Hi Apple team, We're planning to integrate Tap to Pay on iPhone feature in our product, and found there's a QR code button on the your Figma design: https://www.figma.com/design/2SOXmeLvimllvT67MTMLOy/Tap-to-Pay-on-iPhone--Community-?node-id=0-1&t=E3XskpsLctTuZvg5-1 Questions: is there any official documentation about the QR code button on this screen? What happens when user clicks on QR button? What're the suggestions to show/hide that button, and can we customize it? Thanks.

Hello Apple Developer Support, We initially uploaded our INRx App on a different Apple Developer account for internal testing purposes. Now, we would like to publish the same app under a new Apple Developer account for production, but we're currently facing a design-related rejection during the review process. We believe the app meets all guidelines, and there were no design issues flagged previously when submitted from the testing account. Could you please help us understand: Why the same app is now being rejected for design issues? Is there a way to resolve this while moving the app to the new account? Any advice or clarification would be greatly appreciated so we can successfully proceed with publishing. Thank you!

I am working on a Mac App that was developed with Objective C and Interface Builder. In earlier versions of Mac OS the window title was centered. Now in Tahoe it's left-justified. Is there some way to set this? There is no setting for this in Interface Builder and I can't see any way to do it programmatically by reading the developer documentation. Is this even possible?

I'm programming my constraints in my video game, which is working good so far until I ran into my most important interactive storyboard. I have three buttons that move back and forth on the Y position each time they are hit. The buttons Y positions only change to view.safeAreaLayoutGuide.centerYAnchor, constant: 100 or view.safeAreaLayoutGuide.centerYAnchor, constant: 200 or view.safeAreaLayoutGuide.centerYAnchor, constant: 300 The strange part is the button that is in the Y 100 stays visible and I can hit the button that is in the Y 100. The buttons in the Y 200 and Y 300 positions are visible until after one or two hits, then the button that is in Y 300 position disappears, then after another hit or two the button that is in the Y 200 position disappears but the button that is in the Y 100 is still visible. I cleared all my constraints to narrow it down to clear view of the constraints that is causing the problem. I do not think this Log Noise. Below is the error log: load_eligibility_plist: Failed to open //private/var/db/os_eligibility/eligibility.plist: Operation not permitted(1) 1 Unable to simultaneously satisfy constraints. Probably at least one of the constraints in the following list is one you don't want. Try this: (1) look at each constraint and try to figure out which you don't expect; (2) find the code that added the unwanted constraint or constraints and fix it. ( "<NSLayoutConstraint:0x302aa7610 UIButton:0x10c257600.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 100 (active)>", "<NSLayoutConstraint:0x302acb480 UIButton:0x10c257600.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 300 (active)>" ) Will attempt to recover by breaking constraint <NSLayoutConstraint:0x302acb480 UIButton:0x10c257600.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 300 (active)> Make a symbolic breakpoint at UIViewAlertForUnsatisfiableConstraints to catch this in the debugger. The methods in the UIConstraintBasedLayoutDebugging category on UIView listed in <UIKitCore/UIView.h> may also be helpful. Unable to simultaneously satisfy constraints. Probably at least one of the constraints in the following list is one you don't want. Try this: (1) look at each constraint and try to figure out which you don't expect; (2) find the code that added the unwanted constraint or constraints and fix it. ( "<NSLayoutConstraint:0x302aa7750 UIButton:0x10c257900.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 200 (active)>", "<NSLayoutConstraint:0x302acb5c0 UIButton:0x10c257900.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 100 (active)>" ) Will attempt to recover by breaking constraint <NSLayoutConstraint:0x302aa7750 UIButton:0x10c257900.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 200 (active)> Make a symbolic breakpoint at UIViewAlertForUnsatisfiableConstraints to catch this in the debugger. The methods in the UIConstraintBasedLayoutDebugging category on UIView listed in <UIKitCore/UIView.h> may also be helpful. Unable to simultaneously satisfy constraints. Probably at least one of the constraints in the following list is one you don't want. Try this: (1) look at each constraint and try to figure out which you don't expect; (2) find the code that added the unwanted constraint or constraints and fix it. ( "<NSLayoutConstraint:0x302aa7890 UIButton:0x10c257c00.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 300 (active)>", "<NSLayoutConstraint:0x302acb700 UIButton:0x10c257c00.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 200 (active)>" ) Will attempt to recover by breaking constraint <NSLayoutConstraint:0x302aa7890 UIButton:0x10c257c00.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 300 (active)> Make a symbolic breakpoint at UIViewAlertForUnsatisfiableConstraints to catch this in the debugger. The methods in the UIConstraintBasedLayoutDebugging category on UIView listed in <UIKitCore/UIView.h> may also be helpful. 3 Unable to simultaneously satisfy constraints. Probably at least one of the constraints in the following list is one you don't want. Try this: (1) look at each constraint and try to figure out which you don't expect; (2) find the code that added the unwanted constraint or constraints and fix it. ( "<NSLayoutConstraint:0x302aa7610 UIButton:0x10c257600.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 100 (active)>", "<NSLayoutConstraint:0x302acb480 UIButton:0x10c257600.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 300 (active)>" ) Will attempt to recover by breaking constraint <NSLayoutConstraint:0x302acb480 UIButton:0x10c257600.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 300 (active)> Make a symbolic breakpoint at UIViewAlertForUnsatisfiableConstraints to catch this in the debugger. The methods in the UIConstraintBasedLayoutDebugging category on UIView listed in <UIKitCore/UIView.h> may also be helpful. Unable to simultaneously satisfy constraints. Probably at least one of the constraints in the following list is one you don't want. Try this: (1) look at each constraint and try to figure out which you don't expect; (2) find the code that added the unwanted constraint or constraints and fix it. ( "<NSLayoutConstraint:0x302aa7750 UIButton:0x10c257900.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 200 (active)>", "<NSLayoutConstraint:0x302acb5c0 UIButton:0x10c257900.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 100 (active)>" ) Will attempt to recover by breaking constraint <NSLayoutConstraint:0x302aa7750 UIButton:0x10c257900.centerY == UILayoutGuide:0x3030f0c40'UIViewSafeAreaLayoutGuide'.centerY + 200 (active)>

Hi, Anybody knows will this occurs when using navigationStack at iOS 18.3? The navigationStack not stay at safeareas the code as simple as that: NavigationStack(path: $navManager.path) { VStack { Text("Hello") } .navigationDestination(for: Route.self) { route in switch route { .... } } } .environmentObject(navManager) .environment(logic)

Is it possible to use the new variable draw feature for a custom SF Symbol without it leaving the background behind it when it is not drawn? I am trying to make a tally icon that is drawn with the variable draw, but it doesn't look good if the tally is visible in the background before it is drawn.

ปุ่ม ฝ เอาไปสลับกะปุ่ม backspace น่าจะใช้สะดวกขึ้น

Showing Recent Errors Only Prepare build error: Multiple commands produce '/Users/mayankjain/Library/Developer/Xcode/DerivedData/PCS_EmpApp-chsylqbxjptobeawzzckymqzagvr/Build/Products/Debug-iphonesimulator/PCS_EmpApp.app/Info.plist' note: Target 'PCS_EmpApp' (project 'PCS_EmpApp') has copy command from '/Users/mayankjain/Documents/05-NOV-2025-SWETA_IOS/PCS_EmpApp/PCS_EmpApp/xcode-out/Platforms/iOS/Info.plist' to '/Users/mayankjain/Library/Developer/Xcode/DerivedData/PCS_EmpApp-chsylqbxjptobeawzzckymqzagvr/Build/Products/Debug-iphonesimulator/PCS_EmpApp.app/Info.plist' note: Target 'PCS_EmpApp' (project 'PCS_EmpApp') has process command with output '/Users/mayankjain/Library/Developer/Xcode/DerivedData/PCS_EmpApp-chsylqbxjptobeawzzckymqzagvr/Build/Products/Debug-iphonesimulator/PCS_EmpApp.app/Info.plist' Multiple commands produce '/Users/mayankjain/Library/Developer/Xcode/DerivedData/PCS_EmpApp-chsylqbxjptobeawzzckymqzagvr/Build/Products/Debug-iphonesimulator/PCS_EmpApp.app/Info.plist'

Hello, I am looking to develop a relationship with a developer that has experience running through the IOS build approval process. To elaborate, my team and I have designed and built a software application which is working through the Apple Developer review process to have the app approved and released to the App Store. Unfortunately, there has been some challenges, simple challenges in my eyes with our interface preventing Apple from approving our application. Happy to elaborate further. A primary problem and solution I have seen is the software build was testing solely on the iPhone but as recently directed it seem the application must be accessible on iPad as well. With this the case, I have experience some software platforms where on the ipad the interface is not displayed on the whole screen. I am looking for direction on how to implement this setup for the 1st IOS build. Another concern from Apples Developer Review team is the App Tracking Transparency kit may need to be implemented.

I’m working on a SwiftUI sheet that has a specific size 624 x 746, but I’m running into issues on certain devices like the iPad mini in landscape or when using Stage Manager. The sheet sometimes gets cut off, and the content inside isn’t fully visible. Current Implementation: The sheet is 624 x 746, but if there's less width or height around the sheet, I want it to scale dynamically while maintaining the aspect ratio (to ensure the content can always be shown) Ideally, I’d love for the sheet to increase in size on larger screens to cover more of the page behind it. The sheet contains a NavigationStack with multiple pages. Problems I’m Facing: iPad mini (landscape): The bottom content (like buttons) gets cut off when the sheet height is constrained. Stage Manager: If the user resizes the window, the sheet doesn’t adjust properly, leading to UI clipping. Ideal behavior: I want the sheet to dynamically scale its width and height while maintaining the aspect ratio. Questions How can I prevent content from being cut off when using the sheet in iPad mini landscape? Is there a better approach to handle Stage Manager resizing dynamically? Any insights or alternative approaches would be greatly appreciated! 🚀 Also, I’m a designer, and I’m doing this to help our development team—so please bear with my code 😅 Thanks in advance! 😊

I am struggling with exactly how to set up SwiftData relationships, beyond the single relationship model... Let's say I have a school. Each school offers a set of classes. Each class is taught by one teacher and attended by several students. Teachers may teach more than one class, but only at one school. Similarly students may attend more than one class, but only at one school. Classes themselves may be offered at more than one school. Can someone create a class for School, SchoolClass, Teacher, and Student with id, name, and relationships... I have tried it unsuccessfully about 10 different ways at this point. My most recent is below... I am struggling getting beyond a school listing in the app, and I'll cross that bridge next. I am just wondering if all the trouble I am having is because I am not smart with the class definitions. And wondering if this is to complex for SwiftData and CoreData is the requirement. This is not a real app, just my way of really trying to get a handle on Swift Data models and Navigation. I am very new to Swift, and will take any and all suggestions with enthusiasm! Thanks for taking the time. import Foundation import SwiftData @Model class School: Identifiable { var id: UUID = UUID() var name: String var mascot: String var teachers: [Teacher] var schoolClasses: [SchoolClass] init (name: String, mascot: String = "", teachers: [Teacher] = [], schoolClasses: [SchoolClass] = []) { self.name = name self.mascot = mascot self.teachers = teachers } class SchoolClass: Identifiable { var id: UUID = UUID() var name: String var teacher: Teacher? var students: [Student] = [] init (name: String, teacher: Teacher? = nil, students: [Student] = []) { self.name = name self.teacher = teacher self.students = students } } class Teacher: Identifiable { var id: UUID = UUID() var name: String var tenured: Bool var school: School? var students: [Student] = [] init (name: String, tenured: Bool = false, students: [Student] = []) { self.name = name self.tenured = tenured self.students = students } } class Student: Identifiable { var id: UUID = UUID() var name: String var grade: Int? var teacher: Teacher? init (name: String, grade: Int? = nil, teacher: Teacher? = nil) { self.name = name self.grade = grade self.teacher = teacher } } }

In the clock app when making an alarm for myself to wake up, I found this bug where If you swipe left On an alarm without deleting it and then Swipe right it does a goofy visual glitch where it teleports to the top of your screen.

我设计了一个可以键盘输入的蓝牙HID设备，被iphone蓝牙连接后，iphone无法弹出系统键盘，我正试图寻求可以通过修改HID设备代码来解决的方案。

Hi everyone, I’m having trouble getting the new glassEffect() modifier to render correctly in SwiftUI. No matter what I try, it just appears as a solid white background (instead of translucent glass). This happens both in Beta 1 and Beta 2. My setup: • Mac mini (M4 chip) • macOS 15 Beta 2 (Tahoe) • Xcode 16 Beta 2 • Samsung Odyssey G9 57” monitor (super ultrawide) • Using Preview in SwiftUI (not the Simulator) Even when I use Apple’s default demo code like: Text("Hello World") .padding() .glassEffect()

I found that unofficial apps like ChatGPT and Shadowrocket can use widgets in VisionOS 26. How is this achieved? How can I also enable widgets for apps I develop?

Hey there! I'd love to know if theres a way where you can animate items between ZStack and VStacks? Just like the native iOS notifications on the Lockscreen stack at the bottom and if tapped, they convert from a Stack to a List - I have a list with items, displayed in a VStack, and I make the list collapsable when swiping down, where the items stack behind eachother with a progresisve reduction in opacity & scale, but I havent figured out a way to animate the items between the list and the stack - where you can visually see items starting to overlap and stack ontop of eachother when collapsing the list.

Hi guys, I've exported pngs for the middle and front images of an icon but I still se this weird shadow on top of the icon. Do anyone knows how to solve this?

Why my app icon doesn't have effect liquid glass on ios26. My team dev still not upgrade to xcode26, so I have to export icon for them. And I don't see the effect like stroke of the detail.

Development environment: Simulator: iOS 26 beta 3 iPhone 16 (for testing) Simulator 2: iPadOS 26 beta 3 iPad Air 13 inch (M3) (for testing) Connected Device: iPadOS 26 beta 3 iPad Pro 11 inch (M4) (for testing) Dev Device: macOS Tahoe 26 beta 3 Macbook Air When using the NavigationSplitView element, the sidebar has a built-in panel toggle button. However, when I click the toggle button to toggle the sidebar section in SwiftUI 26 on both simulator 2 and the connected device, it has a slight animation glitch before going back to normal. What's going on? This is my code for the specific view that has the NavigationSplitView (and all views are connected through TabViews): RecordsPage.swift Here are image references: When I clicked the toggle: After 1~2 seconds: These images are in the state of the panel being hidden.

I use swiftui to build apps on iPhone and iPad. There is no problem with the iPhone app. The game display is fully shown on iPhone. However, for the iPad, the game display is not shown and the screen goes black. I had to tap the button on the upper left side.(looks like a side view button) After that, the game display is only shown in the left side in a very small size. How can I make the game display fully shown in the iPad?