At WWDC25 we launched a new type of Lab event for the developer community - Group Labs. A Group Lab is a panel Q&A designed for a large audience of developers. Group Labs are a unique opportunity for the community to submit questions directly to a panel of Apple engineers and designers. Here are the highlights from the WWDC25 Group Lab for Design. Can you expand on how Liquid Glass helps with navigation and focus in the UI? Liquid Glass clarifies the navigation layer by introducing a single, floating pane that acts as the primary navigation area. Buttons within this pane seamlessly morph as you move between sections, and controls can temporarily lift into the glass surface. While avoiding excessive use of glass (like layering glass on glass), this approach simplifies navigation and strengthens the connection between menus, alerts, and the elements that trigger them. What should I do with customized bars that I might have in my app? Reconsider the content and behavior of customized bars. Evaluate whether you need all the buttons and whether a menu might be a better solution. Instead of relying on background colors or styling, express hierarchy through layout and grouping. This is a good opportunity to adopt the new design language and simplify your interface. What are scroll edge effects, and what options do we have for them? Scroll edge effects enhance legibility in controls by lifting interactive elements and separating them from the background. There are two types: a soft edge effect (a subtle blur) and a hard edge effect (a more defined boundary for high-legibility areas like column sorting). Scroll edge effects are designed to work seamlessly with Liquid Glass, allowing content to feel expansive while ensuring controls and titles remain legible. How can we ensure or improve accessibility using Liquid Glass? Legibility is a priority, and refinements are ongoing throughout the betas. Liquid Glass adapts well to accessibility settings like Reduce Transparency, Increase Contrast, and Reduce Motion. There are two variants of glass: regular glass, designed to be legible by default, and clear glass, used in places like AVKit, which requires more care to ensure legibility. Use color contrast tools to ensure contrast ratios are met. The Human Interface Guidelines (HIG) are a living document offering best practices. The colors and materials pages are key resources. Do you have any recommendations for convincing designers concerned with consistency across Android and Web to use Liquid Glass? Start small and focus on high-utility controls that don't significantly impact brand experience. Native controls offer familiarity and predictability to users. Using the native controls makes sure your app feels at home on the device. Using native frameworks provides built-in accessibility support (dynamic type, reduce transparency, increase contrast). Native controls come with built-in behaviors and interactions. Can ScrollViews include Liquid Glass within them? You can technically put a glass layer inside a scroll view, but it can feel heavy and doesn't align with the system's intention for Liquid Glass to serve as a fixed layer. Think of the content layer as the scrolling layer, and the navigational layer as the one using Liquid Glass. If there is glass on the content layer it will collide into the navigational layer. What core design philosophy guided the direction of iOS 26, beyond the goal of unification? The core design philosophy involved blurring the line between hardware and software, separating UI and navigation elements from content, making apps adaptable across window sizes, and combining playfulness with sophistication. It was about making the UI feel at home on rounded screens. Can we layer Liquid Glass elements on top of each other? Avoid layering Liquid Glass elements directly on top of each other, as it creates unnecessary visual complexity. The system will automatically convert nested glass elements to a vibrant fill style. Use vibrant fills and labels to show control shapes and ensure legibility. Opaque grays should be avoided in favor of vibrant colors, which will multiply with the backgrounds correctly. What will happen to apps that use custom components? Should they be adapted to the new design within the next year? The more native components you use, the more things happen for free. Standard components will be upgraded automatically. Look out for any customizations that might clash. Think about what is the minimum viable change, where your app still feels and looks very similar to what it did. Prioritize changes in core workflows and navigational areas. There are a number of benefits to using native components including user familiarity, built-in accessibility support, and built-in behaviors and interactions. Will Apple be releasing Figma design templates? Sketch kits were published on Monday and can be referenced. The goal is to ensure the resources are well-organized, well-named, and easy to use. It's a high priority.

Hello everyone, In the current iOS version, changes in the "liquid glass" light shining effects can repeatedly be observed on older iPhone devices (12/13/14). This change is often seen after the device is rebooted or after a SystemMemoryReset.ips (System Analysis Data). It changes very often... I'm not currently working on apps myself, but perhaps someone has ideas for the upcoming updates involving Liquid Glass. (please also check the screenshots)

Hello, I used icon composer to create an icon for my Mac OS app and it seemed to have worked. I see the app icon everywhere except for window expose or stage manager. Any help or guidance would be greatly appreciated!

Hi everyone, I'm new to building apps on Swift and recently I've been wondering how does Apple get this blur effect behind the control center on Mac OS Tahoe. I think it would be nice to use in an app that I'm making but I can't seem to find it in the docs. Is it available through AppKit? I would appreciate some help on this

Hello everyone, I'm very impressed with the Liquid Glass design introduced in iOS 26, especially how native app icons automatically adapt to the system's display mode (dark or light). This brings me to a question: Is it possible to make a website shortcut icon created via Safari's "Add to Home Screen" feature adapt to Dark Mode in the same way? For native apps, we can use tools like Icon Composer and asset catalogs (Assets.xcassets) to provide different icons for each mode. It would be a huge improvement for web clips if we could achieve the same with existing web technologies like apple-touch-icon or the Web App Manifest. If anyone has figured out a way to do this, I would greatly appreciate it if you could share your knowledge. Thanks in advance! 日本語の原文： iOS 26から導入されたLiquid Glassデザインについて。 ネイティブアプリのアイコンがシステムの表示モード（ダークモード/ライトモード）に合わせて自動で最適化されるようになりました。 そこで疑問に思ったのですが、Safariから「ホーム画面に追加」機能を使って作成するWebサイトのショートカットアイコンは、ネイティブアプリと同じようにダークモードに対応できないのでしょうか？ ネイティブアプリの場合は、Icon Composerなどのツールでアセットカタログ（Assets.xcassets）を使い、モードごとのアイコンを用意できますよね。 Web側でも、apple-touch-iconやWeb App Manifestといった既存の仕組みを使って、アイコンを動的に切り替えられるようになると、Webクリップの使い勝手がさらに向上すると思うのですが もし、すでに何らかの方法で対応されている方がいらっしゃれば、ぜひその知見を共有していただけると嬉しいです。

hi all, i have dating app, approved in google store, and working website but i cant get approval from apple review team ( Guideline 4.3(b) - Design - Spam) can someone help/suggest how to solve it our app has 2000 clients already

Hi, App Image: What is the best format - jpg, tiff, giff, psd or ai? What is the maximum and minimum number of items the app can contain? Please advise. Thanks

Does iOS 26 support HDR images for app icons to be rendered in High Dynamic Range for Springboard or not?

What is the step-by-step process to run an iOS application paired with the Mac in my MAUI project? I am using Windows with Visual Studio 2022 V17.13.5. Application: Multiplatform; Language: C#; Framework: MAUI 8; Xcode: 16.2; Objective: Identify and fix the issue to allow the application to run correctly.

I couldn't help noticing that the Maps and Find My apps make extensive use of "sheets stacked on top of each other" to represent its navigation hierarchy, with a "new content comes in from the bottom" orientation instead of a navigation stack with "new content comes in from the right side" oriented transitions. I'm interested in this topic because I have a similar navigation-hierarchy-over-a-map case in my app (with a custom map view though) and I'm torn back and forth between the approach of replicating the "stacked sheets" vs. putting a navigation stack in a sheet, esp. with the navstack approach being way more attainable with the iOS 26 glass design. I couldn't find any guidance for this kind of UI in the Human Interface Guidelines; I'm leaning towards the navstack-approach for my app; but in terms of the behavior of the SwiftUI container views in this scenario it seems a little bit of an uphill path. Any thoughts on what pattern should be preferred for presenting a deep navigational hierarchy on top of a map-like view?

I've been beating my head against the wall over a scrollview issue where the top and bottom are cut off in landscape mode. Portrait mode - everything runs swimmingly. The moment I flip the iPad on its side, though, I lose about a quarter of the view on the top and bottom. I thought this was something to do with framing or such; I ran through a myriad of frame, padding, spacer, geometry...I set it static, I set it to dynamically grow, I even created algorithms to try to figure out how to set things to the individual device. Eventually, I separated the tablet and phone views as was suggested here and on the Apple dev forums. That's when I started playing around with the background image. Right now I have.... ZStack { Image("background") .resizable() .scaledToFill() .ignoresSafeArea() ScrollView { VStack(spacing: 24) {.... The problem is the "scaledToFill". In essence, whenever THAT is in the code, the vertical scrollview goes wonky in landscape mode. It, in essence, thinks that it has much more room at the top and the bottom because the background image has been extended at top and bottom to fill the wider screen of the iPad in landscape orientation. Is there any way to get around this issue? The desired behavior is pretty straightforward - the background image fills the entire background, no white bars or such, and the view scrolls against it.

In Apple Vision Pro, I want to implement a HUD page similar to the one in Medivis' SuricalAR product (i.e. the UI is fixed on the screen field of view rather than in space). How should I do it?

Post: In macOS 26 Betas 1–3, the system applied an automatic dark-mode fallback for app icons. This ensured consistency across the Dock and Finder even when developers hadn’t provided dark assets. Since Beta 4, this fallback was removed. As of Beta 7, icons now rely entirely on developer-updated assets. The result is mixed light and dark icons in the Dock, breaking visual consistency and making app recognition slower in dark mode. Observed behavior: • Icons without dark assets are displayed in their original light version. • Some apps (e.g. Final Cut Pro) show a gray border treatment that feels inconsistent with the rest of the UI. • The fallback applied in Betas 1–3 is completely absent. Expected behavior: System should provide a fallback rendering until developers supply proper dark assets, or offer a toggle in System Settings → Appearance (e.g. “Force Dark Icons”). This is still present in Beta 7. Is there any plan to restore the fallback mechanism or provide a user option?

I noticed a discrepancy between the Material specifications for tvOS on the Developer page and the naming in the Design Resources (Sketch files). Which one should we consider authoritative? Apple developer design web page：https://developer.apple.com/design/human-interface-guidelines/materials design resource（sketch）

I'm developing an iPadOS 18+ application that uses a UITabBarController, styled as a sidebar, to serve as the primary navigation interface. This setup includes 20 different tabs, each representing a distinct section of the app. For the user experience, each tab needs to present a master-detail interface, implemented using a UISplitViewController. The goal is to allow users to navigate between tabs via the sidebar, and within each tab, access related content through the split view's list-detail pattern. The Problem: Currently, my implementation involves instantiating a separate UISplitViewController for each tab, resulting in 20 unique split view instances embedded inside the UITabBarController. While this works functionally, it leads to significant memory usage, especially after the user opens each tab at least once. The accumulation of all these instantiated view controllers in memory eventually causes performance degradation or even memory warnings/crashes on lower-end iPads. The Question: What is the best approach to implement this type of architecture without running into memory management issues? Specifically: Is there a way to reuse or lazily load the UISplitViewController instances only when needed? Can we unload or release split view controllers that haven't been used for a while to reduce memory pressure? Would a custom container controller be more appropriate than using UITabBarController in this case? Are there iPadOS 18+ best practices or newer APIs that support this kind of complex multi-tab, multi-split-view structure efficiently? Any advice on how to optimize memory usage while preserving the sidebar navigation and split view layout would be highly appreciated.

Hi, I was trying to use macOS-Sequoia-Production-Templates in Sketch format and when I try to export png icon file of the document template, it always includes grey nontransparent background which I am unable to delete. In contrast, exporting png app icon file from another template has transparent background and exports well. Is it something wrong with the document icon production template? How can I export document png icon file with transparent background?? Thanks

I’m developing an app that includes a navigation bar with a centered title and a single right bar button item. I’ve noticed that when both the navigation bar title and the right bar button item’s title are relatively long, the navigation bar title becomes hidden. This issue only occurs on iOS 26. When running the same code on iOS 18, the layout behaves as expected, with both elements visible. Has anyone else experienced this behavior on iOS 26? Is this a known layout change or a possible bug?

I had, a long time ago (over 10 years) developed an application that is connected to my UPS (for solar panels). Until yet it worked very well, and I didnot have to compute more than making updates of XCode. That was all. But yet I have swiched to the latest value of switch, and it continue to compile, but it does'not work. I am asking to yo in order keeping my app working as previously. As it does not work, which library is replacing Cloudkit.framework ? and which library is replacing InsPersistantContainer.framework ? Have a good day Guy Desbief

We all know that the feature “Always On Display” is available only on pro models. I checked in iPhone 14 Plus, that feature became visible in “Search” menu under “Settings”. If a user types “Displa”, then the search results show “Always On Display” as a result. When I click on that, it navigates inside “Display and Brightness” and we found no toggle for “Always On Display”. So, displaying the same on search result is a big bug which needs immediate attention from Apple. Users are getting confused whether iPhone 14 plus has that feature or not.. **Possible reason: ** I believe Apple releases iPhone OS versions in a single release each time and must be applying any kind of feature flagging to enable / disable a feature in a version or for a model. The feature flagging might not be working with Settings menu’s Search service or the code is not properly modular.

Hi everyone, I’m currently testing iOS 26 on my iPhone as part of the developer program. According to Apple’s documentation and demo materials, a new screenshot animation was introduced in this version. However, when I take a screenshot on my device, the animation remains the same as in previous iOS versions. I’ve double-checked that I’m running the correct build of iOS 26, and I haven’t found any settings that might enable or disable this feature. Is anyone else experiencing the same issue? Could this new animation be device-specific, region-limited, or require additional configuration? Any insight would be appreciated! Thanks in advance, Alonso Rivera

Dear Developer, Is there a way to create a function to search with inside a text without having to be outside all of the messages? In other words, could I go into one of my contact’s texts and then search specifically inside that message as can be done on Android? This would be such an amazing function And make life so much easier. Thank you.