I'd like to find out: Can backgrounded apps record audio? In the past as I recall, I found that backgrounded apps were pretty restricted and couldn't do much of anything. However I'm not familiar with the current state of affairs. With iOS 15.8 and above, can backgrounded apps record audio if they've been given permission by the user to access the microphone? Thanks.

Hey there, I just upgraded to Mac OS Tahoe ,son an apple MacBook Pro 2019 16inch. am using IntellijIDEA and Flutter to develop a mobile app which I test on the simulator app running iOS 18.4 . the issue: when I start the simulator app. ( while in the loading phase and in the operation phase as well ), the audio from an already open YouTube tab on safari (this happens on chrome browser as well). the sound glitches and becomes Noise. a fix I found online is to kill the audio deamon on Mac OS, This works using the command: "sudo killall coreaudiod" this kills the audio process, (while the emulator is operational), then the macOS restarts the audio deamon then the audio works fine alongside with the simulator being open. I just want to ask is there a permanent fix for this? is Apple working on a fix for this in the upcoming update?

I'm encountering errors while using AVAudioEngine with voice processing enabled (setVoiceProcessingEnabled(true)) in scenarios where the input and output audio devices are not the same. This issue arises specifically with mismatched devices, preventing the application from functioning as expected. Works: Paired devices (e.g., MacBook Pro mic → MacBook Pro speakers) Fails: Mismatched devices (e.g., AirPods mic → MacBook Pro speakers) When using paired input and output devices: The setup works as expected. Example: MacBook Pro microphone → MacBook Pro speakers. When using mismatched devices: AVAudioEngine setup fails during aggregate device construction. Example: AirPods microphone → MacBook Pro speakers. Error logs indicate a channel count mismatch. Here are the partial logs. Due to the content limit, I cannot post the entire logs. AUVPAggregate.cpp:1000 client-side input and output formats do not match (err=-10875) AUVPAggregate.cpp:1036 err=-10875 AVAEInternal.h:109 [AVAudioEngineGraph.mm:1344:Initialize: (err = PerformCommand(*outputNode, kAUInitialize, NULL, 0)): error -10875 AggregateDevice.mm:329 Failed expectation of constructed aggregate (312): mInput.streamChannelCounts == inputStreamChannelCounts AggregateDevice.mm:331 Failed expectation of constructed aggregate (312): mInput.totalChannelCount == std::accumulate(inputStreamChannelCounts.begin(), inputStreamChannelCounts.end(), 0U) AggregateDevice.mm:182 error fetching default pair AggregateDevice.mm:329 Failed expectation of constructed aggregate (336): mInput.streamChannelCounts == inputStreamChannelCounts AggregateDevice.mm:331 Failed expectation of constructed aggregate (336): mInput.totalChannelCount == std::accumulate(inputStreamChannelCounts.begin(), inputStreamChannelCounts.end(), 0U) AUHAL.cpp:1782 ca_verify_noerr: [AudioDeviceSetProperty(mDeviceID, NULL, 0, isInput, kAudioDevicePropertyIOProcStreamUsage, theSize, theStreamUsage), 560227702] AudioHardware-mac-imp.cpp:3484 AudioDeviceSetProperty: no device with given ID AUHAL.cpp:1782 ca_verify_noerr: [AudioDeviceSetProperty(mDeviceID, NULL, 0, isInput, kAudioDevicePropertyIOProcStreamUsage, theSize, theStreamUsage), 560227702] AggregateDevice.mm:182 error fetching default pair AggregateDevice.mm:329 Failed expectation of constructed aggregate (348): mInput.streamChannelCounts == inputStreamChannelCounts AggregateDevice.mm:331 Failed expectation of constructed aggregate (348): mInput.totalChannelCount == std::accumulate(inputStreamChannelCounts.begin(), inputStreamChannelCounts.end(), 0U) Is it possible to use voice processing with different input/output devices? If yes, are there any specific configurations required to handle mismatched devices? How can we resolve channel count mismatch errors during aggregate device construction? Are there settings or API adjustments to enforce compatibility between input/output devices? Are there any workarounds or alternative approaches to achieve voice processing functionality with mismatched devices? For instance, can we force an intermediate channel configuration or downmix input/output formats?

Hello, Starting in iOS 17, our application started having some issue publishing to our video session. More specifically the video capture seems to be broken in some, but not all sessions. What's troubling is that we're seeing that it fails consistently every 4 sessions. It also fails silently, without reporting any problems to the app. We only notice that there are no frames being rendered or sent to the remote devices. Here's what shows-up in the console: <<<< FigCaptureSourceRemote >>>> Fig assert: "! storage->connectionDied" at bail (FigCaptureSourceRemote.m:235) - (err=0) <<<< FigCaptureSourceRemote >>>> Fig assert: "err == 0 " at bail (FigCaptureSourceRemote.m:253) - (err=-16453) Anyone seeing this? Any idea what could be the cause? Our sessions work perfectly on iOS16 and below. Thanks

We require assistance in resolving a critical audio design conflict within our Push-to-Talk (PTT) application. Our current volume amplification strategy—which relies on applying a GAIN factor to PCM samples in conjunction with setting the AVAudioSession category to Playback—is working successfully when PTT is used independently. However, upon integrating and reporting the same PTT call through the CallKit framework, this amplification effect is lost. The CallKit integration appears to be forcing a different, non-amplifying audio session category or configuration, negatively impacting the user's perceived call volume. We need guidance on how to maintain the AVAudioSessionCategoryPlayback setting, or an equivalent high-volume configuration, while operating under the control of CallKit.

I’m using the shared instance of AVAudioSession. After activating it with .setActive(true), I observe the outputVolume, and it correctly reports the device’s volume. However, after deactivating the session using .setActive(false), changing the volume, and then reactivating it again, the outputVolume returns the previous volume (before deactivation), not the current device volume. The correct volume is only reported after the user manually changes it again using physical buttons or Control Center, which triggers the observer. What I need is a way to retrieve the actual current device volume immediately after reactivating the audio session, even on the second and subsequent activations. Disabling and re-enabling the audio session is essential to how my application functions. I’ve tested this behavior with my colleagues, and the issue is consistently reproducible on iOS 18.0.1, iOS 18.1, iOS 18.3, iOS 18.5 and iOS 18.6.2. On devices running iOS 17.6.1 and iOS 16.0.3, outputVolume correctly reflects the current volume immediately after calling .setActive(true) multiple times.

I am trying to use SpeechTranscriber from Speech framework. Is it possible to use it on Simulator of iOS 26 (Mac OS Tahoe)? Function "supportedLocales" returns an empty array.

Hi, macOS (latest macOS, latest HW, but doesn't matter) seems to prevent CoreMIDI driver logging with standard logging procedures (syslog, unified logging). The only chance to log something is writing to a file at one of the rare write-accessible locations for CoreMIDI. How is this supposed to work? Any hint is highly appreciated. Thanks!

Hi all, I have been quite stumped on this behavior for a little bit now, so thought it best to share here and see if someone more experience with AVAudioEngine / AVAudioSession can weigh in. Right now I have a AVAudioEngine that I am using to perform some voice chat with and give buffers to play. This works perfectly until route changes start to occur, which causes the AVAudioEngine to reset itself, which then causes all players attached to this engine to be stopped. Once a AVPlayerNode gets stopped due to this (but also any other time), all samples that were scheduled to be played then get purged. Where this becomes confusing for me is the completion handler gets called every time regardless of the sound actually being played. Is there a reliable way to know if a sample needs to be rescheduled after a player has been reset? I am not quite sure in my case what my observer of AVAudioEngineConfigurationChange needs to be doing, as this engine only handles output. All input is through a separate engine for simplicity. Currently I am storing a queue of samples as they get sent to the AVPlayerNode for playback, and after that completion checking if the player isPlaying or not. If it's playing I assume that the sound actually was played- and if not then I leave it in the queue and assume that an observer on the route change or the configuration change will realize there are samples in the queue and reset them Thanks for any feedback!

Hi, I have just implemented an Audio Unit v3 host. AgsAudioUnitPlugin *audio_unit_plugin; AVAudioUnitComponentManager *audio_unit_component_manager; NSArray<AVAudioUnitComponent *> *av_component_arr; AudioComponentDescription description; guint i, i_stop; if(!AGS_AUDIO_UNIT_MANAGER(audio_unit_manager)){ return; } audio_unit_component_manager = [AVAudioUnitComponentManager sharedAudioUnitComponentManager]; /* effects */ description = (AudioComponentDescription) {0,}; description.componentType = kAudioUnitType_Effect; av_component_arr = [audio_unit_component_manager componentsMatchingDescription:description]; i_stop = [av_component_arr count]; for(i = 0; i < i_stop; i++){ ags_audio_unit_manager_load_component(audio_unit_manager, (gpointer) av_component_arr[i]); } /* instruments */ description = (AudioComponentDescription) {0,}; description.componentType = kAudioUnitType_MusicDevice; av_component_arr = [audio_unit_component_manager componentsMatchingDescription:description]; i_stop = [av_component_arr count]; for(i = 0; i < i_stop; i++){ ags_audio_unit_manager_load_component(audio_unit_manager, (gpointer) av_component_arr[i]); } But this doesn't show me Audio Unit v2 plugins, why? regards, Joël

Hi, I just started to develop audio unit hosting support in my application. Offline rendering seems to work except that I hear no output, but why? I suspect with the player goes something wrong. I connect to CoreAudio in a different location in the code. Here are some error messages I faced so far: 2025-08-14 19:42:04.132930+0200 com.gsequencer.GSequencer[34358:18611871] [avae] AVAudioEngineGraph.mm:4668 Can't retrieve source node to play sequence because there is no output node! 2025-08-14 19:42:04.151171+0200 com.gsequencer.GSequencer[34358:18611871] [avae] AVAudioEngineGraph.mm:4668 Can't retrieve source node to play sequence because there is no output node! 2025-08-14 19:43:08.344530+0200 com.gsequencer.GSequencer[34358:18614927] AUAudioUnit.mm:1417 Cannot set maximumFramesToRender while render resources allocated. 2025-08-14 19:43:08.346583+0200 com.gsequencer.GSequencer[34358:18614927] [avae] AVAEInternal.h:104 [AVAudioSequencer.mm:121:-[AVAudioSequencer(AVAudioSequencer_Player) startAndReturnError:]: (impl->Start()): error -10852 ** (<unknown>:34358): WARNING **: 19:43:08.346: error during audio sequencer start - -10852 I have implemented an AVAudioEngine based AudioUnit host. Here I instantiate player and effect: /* audio engine */ audio_engine = [[AVAudioEngine alloc] init]; fx_audio_unit_audio->audio_engine = (gpointer) audio_engine; av_format = (AVAudioFormat *) fx_audio_unit_audio->av_format; /* av audio player node */ av_audio_player_node = [[AVAudioPlayerNode alloc] init]; /* av audio unit */ av_audio_unit_effect = [[AVAudioUnitEffect alloc] initWithAudioComponentDescription:[((AVAudioUnitComponent *) AGS_AUDIO_UNIT_PLUGIN(base_plugin)->component) audioComponentDescription]]; av_audio_unit = (AVAudioUnit *) av_audio_unit_effect; fx_audio_unit_audio->av_audio_unit = av_audio_unit; /* audio sequencer */ av_audio_sequencer = [[AVAudioSequencer alloc] initWithAudioEngine:audio_engine]; fx_audio_unit_audio->av_audio_sequencer = (gpointer) av_audio_sequencer; /* output node */ [[AVAudioOutputNode alloc] init]; /* audio player and audio unit */ [audio_engine attachNode:av_audio_player_node]; [audio_engine attachNode:av_audio_unit]; [audio_engine connect:av_audio_player_node to:av_audio_unit format:av_format]; [audio_engine connect:av_audio_unit to:[audio_engine outputNode] format:av_format]; ns_error = NULL; [audio_engine enableManualRenderingMode:AVAudioEngineManualRenderingModeOffline format:av_format maximumFrameCount:buffer_size error:&ns_error]; if(ns_error != NULL && [ns_error code] != noErr){ g_warning("enable manual rendering mode error - %d", [ns_error code]); } ns_error = NULL; [[av_audio_unit AUAudioUnit] allocateRenderResourcesAndReturnError:&ns_error]; if(ns_error != NULL && [ns_error code] != noErr){ g_warning("Audio Unit allocate render resources returned error - ErrorCode %d", [ns_error code]); } Then I render in a dedicated thread. ns_error = NULL; [audio_engine startAndReturnError:&ns_error]; if(ns_error != NULL && [ns_error code] != noErr){ g_warning("error during audio engine start - %d", [ns_error code]); } [av_audio_sequencer prepareToPlay]; ns_error = NULL; [av_audio_sequencer startAndReturnError:&ns_error]; if(ns_error != NULL && [ns_error code] != noErr){ g_warning("error during audio sequencer start - %d", [ns_error code]); } [av_audio_player_node play]; while(is_running){ /* pre sync */ /* IO buffers */ av_output_buffer = (AVAudioPCMBuffer *) scope_data->av_output_buffer; av_input_buffer = (AVAudioPCMBuffer *) scope_data->av_input_buffer; /* fill input buffer */ /* schedule av input buffer */ frame_position = 0; // (gint64) ((note_offset * absolute_delay) + delay_counter) * buffer_size; av_audio_player_node = (AVAudioPlayerNode *) fx_audio_unit_audio->av_audio_player_node; AVAudioTime *av_audio_time = [[AVAudioTime alloc] initWithHostTime:frame_position sampleTime:frame_position atRate:((double) samplerate)]; [av_audio_player_node scheduleBuffer:av_input_buffer atTime:av_audio_time options:0 completionHandler:nil]; /* render */ ns_error = NULL; status = [audio_engine renderOffline:AGS_FX_AUDIO_UNIT_AUDIO_FIXED_BUFFER_SIZE toBuffer:av_output_buffer error:&ns_error]; if(ns_error != NULL && [ns_error code] != noErr){ g_warning("render offline error - %d", [ns_error code]); } } regards, Joël

I started playing which transcription of audio files on macOS today, latest beta of Xcode and latest beta of Tahoe. Transcription itself works really well, but for some reason the majority of the results contain no audioTimeRange. I got 22 single-word results with time ranges, spread out all over total file of 53 minutes. Is there something I can do to improve this? To my understanding, I have followed sample code and instructions very closely, but the SwiftTranscriptionSampleApp and other examples I've seen lead me to believe I should be getting a lot more time ranges than I actually do.

I've filed this as FB21446798 but figured I'd post here too. In the first build of macOS 26.3, playback via ApplicationMusicPlayer is completely broken. When starting playback of anything at all, the console shows the following error: applicationController: xpc service connection interrupted Failed to obtain remoteObject: Error Domain=NSCocoaErrorDomain Code=4099 "The connection to service created from an endpoint was invalidated from this process." UserInfo={NSDebugDescription=The connection to service created from an endpoint was invalidated from this process.} Failed to prepareToPlay with error: Error Domain=MPMusicPlayerControllerErrorDomain Code=10 "(null)" UserInfo={NSUnderlyingError=0xc92910ff0 {Error Domain=NSCocoaErrorDomain Code=4099 "The connection to service created from an endpoint was invalidated from this process." UserInfo={NSDebugDescription=The connection to service created from an endpoint was invalidated from this process.}}} In addition, several crash logs for RemotePlayerService are generated, showing my app as the parent process. This issue is 100% repeatable. No matter how I load the queue, whether it’s catalog or library content, any variation I can think of all fails like this. I really hope this can be fixed before 26.3 comes out, otherwise my app will be totally unusable. 😅

I am trying to debug the AAX version of my plugin (MIDI effect) on Pro Tools, but I am getting the following error (Mac console) when attempting to load it: dlsym cannot find symbol g_dwILResult in CFBundle etc.. I used Xcode 16.4 to build the plugin. Has anybody come across the same or a similar message? Best, Achillefs Axart Labs

[Note: this issue was happening on a main testing device, and after testing the same code on other devices, this issue is only happening on 1 out of 4 devices] We are successfully getting a MusicCatalogResourceResponse for every song ID where we make the MusicCatalogResourceRequest. We are able to display the song title, artist name, and album artwork for each Song in the response. However - when we go to play the song, there are some songs that play, and several songs that do not play. For the songs that don't play, the console shows “Failed to prepareToPlay error=<MPMusicPlayerControllerErrorDomain.6 "Failed to prepare to play" {}>” let musicPlayer = ApplicationMusicPlayer.shared func playSong(_ song: Song) { musicPlayer.queue = [song] Task { try await musicPlayer.prepareToPlay() try await musicPlayer.play() } Is there anything else we can investigate about what may be causing specific song IDs not to play on this specific device? Even if we remove line 6 musicPlayer.prepareToPlay() we still see the same console error when running playSong with the Songs that don't work. It is always the same song IDs that we can play and always the same song IDs that we cannot get to play, even trying them across different projects with different bundle identifiers. We can tap to play a song that works, and it starts playing immediately. Then tap a song that doesn't work, and nothing happens. Then back to a song that works. It's consistent which songs succeed and fail on this device. Perhaps there is an issue specific to this very iPad when it comes to certain specific songs, but we'd like to be confident that an app relying on MusicKit will be able to play songs that have been successfully loaded with a MusicCatalogResourceResponse. Thanks for any help or suggestions about what we may be able to investigate further on the device or what we should consider when launching an app that expects anyone with Apple Music to be able to listen to any of the songs loaded by the app. Specific iPad details: iPad Pro (12.9-inch) (6th generation) running iPadOS 26.4 Beta Two of the song IDs that won't play on this iPad (even though we can access and display their album artwork and all other information): 943204000 and 1441164805

When using the [AVAudioSession setCategory:withOptions:error:] API, the call hangs for a long time and eventually returns an error.This issue occurs on iOS 16, and did not appear in earlier versions. Thread 135: 0 libsystem_kernel.dylib 0x00000002478e3cd4 _mach_msg2_trap :8 (in libsystem_kernel.dylib) 1 libsystem_kernel.dylib 0x00000002478e7214 _mach_msg_overwrite :428 (in libsystem_kernel.dylib) 2 libsystem_kernel.dylib 0x00000002478e705c _mach_msg :24 (in libsystem_kernel.dylib) 3 libdispatch.dylib 0x00000001d63ffe84 __dispatch_mach_send_and_wait_for_reply :548 (in libdispatch.dylib) 4 libdispatch.dylib 0x00000001d6400224 _dispatch_mach_send_with_result_and_wait_for_reply :60 (in libdispatch.dylib) 5 libxpc.dylib 0x00000001b2114e04 _xpc_connection_send_message_with_reply_sync :256 (in libxpc.dylib) 6 Foundation 0x000000019b6249f0 ___NSXPCCONNECTION_IS_WAITING_FOR_A_SYNCHRONOUS_REPLY__ :16 (in Foundation) 7 Foundation 0x000000019c06d1b4 -[NSXPCConnection _sendInvocation:orArguments:count:methodSignature:selector:withProxy:] :2100 (in Foundation) 8 CoreFoundation 0x000000019dfcb1cc ____forwarding___ :1072 (in CoreFoundation) 9 CoreFoundation 0x000000019dfd3200 ___forwarding_prep_0___ :96 (in CoreFoundation) 10 AudioSession 0x00000001c77498b0 __ZN4avas6client11SessionCore10HandlePingEv :192 (in AudioSession) 11 AudioSession 0x00000001c77497b0 ____ZN4avas6client11SessionCore12DispatchPingEv_block_invoke :52 (in AudioSession) 12 libdispatch.dylib 0x00000001d63e4adc __dispatch_call_block_and_release :32 (in libdispatch.dylib) 13 libdispatch.dylib 0x00000001d63fe7ec __dispatch_client_callout :16 (in libdispatch.dylib) 14 libdispatch.dylib 0x00000001d63ed468 __dispatch_lane_serial_drain :740 (in libdispatch.dylib) 15 libdispatch.dylib 0x00000001d63edf78 __dispatch_lane_invoke :440 (in libdispatch.dylib) 16 libdispatch.dylib 0x00000001d63f6f48 __dispatch_root_queue_drain :364 (in libdispatch.dylib) 17 libdispatch.dylib 0x00000001d63f6d08 __dispatch_worker_thread :268 (in libdispatch.dylib) 18 libsystem_pthread.dylib 0x00000001f9ff144c __pthread_start :136 (in libsystem_pthread.dylib) 19 libsystem_pthread.dylib 0x00000001f9fed8cc _thread_start :8 (in libsystem_pthread.dylib) Thread 132: 0 libsystem_kernel.dylib 0x00000002478e3cd4 _mach_msg2_trap :8 (in libsystem_kernel.dylib) 1 libsystem_kernel.dylib 0x00000002478e7214 _mach_msg_overwrite :428 (in libsystem_kernel.dylib) 2 libsystem_kernel.dylib 0x00000002478e705c _mach_msg :24 (in libsystem_kernel.dylib) 3 libdispatch.dylib 0x00000001d63ffe84 __dispatch_mach_send_and_wait_for_reply :548 (in libdispatch.dylib) 4 libdispatch.dylib 0x00000001d6400224 _dispatch_mach_send_with_result_and_wait_for_reply :60 (in libdispatch.dylib) 5 libxpc.dylib 0x00000001b2114e04 _xpc_connection_send_message_with_reply_sync :256 (in libxpc.dylib) 6 Foundation 0x000000019b6249f0 ___NSXPCCONNECTION_IS_WAITING_FOR_A_SYNCHRONOUS_REPLY__ :16 (in Foundation) 7 Foundation 0x000000019c06d1b4 -[NSXPCConnection _sendInvocation:orArguments:count:methodSignature:selector:withProxy:] :2100 (in Foundation) 8 CoreFoundation 0x000000019dfcb1cc ____forwarding___ :1072 (in CoreFoundation) 9 CoreFoundation 0x000000019dfd3200 ___forwarding_prep_0___ :96 (in CoreFoundation) 10 AudioSession 0x00000001c7754198 __ZNK4avas6client11SessionCore18SetBatchPropertiesEP12NSDictionaryIP8NSStringPU25objcproto14NSSecureCoding11objc_objectEPU15__autoreleasingP7NSArrayIPS2_IS4_P8NSNumberEENS_30AVAudioSessionBatchSetStrategyEbb :548 (in AudioSession) 11 AudioSession 0x00000001c7753e58 __ZNK4avas6client11SessionCore20SetBatchPropertiesMXEP12NSDictionaryIP8NSStringPU25objcproto14NSSecureCoding11objc_objectE :92 (in AudioSession) 12 AudioSession 0x00000001c775179c __ZN4avas6client11SessionCore11setCategoryEP8NSStringS3_32AVAudioSessionRouteSharingPolicym :472 (in AudioSession) 13 AudioSession 0x00000001c7768f88 -[AVAudioSession setCategory:withOptions:error:] :68 (in AudioSession) 14 AlipayWallet 0x000000010140580c -[AVAudioSession(APMHook) apmhook_setCategory:withOptions:error:] APMHookAudioSession.m:35 (in AlipayWallet) 15 AlipayWallet 0x00000001014001a4 -[APMAudioSessionManager resume] APMAudioSessionManager.m:718 (in AlipayWallet) 16 libdispatch.dylib 0x00000001d63e4adc __dispatch_call_block_and_release :32 (in libdispatch.dylib) 17 libdispatch.dylib 0x00000001d63fe7ec __dispatch_client_callout :16 (in libdispatch.dylib) 18 libdispatch.dylib 0x00000001d63ed468 __dispatch_lane_serial_drain :740 (in libdispatch.dylib) 19 libdispatch.dylib 0x00000001d63edf44 __dispatch_lane_invoke :388 (in libdispatch.dylib) 20 libdispatch.dylib 0x00000001d63f83ec __dispatch_root_queue_drain_deferred_wlh :292 (in libdispatch.dylib) 21 libdispatch.dylib 0x00000001d63f7ce4 __dispatch_workloop_worker_thread :692 (in libdispatch.dylib) 22 libsystem_pthread.dylib 0x00000001f9fee3b8 __pthread_wqthread :292 (in libsystem_pthread.dylib) 23 libsystem_pthread.dylib 0x00000001f9fed8c0 _start_wqthread :8 (in libsystem_pthread.dylib)

Hello Apple Developer Community, I am seeking clarification on the intended display behavior of HLS audio tracks within the iOS 26 (or current beta) native player, specifically concerning the NAME and LANGUAGE attributes of the EXT-X-MEDIA tag. In our HLS manifests, we define alternative audio tracks using EXT-X-MEDIA tags, like so: #EXT-X-MEDIA:TYPE=AUDIO,GROUP-ID="audio",LANGUAGE="ja",NAME="AUDIO-1",DEFAULT=YES,AUTOSELECT=YES,URI="audio_ja.m3u8" #EXT-X-MEDIA:TYPE=AUDIO,GROUP-ID="audio",LANGUAGE="ja",NAME="AUDIO-2",URI="audio_en.m3u8" Our observation is that when an audio track is selected and its name is displayed in the native iOS media controls (e.g., Control Center or within a full-screen video player's UI), the value specified in the NAME attribute ("AUDIO-1", "AUDIO-2") does not seem to be used. Instead, the display appears to derive from the LANGUAGE attribute ("ja", "en"), often showing the system's localized string for that language (e.g., "Japanese", "English"). We would like to understand the official or intended behavior regarding this. Is it the expected behavior for the iOS native player to prioritize the LANGUAGE attribute (or its localized equivalent) over the NAME attribute for displaying the selected audio track's label? If this is the intended design, what is the recommended best practice for developers who wish to present a custom, human-readable name for audio tracks (beyond the standard language name) in the native iOS UI? Are there any specific AVPlayer properties or AVMediaSelectionOption considerations that would allow more granular control over this display, or is this entirely managed by the system based on the LANGUAGE attribute? Any insights or official guidance on this behavior in iOS 26 (and potentially previous versions) would be greatly appreciated. Thank you for your time and assistance.

So, I've been wondering how fast a an offline STT -> ML Prompt -> TTS roundtrip would be. Interestingly, for many tests, the SpeechTranscriber (STT) takes the bulk of the time, compared to generating a FoundationModel response and creating the Audio using TTS. E.g. InteractionStatistics: - listeningStarted: 21:24:23 4480 2423 - timeTillFirstAboveNoiseFloor: 01.794 - timeTillLastNoiseAboveFloor: 02.383 - timeTillFirstSpeechDetected: 02.399 - timeTillTranscriptFinalized: 04.510 - timeTillFirstMLModelResponse: 04.938 - timeTillMLModelResponse: 05.379 - timeTillTTSStarted: 04.962 - timeTillTTSFinished: 11.016 - speechLength: 06.054 - timeToResponse: 02.578 - transcript: This is a test. - mlModelResponse: Sure! I'm ready to help with your test. What do you need help with? Here, between my audio input ending and the Text-2-Speech starting top play (using AVSpeechUtterance) the total response time was 2.5s. Of that time, it took the SpeechAnalyzer 2.1s to get the transcript finalized, FoundationModel only took 0.4s to respond (and TTS started playing nearly instantly). I'm already using reportingOptions: [.volatileResults, .fastResults] so it's probably as fast as possible right now? I'm just surprised the STT takes so much longer compared to the other parts (all being CoreML based, aren't they?)

I have some tried-and-tested code that records and plays back audio via AUHAL which breaks on Tahoe on Intel. The same code works fine on Sequioa and also works on Tahoe on Apple Silicon. To start with something simple, the following code to request access to the Microphone doesn't work as it should: bool RequestMicrophoneAccess () { __block AVAuthorizationStatus status = [AVCaptureDevice authorizationStatusForMediaType: AVMediaTypeAudio]; if (status == AVAuthorizationStatusAuthorized) return true; __block bool done = false; [AVCaptureDevice requestAccessForMediaType: AVMediaTypeAudio completionHandler: ^ (BOOL granted) { status = (granted) ? AVAuthorizationStatusAuthorized : AVAuthorizationStatusDenied; done = true; }]; while (!done) CFRunLoopRunInMode (kCFRunLoopDefaultMode, 2.0, true); return status == AVAuthorizationStatusAuthorized; } On Tahoe on Intel, the code runs to completion but granted is always returned as NO. Tellingly, the popup to ask the user to grant microphone access is never displayed, even though the app is not present in the Privacy pane and never appears there. On Apple Silicon, everything works fine. There are some other problems, but I'm hoping they have a common underlying cause and that the Apple guys can figure out what's wrong from the information in this post. I'd be happy to test any potential fix. Thanks.

Hi, I am trying to remove the audio controls for my app on the lock screen. Since I use WKWebView, there are 3 audio tags in my html and I play and pause em via JS. However, if I do not play any sound since app launch, there are no audio controls on the lock screen. But if I play one of those 3 files (they are even less then 3 Sec sound effects e.g. for buttons) the audio controls appears on lock screen. Note even when the sounds on pause() or not playing they were listed on the lock screen. What I have tried so far without success MPNowPlayingInfoCenter.default().nowPlayingInfo = [:] and ``try audioSession.setCategory(.playback, mode: .default, options: []) try audioSession.setActive(false, options: .notifyOthersOnDeactivation)`` and UIApplication.shared.endReceivingRemoteControlEvents() Another problem is that the app scales with iOS system settings "display zoom". Is there a way to deny it? It is latest Xcode verion 16.3 and iOS 18. I have no background mode in my Capabilities. Nothing worked so far. Has anyone an idea? Greetings