achieve the following feature on macOS when a USB device (Camera/Mic/Speaker) is connected: When a third-party video conferencing app is not in a meeting, ensure the app defaults to using the USB device (Camera/Mic/Speaker). When a third-party conferencing app is in a meeting, ensure the app automatically switches to the USB device (Camera/Mic/Speaker).

Does the library exists in xCode 16.4? "import WorldCaptureKit" gives error "No such module 'WorldCaptureKit'". And I do not find any information about the library in the apple documentation. But AI keeps suggesting me to use the library

Can i use iokit usb lib to disable build-in camera?