In IOS17 and IOS18, core spotlight can only match app contents by searching for the displayName, but cannot hit the contents by using keywords. Moreover, when matching the app content by searching for the "displayName", it requires inputting four consecutive characters to achieve a match.These issues did not occur in iOS 16. What is the reason for this? Here is my code. func addItemToIndex(_ item: QSpotlightItem) { let attributeSet = CSSearchableItemAttributeSet(contentType: .item) attributeSet.title = item.title attributeSet.displayName = item.title attributeSet.contentDescription = item.contentDescription attributeSet.keywords = item.keywords attributeSet.thumbnailData = item.thumbnailImage attributeSet.contactKeywords = item.keywords attributeSet.supportsNavigation = true let searchableItem = CSSearchableItem(uniqueIdentifier: item.id, domainIdentifier: "xxx", attributeSet: attributeSet) searchableItem.expirationDate = .distantFuture CSSearchableIndex.default().indexSearchableItems([searchableItem]) { error in if let error = error { } else { } } }

I’m integrating the Declared Age Range feature to tailor our app’s experience based on a user’s age range. I’m currently in the testing phase and would like to repeatedly test the consent flow and different outcomes from AgeRangeService.shared.requestAgeRange(...). However, once I go through the consent flow and choose to share, the age-range sharing sheet no longer appears on subsequent attempts—so it’s hard to validate edge cases (e.g., changed gates, declined flow, re-prompt behavior). Could you advise on the recommended way to reset or re-prompt during development? In particular: Is there a supported way to clear per-app consent so the system prompts again? Under what conditions should the “Share Age Range Again” control appear in Settings, and is there an equivalent way to trigger it for testing? Are there best practices for QA (e.g., using Ask First at the system level, testing on real devices vs. Simulator, using a separate bundle ID for dev builds, or other steps)? Any other guidance for validating different requestAgeRange results (e.g., declined/not available) would be appreciated.

Hello Apple Support Team, We are experiencing a performance issue with HTTP/3 in our iOS application during testing. Problem Description: Network requests using HTTP/3 are significantly slower than expected. This issue occurs on both Wi-Fi and 4G networks, with both IPv4 and IPv6. The same setup worked correctly in an earlier experiment. Key Observations: The slowdown disappears when the device uses: · A personal hotspot. · Network Link Conditioner (with no limitations applied). · Internet sharing from a MacBook via USB (where traffic was also inspected with Wireshark without issues). The problem is specific to HTTP/3 and does not occur with HTTP/2. The issue is reproducible on iOS 15, 18.7, and the latest iOS 26 beta. HTTP/3 is confirmed to be active (via assumeHttp3Capable and Alt-Svc header). Crucially, the same backend endpoint works with normal performance on Android devices and using curl with HTTP/3 support from the same network. I've checked the CFNetwork logs in the Console but haven't found any suspicious errors or obvious clues that explain the slowdown. We are using a standard URLSession with basic configuration. Attempted to collect qlog diagnostics by setting the QUIC_LOG_DIRECTORY=~/ tmp environment variable, but the logs were not generated. Question: What could cause HTTP/3 performance to improve only when the device is connected through a hotspot, unrestricted Network Link Conditioner, or USB-tethered connection? The fact that Android and curl work correctly points to an issue specific to the iOS network stack. Are there known conditions or policies (e.g., related to network interface handling, QoS, or specific packet processing) that could lead to this behavior? Additionally, why might the qlog environment variable fail to produce logs, and are there other ways to obtain detailed HTTP/3 diagnostic information from iOS? Any guidance on further diagnostic steps or specific system logs to examine would be greatly appreciated. Thank you for your assistance.

Hello, I think it is quite a common use-case to open the parent app that owns the ShieldActionDelegate when the user selects an action in the Shield. There are only three options available that we can do in response to an action: ShieldActionResponse.none ShieldActionResponse.close ShieldActionResponse.defer It would be great if this new one would be added as well: ShieldActionResponse.openParentApp While finding a workaround for now, the problem is that the ShieldActionDelegate is not a normal app extension. That means, normal tricks do not work to open the parent app from here. For example, UIApplication.shared.open(url) does not work because we can’t access UIApplication from the ShieldActionDelegate unfortunately. NSExtensionContext is also not available in the ShieldActionDelegate unfortunately, so that’s also not possible. There are apps however, that managed to find a workaround, in my research I stumbled across these two: https://apps.apple.com/de/app/applocker-passcode-lock-apps/id1132845904?l=en-GB https://apps.apple.com/us/app/app-lock/id6448239603 Please find a screen recording (gif) attached. Their workaround is 100% what I’m looking for, so there MUST be a way to do so that is compliant with the App Store guidelines (after all, the apps are available on the App Store!). I had documented my feature request more than 2 years ago in this radar as well: FB10393561

We have had a small number of users of our mac app complaining that the app suddenly can't detect their subscription or previous purchase history. These users are not new, and have been using the app successfully for some time. In the app we do this using the following (very standard) code at app startup: let result: VerificationResult<AppTransaction> = try await AppTransaction.shared For those users experiencing the failure, the result is coming back as unverified. So far we've been unable to find the cause or a solution, but it seems to have become worse with the release of macOS 15.4. We've tried resetting, rebooting and reinstalling the app. It's worth adding the (probably obvious) that it's impossible to test or fault-find with this, because we can't replicate the issue in a development environment. Any suggestions gratefully received.

I have an app developed by using the Callkit/Call-Blocking and received feedback from individual users, when using [cxcalldirectorymanager reloadextensionwithidentifier] to write call blocking data, it returned error code 11 with the following contents: errorCode: 11 errorDomain: com.apple.callkit.database.sqlite errorDescription: sqlite3_step for query 'DELETE FROM PhoneNumberBlockingEntry WHERE extension_id =?' returned 11 (11) errorMessage 'database disk image is malformed' I want to know the reasons for this error and how to solve it，Thanks!

Hi, I'm struggling with SwiftData and the components for migration and could really use some guidance. My specific questions are Is it possible to go from an unversioned schema to a versioned schema? Do all @Model classes need to be converted? Is there one VersionedSchema for the entire app that handles all models or one VersionedSchema per model? What is the relationship, if any, between the models given to ModelContainer in a [Schema] and the models in the VersionedSchema in a [any PersistentModel.Type] I have an app in the AppStore. I use SwiftData and have four @Models defined. I was not aware of VersionedSchema when I started, so they are unversioned. I want to update the model and am trying to convert to a VersionedSchema. I've tried various things and can't even get into the migration plan yet. All posts and tutorials that I've come across only deal with one Model, and create a VersionedSchema for that model. I've tried to switch the one Model I want to update, as well as switching them all. Of course I get different errors depending on what configuration I try. It seems like I should have one VersionedSchema for the app since there is the static var models: [any PersistentModel.Type] property. Yet the tutorials I've seen create a TypeNameSchemaV1 to go with the @Model TypeName. Which is correct? An AppNameSchemaV1 which defines four models, or four TypeNameSchemaV1? Any help will be much appreciated

Hi, My iOS app's home screen widget content was implemented to base on the preferred language of my main app (e.g. my app has the following preferred language options with this order English, Japanese, Traditional Chinese, Korean, Simplify Chinese). Say the main app is currently using English as their preferred language, I can change the preferred language in the iOS Settings -> Apps -> My App -> Preferred Language. My widget's content will respect to the preferred language option that I selected with only exception if I switch back to English language and my Widget's content won't get updated. The Main app content is always update with respect to the selected preferred language. My app and widget is working without any issue in iOS 18. Other things that I had discovered during my testing under iOS 26, the "first" language appeared in my preferred language always being the issue (e.g. if the first language is Japanese , once I change to other languages and than switch back to Japanese, my widget content won't respect to this but the main app content are ok). Any one has a similar issues regarding the preferred language?

We have a Share Extension that fails in Photos on macOS when trying to share a JPEG image for the following reason: From the NSItemProvider we get from the NSExtensionItem.attachments, we try to load the image using loadFileRepresentation(forTypeIdentifier: “public.image”, completionHandler: …). This fails for .jpeg images in the library. There seems to be a mismatch in expected and actual file extension internally. Here is the log: Error copying file type public.image. Error: Error Domain=NSItemProviderErrorDomain Code=-1000 "Cannot load representation of type public.jpeg" UserInfo={NSLocalizedDescription=Cannot load representation of type public.jpeg, NSUnderlyingError=0x1527c1a80 {Error Domain=NSItemProviderErrorDomain Code=-1 "Cannot copy file at URL file:///Users/frank/Library/Containers/com.apple.Photos/Data/tmp/TemporaryItems/ShareKit-Exports/7CCFA760-AAC9-42B0-812D-68F051ED1543/F912E593-2BE5-4E70-86AB-7657A40657E5/IMG_3517.jpg." UserInfo={NSLocalizedDescription=Cannot copy file at URL file:///Users/frank/Library/Containers/com.apple.Photos/Data/tmp/TemporaryItems/ShareKit-Exports/7CCFA760-AAC9-42B0-812D-68F051ED1543/F912E593-2BE5-4E70-86AB-7657A40657E5/IMG_3517.jpg., NSUnderlyingError=0x152789670 {Error Domain=NSItemProviderErrorDomain Code=-1 "Cannot create a temporary file. Error: Undefined error: 0" UserInfo={NSLocalizedDescription=Cannot create a temporary file. Error: Undefined error: 0}}}}}``` In the specified folder, there is an image, however, it’s named IMG_3517.jpeg, not IMG_3517.jpg. This seems to be a bug in Photo’s item provider implementation. If we use loadObject(ofClass: URL.self, completionHandler: …) instead, we get the correct .jpeg URL in the completion handler.

I was excited to find out about Wi-Fi Aware in i[Pad]OS 26 and was eager to experiment with it. But after wiping and updating two devices (an iPhone 11 Pro and a 2018 11" iPad Pro) to Beta 1 I found out that neither of them support Wi-Fi Aware 🙁. What current and past iPhone and iPad models support Wi-Fi Aware? And is there a new UIRequiredDeviceCapabilities key for it, to indicate that an app requires a Wi-Fi Aware capable device?

I created an APNs Auth Key in the Apple Developer portal and downloaded it successfully once. Later, due to some issues, I revoked that key. After that, I created a new APNs Auth Key. The download button appears, but when I click it, I get the message: "Auth Key can only be downloaded once. This auth key has already been downloaded." This is incorrect because: The key is newly created in my account. I have tried multiple browsers (Safari, Chrome), private/incognito mode, and even a different laptop. I have no other active APNs Auth Keys in my account. Without this .p8 file, I cannot configure push notifications for my iOS app (using Firebase Cloud Messaging). This is blocking my production release. Has anyone else experienced this? Is there a way to reset or force a fresh APNs Auth Key when this happens?

We are developing an iOS application that is interacting with HTTP APIs that requires us to put a unique UUID (a nonce) as an header on every request (obviously there's more than that, but that's irrilevant to the question here). If the same nonce is sent on two subsequent requests the server returns a 412 error. We should avoid generating this kind of errors as, if repeated, they may be flagged as a malicious activity by the HTTP APIs. We are using URLSession.shared.dataTaskPublisher(for: request) to call the HTTP APIs with request being generated with the unique nonce as an header. On our field tests we are seeing a few cases of the same HTTP request (same nonce) being repeated a few seconds on after the other. Our code has some retry logic only on 401 errors, but that involves a token refresh, and this is not what we are seeing from logs. We were able to replicate this behaviour on our own device using Network Link Conditioner with very bad performance, with XCode's Network inspector attached we can be certain that two HTTP requests with identical headers are actually made automatically, the first request has an "End Reason" of "Retry", the second is "Success" with Status 412. Our questions are: can we disable this behaviour? can we provide a new request for the retry (so that we can update headers)? Thanks, Francesco

Background We sell a suite of iPadOS/macOS apps that share a single auto-renewable subscription using this architecture. Per “Offering a Subscription Across Multiple Apps” we require users to sign in before purchasing so we can propagate the entitlement and avoid duplicate subscriptions across apps. To enforce that sign-in step we plan to turn off Streamlined Purchasing in App Store Connect. Question We also want to distribute subscription offer codes (for promotion, retention, appeasing dissatisfied customers, etc.). After Streamlined Purchasing is turned off, will customers still be able to redeem offer codes outside the app (App Store “Redeem Code” UI or redemption URL)? If outside-app redemption remains possible, it bypasses our sign-in gate and could let the same customer buy the suite twice (once via each app). Is there an approved method to limit offer-code redemption to the in-app flow only, or otherwise prevent such duplicate subscriptions? If no such limitation exists, what best-practice workaround does Apple recommend for multi-app suites that must turn off Streamlined Purchasing yet still wish to use offer codes without duplication risk? Environment StoreKit 2; server-side receipt validation & cross-app entitlement propagation. Apps support the in-app presentCodeRedemptionSheet flow. We expect to use both one-time-use and custom offer codes.

Hey! We're implementing In-App Purchase Subscriptions and we were able to receive "App Store Server Notifications" on our "Sandbox Server URL". But the last event we received 22 hours ago. We are able to verify transactions and finish them, but receive no webhooks. We changed nothing on our server or its configurations but the notifications stoped to come. We consulted the API (https://api.storekit-sandbox.itunes.apple.com/inApps/v1/notifications/history) and it says the same as we see - the last event was 22hrs ago. I checked all the advices from here as well (https://developer.apple.com/forums/thread/805806?answerId=864483022#864483022). Is there any Status page for the Store Kit Sandbox services? Was there any outage? Sincerely, Konstantin

We are currently experiencing a very interesting issue when accessing the location in the background with CLLocationManager. The user has given our app the "whenInUse" permission for locations and in most cases the app provides location updates even when it's in the background. However, when we started to use other navigation apps in the foreground we saw that the func locationManager(_ manager: CLLocationManager, didFailWithError error: Error) method was called with (kCLErrorDomain error 1.). The user hasn't changed the location permission and we saw that locations were delivered once the user opened the app again. I don't see anything in the documentation explaining this issue, but I chatted with other developers that confirm that specific behavior. Am I missing something here?

I'm unable to view Changes or Diff View in the Deploy Schema Changes Dialog due to an Internal Error.

Hi there, My app uses all the Screen Time API's with individual FamilyControls authorization. I've been using the API's for over 2 years (since they came out). In iOS 18 Beta (maybe started in Beta 3?), I've been experiencing random issues. I tracked it down to where it seems like DeviceActivityMonitor extension is more likely to deadlock in iOS 18. To reproduce: when DeviceActivityMonitorExtension.intervalDidEnd gets called, IF you call DeviceActivityCenter.startMonitoring for that SAME DeviceActivityName from the DeviceActivityMonitorExtension , the startMonitoring call deadlocks (if I pause debugger, it does not advance past DeviceActivityCenter.startMonitoring). The bug is reported in FB14664238. It also contains a sample project where you can reproduce this. I also note in the comment section that this is not the only way to encounter this problem. My application code (which is a lot more complicated) seems to deadlock on calling DeviceActivityCenter.activities. As a result, there seems to be an "overall trend" where, due to some changes, DeviceActivityMonitor extension is more likely to deadlock. The steps are not reproducible on iOS 17.6. This is built using Xcode 17.4. Thank you! 🙏

Hi, Apple recently announced DL-TDoA (Downlink TDoA) support on iOS26. This API is currently marked as Beta. We are working on integrating this functionality into our app, already added the APIs and tried to configure a new DL-TDoA session using NIDLTDOAConfiguration (the only parameter it takes is networkIdentifer). The session is configured but automatically invalidated by the OS. When is DL-TDoA expected to be fully supported by phones? Can we expect a detailed documentation or specification explaining how to arrange the session with the DT-Anchors (channel, ranging duration, ...)? Do we need Bluetooth LE connection with the anchors while running DL-TDoA? We already have the 4 DT-Anchors (1 initiator and 3 responders) ready, looking forward to be able to test this new exciting feature and get DL-TDoA measurements to trilaterate the phone position within a map. Regards.

I'm working on a Network Extension using NEDNSProxyProvider to inspect DNS traffic. However, I've run into a couple of issues: DNS Proxy is not capturing traffic when a public DNS (like 8.8.8.8 or 1.1.1.1) is manually configured in the WiFi settings. It seems like the system bypasses the proxy in this case. Is this expected behavior? Is there a way to force DNS traffic through the proxy even if a public DNS is set? Using DNS Proxy and DNS Settings simultaneously doesn't work. Is there a known limitation or a correct way to combine these? How to set DNS or DNSSettings using DNSProxy? import NetworkExtension import SystemExtensions import SwiftUI protocol DNSProxyManagerDelegate { func managerStateDidChange(_ manager: DNSProxyManager) } class DNSProxyManager: NSObject { private let manager = NEDNSProxyManager.shared() var delegate: DNSProxyManagerDelegate? private(set) var isEnabled: Bool = false { didSet { delegate?.managerStateDidChange(self) } } var completion: (() -> Void)? override init() { super.init() self.load() } func toggle() { isEnabled ? disable() : start() } private func start() { let request = OSSystemExtensionRequest .activationRequest(forExtensionWithIdentifier: Constants.extensionBundleID, queue: DispatchQueue.main) request.delegate = self OSSystemExtensionManager.shared.submitRequest(request) log.info("Submitted extension activation request") } private func enable() { update { self.manager.localizedDescription = "DNS Proxy" let proto = NEDNSProxyProviderProtocol() proto.providerBundleIdentifier = Constants.extensionBundleID self.manager.providerProtocol = proto self.manager.isEnabled = true } } private func disable() { update { self.manager.isEnabled = false } } private func remove() { update { self.manager.removeFromPreferences { _ in self.isEnabled = self.manager.isEnabled } } } private func update(_ body: @escaping () -> Void) { self.manager.loadFromPreferences { (error) in if let error = error { log.error("Failed to load DNS manager: \(error)") return } self.manager.saveToPreferences { (error) in if let error = error { return } log.info("Saved DNS manager") self.isEnabled = self.manager.isEnabled } } } private func load() { manager.loadFromPreferences { error in guard error == nil else { return } self.isEnabled = self.manager.isEnabled } } } extension DNSProxyManager: OSSystemExtensionRequestDelegate { func requestNeedsUserApproval(_ request: OSSystemExtensionRequest) { log.info("Extension activation request needs user approval") } func request(_ request: OSSystemExtensionRequest, didFailWithError error: Error) { log.error("Extension activation request failed: \(error)") } func request(_ request: OSSystemExtensionRequest, foundProperties properties: [OSSystemExtensionProperties]) { log.info("Extension activation request found properties: \(properties)") } func request(_ request: OSSystemExtensionRequest, didFinishWithResult result: OSSystemExtensionRequest.Result) { guard result == .completed else { log.error("Unexpected result \(result.description) for system extension request") return } log.info("Extension activation request did finish with result: \(result.description)") enable() } func request(_ request: OSSystemExtensionRequest, actionForReplacingExtension existing: OSSystemExtensionProperties, withExtension ext: OSSystemExtensionProperties) -> OSSystemExtensionRequest.ReplacementAction { log.info("Existing extension willt be replaced: \(existing.bundleIdentifier) -> \(ext.bundleIdentifier)") return .replace } } import NetworkExtension class DNSProxyProvider: NEDNSProxyProvider { var handlers: [String: FlowHandler] = [:] var isReady = false let queue = DispatchQueue(label: "DNSProxyProvider") override func startProxy(options:[String: Any]? = nil, completionHandler: @escaping (Error?) -> Void) { completionHandler(nil) } override func stopProxy(with reason: NEProviderStopReason, completionHandler: @escaping () -> Void) { completionHandler() } override func handleNewUDPFlow(_ flow: NEAppProxyUDPFlow, initialRemoteEndpoint remoteEndpoint: NWEndpoint) -> Bool { let id = shortUUID() handlers[id] = FlowHandler(flow: flow, remoteEndpoint: remoteEndpoint, id: id, delegate: self) return true } override func handleNewFlow(_ flow: NEAppProxyFlow) -> Bool { return false } } class FlowHandler { let id: String let flow: NEAppProxyUDPFlow let remoteEndpoint: NWHostEndpoint let delegate: FlowHandlerDelegate private var connections: [String: RemoteConnection] = [:] private var pendingPacketsByDomain: [String: [(packet: Data, endpoint: NWEndpoint, uniqueID: String, timestamp: Date)]] = [:] private let packetQueue = DispatchQueue(label: "com.flowhandler.packetQueue") init(flow: NEAppProxyUDPFlow, remoteEndpoint: NWEndpoint, id: String, delegate: FlowHandlerDelegate) { log.info("Flow received for \(id) flow: \(String(describing: flow))") self.flow = flow self.remoteEndpoint = remoteEndpoint as! NWHostEndpoint self.id = id self.delegate = delegate defer { start() } } deinit { closeAll(nil) } func start() { flow.open(withLocalEndpoint: flow.localEndpoint as? NWHostEndpoint) { error in if let error = error { self.delegate.flowClosed(self) return } self.readFromFlow() } } func readFromFlow() { self.flow.readDatagrams { packets, endpoint, error in if let error = error { self.closeAll(error) return } guard let packets = packets, let endpoints = endpoint, !packets.isEmpty, !endpoints.isEmpty else { self.closeAll(nil) return } self.processFlowPackets(packets, endpoints) self.readFromFlow() } } } Any insights or suggestions would be greatly appreciated. Thanks!

I have an iOS app with ExtensionFoundation. It runs well on my local device, but when I upload on the AppStore it gets rejected with: Validation failed Invalid Info.plist value. The value of the EXExtensionPointIdentifier key, AsheKube.app.a-Shell.localWebServer, in the Info.plist of “a-Shell.app/Extensions/localWebServer.appex” is invalid. Please refer to the App Extension Programming Guide at https://developer.apple.com/library/content/documentation/General/Conceptual/ExtensibilityPG/Action.html#/apple_ref/doc/uid/TP40014214-CH13-SW1. (ID: ae8dd1dd-8caf-4a48-9651-7a225faed4eb) The Info.plist in my Extension is: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>EXAppExtensionAttributes</key> <dict> <key>EXExtensionPointIdentifier</key> <string>com.example.example-extension</string> </dict> </dict> </plist> so the Info.plist that causes the issue has been automatically generated by Xcode. I can access it as well, and it says: { "BuildMachineOSBuild" => "25A354" "CFBundleDevelopmentRegion" => "en" "CFBundleDisplayName" => "localWebServerExtension" "CFBundleExecutable" => "localWebServer" "CFBundleIdentifier" => "AsheKube.app.a-Shell.localWebServerExtension" "CFBundleInfoDictionaryVersion" => "6.0" "CFBundleName" => "localWebServer" "CFBundlePackageType" => "XPC!" "CFBundleShortVersionString" => "1.0" "CFBundleSupportedPlatforms" => [ 0 => "iPhoneOS" ] "CFBundleVersion" => "1" "DTCompiler" => "com.apple.compilers.llvm.clang.1_0" "DTPlatformBuild" => "23A339" "DTPlatformName" => "iphoneos" "DTPlatformVersion" => "26.0" "DTSDKBuild" => "23A339" "DTSDKName" => "iphoneos26.0" "DTXcode" => "2601" "DTXcodeBuild" => "17A400" "EXAppExtensionAttributes" => { "EXExtensionPointIdentifier" => "AsheKube.app.a-Shell.localWebServer" } "MinimumOSVersion" => "26.0" "NSHumanReadableCopyright" => "Copyright © 2025 AsheKube. All rights reserved." "UIDeviceFamily" => [ 0 => 1 1 => 2 ] "UIRequiredDeviceCapabilities" => [ 0 => "arm64" ] } What should I do to be able to upload on the AppStore?