I'm using .glassEffect(.clear) on a transparent circle over a gradient background. While it's closer to clear than the plain glass effect, it't not really clear, like clear glass. Here is the code. Is there a glass effect that really looks like clear glass? Circle() .fill(.clear) .frame(width: 180, height: 180) .glassEffect(.clear)

I'm programming my constraints in my video game, which is working good so far until I ran into my most important interactive storyboard. I have three buttons that move back and forth on the Y position each time they are hit. The buttons Y positions only change to view.safeAreaLayoutGuide.centerYAnchor, constant: 100 or view.safeAreaLayoutGuide.centerYAnchor, constant: 200 or view.safeAreaLayoutGuide.centerYAnchor, constant: 300 The strange part is the button that is in the Y 100 stays visible and I can hit the button that is in the Y 100. The buttons in the Y 200 and Y 300 positions are visible until after one or two hits, then the button that is in Y 300 position disappears, then after another hit or two the button that is in the Y 200 position disappears but the button that is in the Y 100 is still visible. I cleared all my constraints to narrow it down to clear view of the constraints that is causing the problem. I do not think this Log Noise. Below is the error log: load_eligibility_plist: Failed to open //private/var/db/os_eligibility/eligibility.plist: Operation not permitted(1) 1 Unable to simultaneously satisfy constraints. Probably at least one of the constraints in the following list is one you don't want. Try this: (1) look at each constraint and try to figure out which you don't expect; (2) find the code that added the unwanted constraint or constraints and fix it. ( "<NSLayoutConstraint:0x302aa7610 UIButton:0x10c257600.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 100 (active)>", "<NSLayoutConstraint:0x302acb480 UIButton:0x10c257600.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 300 (active)>" ) Will attempt to recover by breaking constraint <NSLayoutConstraint:0x302acb480 UIButton:0x10c257600.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 300 (active)> Make a symbolic breakpoint at UIViewAlertForUnsatisfiableConstraints to catch this in the debugger. The methods in the UIConstraintBasedLayoutDebugging category on UIView listed in <UIKitCore/UIView.h> may also be helpful. Unable to simultaneously satisfy constraints. Probably at least one of the constraints in the following list is one you don't want. Try this: (1) look at each constraint and try to figure out which you don't expect; (2) find the code that added the unwanted constraint or constraints and fix it. ( "<NSLayoutConstraint:0x302aa7750 UIButton:0x10c257900.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 200 (active)>", "<NSLayoutConstraint:0x302acb5c0 UIButton:0x10c257900.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 100 (active)>" ) Will attempt to recover by breaking constraint <NSLayoutConstraint:0x302aa7750 UIButton:0x10c257900.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 200 (active)> Make a symbolic breakpoint at UIViewAlertForUnsatisfiableConstraints to catch this in the debugger. The methods in the UIConstraintBasedLayoutDebugging category on UIView listed in <UIKitCore/UIView.h> may also be helpful. Unable to simultaneously satisfy constraints. Probably at least one of the constraints in the following list is one you don't want. Try this: (1) look at each constraint and try to figure out which you don't expect; (2) find the code that added the unwanted constraint or constraints and fix it. ( "<NSLayoutConstraint:0x302aa7890 UIButton:0x10c257c00.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 300 (active)>", "<NSLayoutConstraint:0x302acb700 UIButton:0x10c257c00.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 200 (active)>" ) Will attempt to recover by breaking constraint <NSLayoutConstraint:0x302aa7890 UIButton:0x10c257c00.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 300 (active)> Make a symbolic breakpoint at UIViewAlertForUnsatisfiableConstraints to catch this in the debugger. The methods in the UIConstraintBasedLayoutDebugging category on UIView listed in <UIKitCore/UIView.h> may also be helpful. 3 Unable to simultaneously satisfy constraints. Probably at least one of the constraints in the following list is one you don't want. Try this: (1) look at each constraint and try to figure out which you don't expect; (2) find the code that added the unwanted constraint or constraints and fix it. ( "<NSLayoutConstraint:0x302aa7610 UIButton:0x10c257600.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 100 (active)>", "<NSLayoutConstraint:0x302acb480 UIButton:0x10c257600.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 300 (active)>" ) Will attempt to recover by breaking constraint <NSLayoutConstraint:0x302acb480 UIButton:0x10c257600.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 300 (active)> Make a symbolic breakpoint at UIViewAlertForUnsatisfiableConstraints to catch this in the debugger. The methods in the UIConstraintBasedLayoutDebugging category on UIView listed in <UIKitCore/UIView.h> may also be helpful. Unable to simultaneously satisfy constraints. Probably at least one of the constraints in the following list is one you don't want. Try this: (1) look at each constraint and try to figure out which you don't expect; (2) find the code that added the unwanted constraint or constraints and fix it. ( "<NSLayoutConstraint:0x302aa7750 UIButton:0x10c257900.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 200 (active)>", "<NSLayoutConstraint:0x302acb5c0 UIButton:0x10c257900.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 100 (active)>" ) Will attempt to recover by breaking constraint <NSLayoutConstraint:0x302aa7750 UIButton:0x10c257900.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 200 (active)>

I'm using a NavigationSplitView on macOS which needs to show 2 or 3 columns depending on the selection of the sidebar. Column 1 has a list of main activities. Some of these just have some data to show and some have a sublist. Currently, when an item that has no sublist is selected, I set the 2nd column (content:) to: Spacer() .navigationSplitViewColumnWidth(0) This works, although it started hitting bugs requiring a workaround on macOS 26, which got me wondering, what is the correct approach here? NavigationSplitViewVisibility.doubleColumn is not the solution, as this hides column 1, not column 2.

I've been playing around with the recently published iPad PRO M5 13" and it's awesome in most ways I've been able to think of. But this video capture of the app I'm developing, for example, lacks it the app icon "should" be just slightly translucent as I see it. https://youtube.com/CAukICBrVzw However I'm not and UI/X person and this is primarily my personal preference only for an option to allow for devs.

Hello everyone, In the current iOS version, changes in the "liquid glass" light shining effects can repeatedly be observed on older iPhone devices (12/13/14). This change is often seen after the device is rebooted or after a SystemMemoryReset.ips (System Analysis Data). It changes very often... I'm not currently working on apps myself, but perhaps someone has ideas for the upcoming updates involving Liquid Glass. (please also check the screenshots)

In Apple Music I opened fullscreen for a song and I accidentally clicked some keys and the name and artist name of the song I was playing disappeared, and I can't figure out how to get it back, it temporarily comes back when I hover over the top bar but I can not get it to stay there permanently.

I've been playing around with iPad PRO M5 13" as part of my goal to implement some music relating SPH particle simulation effects on it - and this involves utilizing tap events also from the incredible looking fresh screen the device has. See more information from here, all should be overreactively implemented but the ideas remain (with almost zero cost copy fragment shader) : `https://youtu.be/ci-GSgQ0wlM` This attached image shows the tap effects implementation brought just bit a little further than in the video.

i am struggling to get my tab view to work, when i call views in the action part of my tab view, my background creates issue? does anyone know how to fix this? struct ContentView: View { @Environment(.colorScheme) var colorMode let Color1: Color = .cyan var Color2: Color { colorMode == .dark ? .black : .white } var TextColor: Color{ colorMode == .dark ? .black : .black } let tax: Double = 0.0875 var OptionTypes: [String] = ["Breakfeast", "Lunch", "Dinner", "Dessert", "Drinks"] var BreakfeastFoods: [Food] = [ Food(Name: "Eggs Benedict", Price: 9.50), Food(Name: "Avocado Toast", Price: 5.75), Food(Name: "French Toast", Price: 12.50), Food(Name: "Waffles", Price: 7.25), Food(Name: "Pancakes", Price: 8.60) ] var LunchFoods: [Food] = [ Food(Name: "Tuna Salad", Price: 11.25), Food(Name: "Pizza", Price: 22.50), Food(Name: "Chicken Sandwitch", Price: 8.95), Food(Name: "French Fries", Price: 5.15), Food(Name: "Macaroni and Cheese", Price: 7.50) ] var DinnerFoods: [Food] = [ Food(Name: "Ribeye Steak", Price: 18.99), Food(Name: "Pork Ribs", Price: 21.75), Food(Name: "Salmon", Price: 15.00), Food(Name: "Burrito Bowl", Price: 13.99), Food(Name: "Chicken Fajitas", Price: 20.50) ] var DessertFoods: [Food] = [ Food(Name: "Ice Cream Sundae", Price: 10.00), Food(Name: "Fudge Brownie", Price: 4.85), Food(Name: "Chocolate Cake Slice", Price: 6.10), Food(Name: "Pumpkin Pie", Price: 6.10), Food(Name: "Ice Cream Float", Price: 3.50) ] var Drinks: [Food] = [ Food(Name: "Water", Price: 0.00), Food(Name: "Sparkling Water", Price: 2.15), Food(Name: "Soda", Price: 3.00), Food(Name: "Coffee", Price: 2.50), Food(Name: "Hot Chocolate", Price: 3.50) ] @State var MyCart: [Food] = [] var body: some View { NavigationStack{ ZStack{ LinearGradient(colors: [Color1, Color2], startPoint: .top, endPoint: .bottom).ignoresSafeArea() VStack(spacing: 40){ ForEach(OptionTypes, id: \.self){ OptionType in NavigationLink(value: OptionType){ Text(OptionType) }.frame(width: 250, height: 70).background(LinearGradient(colors: [.cyan, .white,.cyan], startPoint: .topLeading, endPoint: .bottom)).foregroundStyle(TextColor).cornerRadius(100).font(.system(size: 25, weight: .medium)).padding(.top, 16) } }.navigationDestination(for: String.self) { OptionType in switch OptionType{ case "Breakfeast": BreakFeastView(BreakfeastList: BreakfeastFoods, Color1: Color1, Color2: Color2) case "Lunch": LunchView(LunchList: LunchFoods, Color1: Color1, Color2: Color2) case "Dinner": DinnerView(DinnerList: DinnerFoods, Color1: Color1, Color2: Color2) case "Dessert": DessertView(DessertList: DessertFoods, Color1: Color1, Color2: Color2) case "Drinks": DrinksView(DrinksList: Drinks, Color1: Color1, Color2: Color2) // case "My Cart": // MyCartView(MyCartList: MyCart, Color1: Color1, Color2: Color2) default: Text("Error") } } } .navigationTitle("Choose Menu") TabView{ Tab("Menu", systemImage: "fork.knife"){ } Tab("My-Cart", systemImage: "cart.fill"){ } Tab("Store Location", systemImage: "mappin"){ } } } } }

I've been beating my head against the wall over a scrollview issue where the top and bottom are cut off in landscape mode. Portrait mode - everything runs swimmingly. The moment I flip the iPad on its side, though, I lose about a quarter of the view on the top and bottom. I thought this was something to do with framing or such; I ran through a myriad of frame, padding, spacer, geometry...I set it static, I set it to dynamically grow, I even created algorithms to try to figure out how to set things to the individual device. Eventually, I separated the tablet and phone views as was suggested here and on the Apple dev forums. That's when I started playing around with the background image. Right now I have.... ZStack { Image("background") .resizable() .scaledToFill() .ignoresSafeArea() ScrollView { VStack(spacing: 24) {.... The problem is the "scaledToFill". In essence, whenever THAT is in the code, the vertical scrollview goes wonky in landscape mode. It, in essence, thinks that it has much more room at the top and the bottom because the background image has been extended at top and bottom to fill the wider screen of the iPad in landscape orientation. Is there any way to get around this issue? The desired behavior is pretty straightforward - the background image fills the entire background, no white bars or such, and the view scrolls against it.

We're using StoreKit for in-app purchases on iOS, and our backend has the server notification URL configured. However, during subscription renewals, Apple's server doesn't send any requests to our endpoint. What could be causing this?

Hi friends, I need a design and coding team to publish a fintech app. Can anyone help me with this?

I’m working with Reality Composer and noticed that images added directly to a scene appear significantly darker when viewed in AR. This seems different from how other objects in the scene respond to lighting, especially under varying real-world light conditions. Is this expected behavior? Are images treated with a different lighting model in Reality Composer? Is there any recommended way to get more consistent light response for image-based artworks?

I have the June 2025 version, but I'd like to find the 2022. There was something removed from the 2022 that I would like to check out.

Hi, I just had V1.0 of my app approved on the App Store and I immediately noticed that the icon preview is broken. It looks good in Xcode, on-device and also in the App Store link preview. The icon was built with Icon Composer. Here's the difference (left is App store): Has anyone encountered the same issue and found a solution?

Hello everyone, I’m looking for some advice or shared experiences regarding an app rejection under App Store Review Guideline 4.3(b) – Design – Spam. Our app was rejected and, after an appeal to the App Review Board, Apple maintained that the app “duplicates the content and functionality of similar apps in a saturated category.” We strongly disagree with this classification and are struggling to understand how Guideline 4.3(b) has been applied in our case. The app was developed as an original product: Custom-designed content (including original cards and interactions) A unique visual style and UI A distinct interaction flow focused on encouraging social interaction between users This was not a template-based or reskinned app, nor is it part of a series of similar submissions. We fully respect the App Store Review Guidelines and are open to making adjustments to better align with them. However, what we find difficult is the lack of specific, actionable feedback. We have not received clear guidance on which exact elements are considered duplicative or what changes would meaningfully address the concern. Some of the questions we are hoping the community can help with: In your experience, what typically triggers a 4.3(b) rejection in cases like this? Are there specific mechanics, terminology, or presentation choices that reviewers often interpret as problematic? Have others successfully resolved a 4.3(b) rejection without completely abandoning their app concept? We have already invested significant time and resources into this project, and being advised to create an entirely new app is not financially feasible for us. We are genuinely trying to understand how to proceed in a way that is constructive and compliant. Any insights, experiences, or advice would be greatly appreciated. Thank you in advance. — Lars

Hi, I want to generate some sample datas for demonstrating the functions of my app when the app launched. My codes are as followings: func generateSampleData() { let hasLaunchedKey = "HasLaunchedBefore" let defaults = UserDefaults.standard if !defaults.bool(forKey: hasLaunchedKey) { //generate the demo data } defaults.set(true, forKey: hasLaunchedKey) } And I put the func in a view's onAppear modifier. I found every time I go the view, it generates the demo data again, which results in producing a lot of demo data. But I have set the status of the function running in the userdefault. Why did it happen? Best Wishes,

The problem is the same in all of my applications. To reproduce it, in iOS 26, set the dark mode in the Brightness and display settings and in Accessibility, Display and text size, activate Increase contrast and bold text. With these settings, all the controls will be surrounded by a thin white line. When in the app a keyboard is dispayed, the thin white line does not appears correctly around the keyboard like in the capture joined, it is present on top and partially on bottom but not on sides

Hi, It would be sure if Apple creates a Fgima plug in to convert designs to SwiftUI, no one can do it like Apple and it would be SUPER and super time saving ! -- Kind Regards

I am developing an app in Swift Playground (No Xcode). All my Views respond to the navigation call when I click NEXT except one. When I click NEXT the app hangs then crashes. The error message does not identify the cause of the crash. I have research every possible lead with no success. I would like to get some ideas on how to resolve this issue.

I have been battling the new Icon Composer app for 2 days trying to build an app icon. However, I cannot get it to import any files. I have used the Apple provided App Icon Template. I have exported my layers to .svg and when I open the finder, everything is disabled. I can't find help for this anywhere. I am on Sequoia on my Mac and not sure how to design this app icon without access to the composer.