I've got a setup using AVAudioEngine with several tone generator nodes, each with a chain of processing nodes, the chains then mixed into the main output. Generator ➡️ Effect ➡️... ➡️ .mainMixerNode ➡️ .outputNode). Generator ➡️ Effect ➡️... ⤴️ ... Generator ➡️ Effect ➡️... ⤴️ The user should be able to mute any chain individually. I've found several potential approaches to muting, but not terribly happy with any of them. Adjust the amplitudes directly in my tone generators. Issue: Consumes CPU even when completely muted. 4 generators adds ~15% cpu, even when all chains are muted. Detach/attach chains that are muted/unmuted. Issue: Causes loud clicking/popping sounds whenever muted/unmuted. Fade mixer output volume while detaching/attaching a chain (just cutting the volume immediately to 0 doesn't get rid of the clicking/popping). Issue: Causes all channels to fade during the transition, so not ideal. The rest of these ideas are variations on making volume control+detatch/attach work for individual chains, since approach #3 worked well. Add an AVAudioMixer to the end of each chain (just for volume control). Issue: Only the mixer on the final chain functions -- the others block all output. Not sure what's going on there. Use matrix mixer (for multi-input volume control). Plus detach/attach to reduce CPU if necessary. Not yet attempted, due to perceived complexity and reports of fragility in order of wiring in. A bunch of effort before I even know if it's going to work. Develop my own fader node to put on the end of each channel. Unlike the tone generator (simple AVSourceNode), developing an effect node seems complex and time consuming. Might not even fix CPU use. I'm not completely averse to the learning curve of either 5 or 6, but would rather get some guidance on best approach before diving in. They both seem likely to take more effort than I'd like for the simple behavior I'm trying to achieve.

hi, i need to read wether the transport is playing or stopped but my current method that works for vst does not work for au. is there a lpx resource available for developers anywhere? if (auto* playHead = processor->getPlayHead()) { juce::AudioPlayHead::CurrentPositionInfo posInfo; if (playHead->getCurrentPosition(posInfo)) { bool isCurrentlyPlaying = posInfo.isPlaying; if (isCurrentlyPlaying != wasTransportPlaying) { if (isCurrentlyPlaying) { wasTransportPlaying = isCurrentlyPlaying; startAllTimers(); } else { wasTransportPlaying = isCurrentlyPlaying; stopAllTimers(); } } } } thanks :)

According to the header file the outputVolume properties supported range is 0.0-1.0: /*! @property outputVolume @abstract The mixer's output volume. @discussion This accesses the mixer's output volume (0.0-1.0, inclusive). @property (nonatomic) float outputVolume; However when setting the volume to 2.0 the audio does indeed play louder. Is the header file out of date and if so, what is the supported range for outputVolume? Thanks

I developed an educational app that implements audio-video communication through RTC, while using WebView to display course materials during classes. However, some users are experiencing an issue where the audio playback from WebView is very quiet. I've checked that the AVAudioSessionCategory is set by RTC to AVAudioSessionCategoryPlayAndRecord, and the AVAudioSessionCategoryOption also includes AVAudioSessionCategoryOptionMixWithOthers. What could be causing the WebView audio to be suppressed, and how can this be resolved?

I am developing an app that uses MusicKit to play music and then I need to have spoken words played to the user, while ducking the audio coming from MusicKit (application music player) the built in Siri voices are not off sufficient quality so I am using an external service to create an mp3 file and then play this back using AVAudioSession Sample code below the problem I am having is that .duckOthers is not ducking the Application Music Player output Is this a bug or am I doing this wrong? // Configure audio session for system-wide ducking try AVAudioSession.sharedInstance().setCategory(.playback, mode: .spokenAudio, options: [.duckOthers, .mixWithOthers]) try AVAudioSession.sharedInstance().setActive(true) // Set the ducking level to maximum try AVAudioSession.sharedInstance().setPreferredIOBufferDuration(0.005) // Create and configure audio player self.audioPlayer = try AVAudioPlayer(data: audioData) self.audioPlayer?.delegate = self self.audioPlayer?.volume = 1.0 // Ensure full volume for speech self.audioPlayer?.prepareToPlay() // Set the audio player's settings for maximum clarity self.audioPlayer?.enableRate = false self.audioPlayer?.pan = 0.0 // Center the audio self.audioPlayer?.play()

I’m developing a macOS audio monitoring app using AVAudioEngine, and I’ve run into a critical issue on macOS 26 beta where AVFoundation fails to detect any input devices, and AVAudioEngine.start() throws the familiar error 10877. FB#: FB19024508 Strange Behavior: AVAudioEngine.inputNode shows no channels or input format on bus 0. AVAudioEngine.start() fails with -10877 (AudioUnit connection error). AVCaptureDevice.DiscoverySession returns zero audio devices. Microphone permission is granted (authorized), and the app is properly signed and sandboxed with com.apple.security.device.audio-input. However, CoreAudio HAL does detect all input/output devices: Using AudioObjectGetPropertyDataSize and AudioObjectGetPropertyData with kAudioHardwarePropertyDevices, I can enumerate 14+ devices, including AirPods, USB DACs, and BlackHole. This suggests the lower-level audio stack is functional. I have tried: Resetting CoreAudio with sudo killall coreaudiod Rebuilding and re-signing the app Clearing TCC with tccutil reset Microphone Running on Apple Silicon and testing Rosetta/native detection via sysctl.proc_translated Using a fallback mechanism that logs device info from HAL and rotates logs for submission via Feedback Assistant I have submitted logs and a reproducible test case via Feedback Assitant : FB#: FB19024508]

Dear Sirs, I’ve written a virtual audio driver based on AudioDriverKit and running as dext in my MacOS app. Sometimes when waking up from a sleep state the recording side of my driver extension seems to hang and I don’t see any calls to my io_operation callback. Then the recording app like a DAW seems to hang when trying to start a recording. This doesn’t happen after short sleep states or after a complete new start of my MacBook. I already opened a case in Feedback-Assistant on 5th of May (FB17503622) which also includes a sysdiagnose and a ktrace but I didn't get any feedback so far. Meanwhile some of our customers are getting angry and I'd like to know if there's anything I could do to fix this problem on my side. We’re not sure whether this worked in previous MacOS versions, we think we didn’t observe this before 15.3.1 but at least since 15.3.1. we’ve seen this problem. Best regards, Johannes

Let's consider the following code. I've created an actor that loads a list of .mp3 files from a Bundle and then makes it available for audio reproduction. Unfortunately, I'm experiencing a memory leak. At the play method. player.play() From Instruments I get _malloc_type_malloc_outlined libsystem_malloc.dylib start_wqthread libsystem_pthread.dylib private actor AudioActor { enum Failure: Error { case soundsNotLoaded([AudioPlayerClient.Sound: Error]) } enum Player { case music(AVAudioPlayer) } var players: [Sound: Player] = [:] let bundles: [Bundle] init(bundles: UncheckedSendable<[Bundle]>) { self.bundles = bundles.wrappedValue } func load(sounds: [Sound]) throws { try AVAudioSession.sharedInstance().setActive(true, options: []) var errors: [Sound: Error] = [:] for sound in sounds { guard let url = bundle.url(forResource: sound.name, withExtension: "mp3") else { continue } do { self.players[sound] = try .music(AVAudioPlayer(contentsOf: url)) } catch { errors[sound] = error } } guard errors.isEmpty else { throw Failure.soundsNotLoaded(errors) } } func play(sound: Sound, loops: Int?) throws { guard let player = self.players[sound] else { return } switch player { case let .music(player): player.numberOfLoops = loops ?? -1 player.play() } } func stop(sound: Sound) throws { guard let player = self.players[sound] else { throw Failure.soundsNotLoaded([:]) } switch player { case let .music(player): player.stop() } } }

I ran 5.1 audio tests in both YouTube and Apple Music, and I noticed that when sound is supposed to play from the rear or front surround speakers, it’s also duplicated in the front left and right channels. I’m absolutely sure the issue is with the Apple TV, because I played the same video directly through my TV’s native system, and the channel separation was correct. Everything used to work perfectly before, so this must be a software issue. I’m currently on tvOS 26 Developer Beta 5, but I’m certain the problem also existed on the stable tvOS 18.5. I’ve already reset and updated my Apple TV, and I also tried switching the audio format to forced Dolby Atmos 5.1. On the forums, I mostly see complaints about Dolby Atmos not working at all — in my case, everything technically works, but not the way it’s supposed to.

Hi team, With regards to Call (Live) Translations on VOIP: Is it possible to invoke live translations within the app? (without going into the Call System UI) Is it possible to navigate users from app to Call System UI via an API? (and also invoking the new live translations directly) Will Apple support more languages apart from the current ones? (Currently I see 4 supported languages)

Since iOS 18, the system setting “Allow Audio Playback” (enabled by default) allows third-party app audio to continue playing while the user is recording video with the Camera app. This has created a problem for the app I’m developing. ➡️ The problem: My app plays continuous audio in both foreground and background states. If the user starts recording video using the iOS Camera app, the app’s audio — still playing in the background — gets captured in the video — obviously an unintended behavior. Yes, the user could stop the app manually before starting the video recording, but that can’t be guaranteed. As a developer, I need a way to stop the app’s audio before the video recording begins. So far, I haven’t found a reliable way to detect when video recording starts if ‘Allow Audio Playback’ is ON. ➡️ What I’ve tried: — AVAudioSession.interruptionNotification → doesn’t fire — devicesChangedEventStream → not triggered I don’t want to request mic permission (app doesn’t use mic). also, disabling the app from playing audio in the background isn’t an option as it is a crucial part of the user experience ➡️ What I need: A reliable, supported way to detect when the Camera app begins video recording, without requiring mic access — so I can stop audio and avoid unintentional overlap with the user’s recordings. Any official guidance, workarounds, or AVFoundation techniques would be greatly appreciated. Thanks.

Overview We are producing audio in real time from an editing application and are trying to put that on an HLS stream. We attempt to submit PCM samples through an audio writer but are getting a crash after a select number of samples have been appended. Depending on the number of audio frames in the PCM buffer, we might get more iterations before the crash but it always has the same traceback (see below). Code The setup is rather simple. We took inspiration from a few sources around the web. NSMutableDictionary *audio = [[NSMutableDictionary alloc] init]; [audio setObject:@(kAudioFormatMPEG4AAC) forKey:AVFormatIDKey]; [audio setObject:[NSNumber numberWithInt:config.audioSampleRate] // 48000 forKey:AVSampleRateKey]; [audio setObject:[NSNumber numberWithInt:config.audioChannels] // 2 forKey:AVNumberOfChannelsKey]; [audio setObject:@160000 forKey:AVEncoderBitRateKey]; m_audioConfig = [[NSDictionary alloc] initWithDictionary:audio]; m_audio = [[AVAssetWriterInput alloc] initWithMediaType:AVMediaTypeAudio outputSettings:m_audioConfig]; AVAudioFrameCount audioFrames = BUFFER_SAMPLES * bCount; AVAudioPCMBuffer *pcmBuffer = [[AVAudioPCMBuffer alloc] initWithPCMFormat:m_full.pcmFormat frameCapacity:audioFrames]; pcmBuffer.frameLength = pcmBuffer.frameCapacity; AudioChannelLayout layout; memset(&layout, 0, sizeof(layout)); layout.mChannelLayoutTag = kAudioChannelLayoutTag_Stereo; CMFormatDescriptionRef format; OSStatus stats = CMAudioFormatDescriptionCreate( kCFAllocatorDefault, pcmBuffer.format.streamDescription, sizeof(layout), &layout, 0, nil, nil, &format ); for (int i = 0; i < bCount; i++) { AudioPCM pcm; audioCallback->callback(pcm); memcpy(*(pcmBuffer.int16ChannelData) + (bufferSize * i), pcm.data, bufferSize); } size_t samplesConsumed = BUFFER_SAMPLES * bCount; CMSampleBufferRef sampleBuffer; CMSampleTimingInfo timing; timing.duration = CMTimeMake(1, config.audioSampleRate); timing.presentationTimeStamp = presentationTime; timing.decodeTimeStamp = kCMTimeInvalid; OSStatus ostatus = CMSampleBufferCreate( kCFAllocatorDefault, nil, false, nil, nil, format, (CMItemCount)pcmBuffer.frameLength, 1, &timing, 0, nil, &sampleBuffer ); //// ostatus = CMSampleBufferSetDataBufferFromAudioBufferList( sampleBuffer, kCFAllocatorDefault, kCFAllocatorDefault, kCMSampleBufferFlag_AudioBufferList_Assure16ByteAlignment, pcmBuffer.audioBufferList ); if (ostatus != noErr) { NSLog(@"fill audio sample from buffer list failed: %s", logAudioError(ostatus)); return; } ostatus = CMSampleBufferSetDataReady(sampleBuffer); if (ostatus != noErr) { NSLog(@"set sample buffer ready failed: %s", logAudioError(ostatus)); return; } // Finally we can attach it, then shove the presentation time forward [m_audio appendSampleBuffer:sampleBuffer]; The Crash The crash points towards some level of deallocation when the conversion tooling is done or has enough samples to process an output packet? It's had to say. 0 caulk 0x1a1e9532c caulk::alloc::tiered_allocator<caulk::alloc::size_range_tier<0ul, 1008ul, caulk::alloc::tree_allocator<caulk::alloc::chunk_allocator<caulk::alloc::page_allocator, caulk::alloc::bitmap_allocator, caulk::alloc::embed_block_memory, 16384ul, 16ul, 6ul>>>, caulk::alloc::size_range_tier<1009ul, 256000ul, caulk::alloc::guarded_edges_allocator<caulk::alloc::consolidating_free_map<caulk::alloc::page_allocator, 10485760ul>, 4ul>>, caulk::alloc::tracking_allocator<caulk::alloc::page_allocator>>::deallocate(caulk::alloc::block, unsigned long) + 636 1 AudioToolboxCore 0x1993fbfe4 ExtendedAudioBufferList_Destroy + 112 2 AudioToolboxCore 0x1993d5fe0 std::__1::__optional_destruct_base<ACCodecOutputBuffer, false>::~__optional_destruct_base[abi:ne180100]() + 68 3 AudioToolboxCore 0x1993d5f48 acv2::CodecConverter::~CodecConverter() + 196 4 AudioToolboxCore 0x1993d5e5c acv2::CodecConverter::~CodecConverter() + 16 5 AudioToolboxCore 0x1992574d8 std::__1::vector<std::__1::unique_ptr<acv2::AudioConverterBase, std::__1::default_delete<acv2::AudioConverterBase>>, std::__1::allocator<std::__1::unique_ptr<acv2::AudioConverterBase, std::__1::default_delete<acv2::AudioConverterBase>>>>::__clear[abi:ne180100]() + 84 6 AudioToolboxCore 0x199259acc acv2::AudioConverterChain::RebuildConverterChain(acv2::ChainBuildSettings const&) + 116 7 AudioToolboxCore 0x1992596ec acv2::AudioConverterChain::SetProperty(unsigned int, unsigned int, void const*) + 1808 8 AudioToolboxCore 0x199324acc acv2::AudioConverterV2::setProperty(unsigned int, unsigned int, void const*) + 84 9 AudioToolboxCore 0x199327f08 with_resolved(OpaqueAudioConverter*, caulk::function_ref<int (AudioConverterAPI*)>) + 60 10 AudioToolboxCore 0x1993281e4 AudioConverterSetProperty + 72 11 MediaToolbox 0x1a7566c2c FigSampleBufferProcessorCreateWithAudioCompression + 2296 12 MediaToolbox 0x1a754db08 0x1a70b5000 + 4819720 13 MediaToolbox 0x1a754dab4 FigMediaProcessorCreateForAudioCompressionWithFormatWriter + 100 14 MediaToolbox 0x1a77ebb98 0x1a70b5000 + 7564184 15 MediaToolbox 0x1a7804158 0x1a70b5000 + 7663960 16 MediaToolbox 0x1a7801da0 0x1a70b5000 + 7654816 17 AVFCore 0x1ada530c4 -[AVFigAssetWriterTrack addSampleBuffer:error:] + 192 18 AVFCore 0x1ada55164 -[AVFigAssetWriterAudioTrack _flushPendingSampleBuffersReturningError:] + 500 19 AVFCore 0x1ada55354 -[AVFigAssetWriterAudioTrack addSampleBuffer:error:] + 472 20 AVFCore 0x1ada4ebf0 -[AVAssetWriterInputWritingHelper appendSampleBuffer:error:] + 128 21 AVFCore 0x1ada4c354 -[AVAssetWriterInput appendSampleBuffer:] + 168 22 lib_devapple_hls.dylib 0x115d2c7cc detail::AppleHLSImplementation::audioRuntime() + 1052 23 lib_devapple_hls.dylib 0x115d2d094 void* std::__1::__thread_proxy[abi:ne180100]<std::__1::tuple<std::__1::unique_ptr<std::__1::__thread_struct, std::__1::default_delete<std::__1::__thread_struct>>, void (detail::AppleHLSImplementation::*)(), detail::AppleHLSImplementation*>>(void*) + 72 24 libsystem_pthread.dylib 0x196e5b2e4 _pthread_start + 136 Any insight would be welcome!

After updating to iOS 18.5, we’ve observed that outgoing audio from our app intermittently stops being transmitted during VoIP calls using AVAudioSession configured with .playAndRecord and .voiceChat. The session is set active without errors, and interruptions are handled correctly, yet audio capture suddenly ceases mid-call. This was not observed in earlier iOS versions (≤ 18.4). We’d like to confirm if there have been any recent changes in AVAudioSession, CallKit, or related media handling that could affect audio input behavior during long-running calls. func configureForVoIPCall() throws { try setCategory( .playAndRecord, mode: .voiceChat, options: [.allowBluetooth, .allowBluetoothA2DP, .defaultToSpeaker]) try setActive(true) }

My current app implements a custom video player, based on a AVSampleBufferRenderSynchronizer synchronising two renderers: an AVSampleBufferDisplayLayer receiving decoded CVPixelBuffer-based video CMSampleBuffers, and an AVSampleBufferAudioRenderer receiving decoded lpcm-based audio CMSampleBuffers. The AVSampleBufferRenderSynchronizer is started when the first image (in presentation order) is decoded and enqueued, using avSynchronizer.setRate(_ rate: Float, time: CMTime), with rate = 1 and time the presentation timestamp of the first decoded image. Presentation timestamps of video and audio sample buffers are consistent, and on most streams, the audio and video are correctly synchronized. However on some network streams, on iOS, the audio and video aren't synchronized, with a time difference that seems to increase with time. On the other hand, with the same player code and network streams on macOS, the synchronization always works fine. This reminds me of something I've read, about cases where an AVSampleBufferRenderSynchronizer could not synchronize audio and video, causing them to run with independent and potentially drifting clocks, but I cannot find it again. So, any help / hints on this sync problem will be greatly appreciated! :)

Does anyone know how to pronounce the sound of a specific instrument when you tap a button on the screen on your iPhone or iPad? Now, in the middle of creating a music learning app, I'm thinking of assigning monotones or chords to the button-like frames on the keyboard and fingerboard on the screen. Can it be achieved with SwiftUI chords alone? Once upon a time, MIDI level 1 I remember that there was a pronunciation function of the instrument, but I don't think about implementing the same function in the current OS. Please lend me your wisdom.

Two issues: No matter what I set in try audioSession.setPreferredSampleRate(x) the sample rate on both iOS and macOS is always 48000 when the output goes through the speaker, and 24000 when my Airpods connect to an iPhone/iPad. Now, I'm checking the current output loudness to animate a 3D character, using mixerNode.installTap(onBus: 0, bufferSize: y, format: nil) { [weak self] buffer, time in Task { @MainActor in // calculate rms and animate character accordingly but any buffer size under 4800 is just ignored and the buffers I get are 4800 sized. This is ok, when the sampleRate is currently 48000, as 10 samples per second lead to decent visual results. But when AirPods connect, the samplerate is 24000, which means only 5 samples per second, so the character animation looks lame. My AVAudioEngine setup is the following: audioEngine.connect(playerNode, to: pitchShiftEffect, format: format) audioEngine.connect(pitchShiftEffect, to: mixerNode, format: format) audioEngine.connect(mixerNode, to: audioEngine.outputNode, format: nil) Now, I'd be fine if the outputNode runs at whatever if it needs, as long as my tap would get at least 10 samples per second. PS: Specifying my favorite format in the let format = AVAudioFormat(standardFormatWithSampleRate: 48_000, channels: 2)! mixerNode.installTap(onBus: 0, bufferSize: y, format: format) doesn't change anything either

Hello, I'm trying to receive parquet files using the example that provided in documentation. I've done all required steps but receive constantly error 500 with "Upstream Service Error". By looking into the issues list, seems this error exists for months. Is it possible to get it working?

Hello, i can successfully match music using shazamkit on Apple using SwiftUI, a simple app that let user to load an audio file and exctracts the relative match, while i am unable to match music using shamzamkit on Android. I am trying to make the same simple app but i cannot match music as i get MATCH_ATTEMPT_FAILED every time i try to. I don't know what i am doing wrong but the shazam part in the kotlin Android code is in this method : suspend fun processAudioFileInBackground( filePath: String, developerTokenProvider: DeveloperTokenProvider ) = withContext(Dispatchers.IO) { val bufferSize = 1024 * 1024 val audioFile = FileInputStream(filePath) val byteBuffer = ByteBuffer.allocate(bufferSize) byteBuffer.order(ByteOrder.LITTLE_ENDIAN) var bytesRead: Int while (audioFile.read(byteBuffer.array()).also { bytesRead = it } != -1) { val signatureGenerator = (ShazamKit.createSignatureGenerator(AudioSampleRateInHz.SAMPLE_RATE_44100) as ShazamKitResult.Success).data signatureGenerator.append(byteBuffer.array(), bytesRead, System.currentTimeMillis()) val signature = signatureGenerator.generateSignature() println("Signature: ${signature.durationInMs}") val catalog = ShazamKit.createShazamCatalog(developerTokenProvider, Locale.ENGLISH) val session = (ShazamKit.createSession(catalog) as ShazamKitResult.Success).data val matchResult = session.match(signature) println("MatchResult : $matchResult") setMatchResult(matchResult) byteBuffer.clear() } audioFile.close() } I noticed that changing Locale in catalog creation results in different result as i get NoMatch without exception. Can you please help me with this? Do i need to create a custom catalog?

A bit of a novice to app development here but I have a paid developer account, I have registered the identifier for MusicKit on the developer website (using the bundle identifier I've selected in Xcode) but the option to add MusicKit as a capability is not available in Xcode? I've manually updated the certificates, closed the app and reopened it, started a new project and tried with a different demo project? Apologies if I am missing something obvious but could someone help me get this capability added?

Hello! I'm experiencing an issue with iOS's audio routing system when trying to use Bluetooth headphones for audio output while also recording environmental audio from the built-in microphone. Desired behavior: Play audio through Bluetooth headset (AirPods) Record unprocessed environmental audio from the iPhone's built-in microphone Actual behavior: When explicitly selecting the built-in microphone, iOS reports it's using it (in currentRoute.inputs) However, the actual audio data received is clearly still coming from the AirPods microphone The audio is heavily processed with voice isolation/noise cancellation, removing environmental sounds Environment Details Device: iPhone 12 Pro Max iOS Version: 18.4.1 Hardware: AirPods Audio Framework: AVAudioEngine (also tried AudioQueue) Code Attempted I've tried multiple approaches to force the correct routing: func configureAudioSession() { let session = AVAudioSession.sharedInstance() // Configure to allow Bluetooth output but use built-in mic try? session.setCategory(.playAndRecord, options: [.allowBluetoothA2DP, .defaultToSpeaker]) try? session.setActive(true) // Explicitly select built-in microphone if let inputs = session.availableInputs, let builtInMic = inputs.first(where: { $0.portType == .builtInMic }) { try? session.setPreferredInput(builtInMic) print("Selected input: \(builtInMic.portName)") } // Log the current route let route = session.currentRoute print("Current input: \(route.inputs.first?.portName ?? "None")") // Configure audio engine with native format let inputNode = audioEngine.inputNode let nativeFormat = inputNode.inputFormat(forBus: 0) inputNode.installTap(onBus: 0, bufferSize: 1024, format: nativeFormat) { buffer, time in // Process audio buffer // Despite showing "Built-in Microphone" in route, audio appears to be // coming from AirPods with voice isolation applied - welp! } try? audioEngine.start() } I've also tried various combinations of: Different audio session modes (.default, .measurement, .voiceChat) Different option combinations (with/without .allowBluetooth, .allowBluetoothA2DP) Setting session.setPreferredInput() both before and after activation Diagnostic Observations When AirPods are connected: AVAudioSession.currentRoute.inputs correctly shows "Built-in Microphone" after setPreferredInput() The actual audio data received shows clear signs of AirPods' voice isolation processing Background/environmental sounds are actively filtered out... When recording a test audio played near the phone (not through the app), the recording is nearly silent. Only headset voice goes through. Questions Is there a workaround to force iOS to actually use the built-in microphone while maintaining Bluetooth output? Are there any lower-level configurations that might resolve this issue? Any insights, workarounds, or suggestions would be greatly appreciated. This is blocking a critical feature in my application that requires environmental audio recording while providing audio feedback through headphones 😅