If I run the following code in didFinishLaunchingWithOptions() UNUserNotificationCenter.current().requestAuthorization(options: [.alert, .badge, .sound]) { granted, error in if granted { DispatchQueue.main.async { application.registerForRemoteNotifications() } } } Then the result is that didRegisterForRemoteNotificationsWithDeviceToken() gets called. However if I change the code to be just: DispatchQueue.main.async { application.registerForRemoteNotifications() } Or as as its already running on main in this scenario, then just application.registerForRemoteNotifications() Then didRegisterForRemoteNotificationsWithDeviceToken() does NOT get called, but also neither does didFailToRegisterForRemoteNotificationsWithError(). Obtaining a push token is supposed to be independent of the user granting notifications permissions, so why am I not observing that behavior? I only observe this behavior when running on hardware, when running on the simulator both forms of the code work. Yet its nothing to do with my phone not being able to contact the Apple servers etc. - if I change the code back and forth back and forth between the two then if 100% works when using requestAuthorization() and 100% doesn't when not using it. There's nothing additional or out of the ordinary with the code, its standard app delete template stuff. Why isn't it getting a push token when requestAuthorization() isn't used? (I've tried adding an async delay to calling registerForRemoteNotifications(), but it made no difference).

Hi all, We’re implementing in-app subscriptions in our iOS app using App Store Server Notifications V2 in the production environment. Everything is generally working well — we receive notifications such as DID_CHANGE_RENEWAL_STATUS, CANCELLATION, etc., and we log all incoming notifications into our own database. However, we've encountered a single case where the INITIAL_BUY notification was not received for a specific user. Interestingly, we did receive the later notifications (DID_CHANGE_RENEWAL_STATUS and CANCELLATION) for that same user. Here is our setup: App Store Server Notifications V2 Notification endpoint is stable and functioning normally (receives and logs other notifications) Notifications are reliably stored in our database The issue occurred only once for one user Environment: Production We've already contacted Apple Developer Support, but were informed that this issue is out of scope for direct support, and were directed to the Developer Forums. Our questions: Under what conditions might the INITIAL_BUY notification fail to be sent or delivered? Is there any known behavior or scenario where Apple may skip the INITIAL_BUY notification? Any recommendations on how to further investigate or verify whether it was sent from Apple’s side? We’ve confirmed that the notification never hit our server (no logs, no DB record), and our system was healthy at the time. Any insight would be greatly appreciated. Thank you!

I have been watching the following moment from wwdc (Design dynamic Live Activities): https://developer.apple.com/videos/play/wwdc2023/10194/?time=728 It suggest that you should 'tick' between multiple live activities of your app: When you want to show multiple sessions for your app going on at once, consider ticking between the display of them to continue to give users an eye on everything that’s going on. How can I tick between them? More specifically how can I do that when my app is in the background?

Having some discussion about when we should clear out a token from our servers. Docs say: Don’t retry notification responses with the error code BadDeviceToken, DeviceTokenNotForTopic, Forbidden, ExpiredToken, Unregistered, or PayloadTooLarge. You can retry with a delay, if you get the error code TooManyRequests. The way I see it is that with the exception of PayloadTooLarge, all other errors means you should remove the token from your server. Either because: The token is no longer good The token is good, but this is just not the right: environment (sandbox vs production) topic (the token is from a different bundle id or developer team) target (app vs live activity appex) Do I have it right? Extra context: when using the "JSON Web Token Validator" tool, a colleague reported that a 410 -Expired token (from couple days back) was still valid today. This raises questions about when tokens should actually be deleted and how these error codes should be interpreted. Also is it possible for the docs to get updated for us to explicitly know if a token should get removed and not leave it for interpretation?

I'm running into an issue during the iOS build process for my app, and I'm hoping someone can point me in the right direction. ❗ The Problem When attempting to archive the app via EAS Build (Expo), the build fails with the following error: `Provisioning profile "HCF_AppStore_ProvisioningProfile" doesn't include the com.apple.developer.push-notifications entitlement. Profile qualification is using entitlement definitions that may be out of date. Connect to network to update.` What I’ve Already Done: Enabled Push Notifications capability for the App ID (com.rsmco.helpcreatefamilies) in the Apple Developer portal. Deleted and regenerated the App Store Provisioning Profile after enabling the capability. Confirmed the new profile is associated with the correct App ID and Distribution Certificate. Uploaded the new profile to EAS (Expo) and rebuilt the app. Yet the error persists during the Xcode archive step with Exit code 65. Additional Info: Provisioning Profile Name: HCF_AppStore_ProvisioningProfile App ID: com.rsmco.helpcreatefamilies Team: Reproductive Sciences Management Company, LLC Workflow: Expo EAS Build Capability causing issue: com.apple.developer.push-notifications

sending the following POST request: ---- HTTP REQUEST ---- POST https://appleid.apple.com/auth/token Headers: Content-Type: application/x-www-form-urlencoded Body: client_id=au.com.thejlrguy.businesschat&client_secret=eyJhbGciOiJFUzI1NiIsImtpZCI6IktLUDc4MkhGVTcifQ.eyJ...QeDn7ug&grant_type=client_credentials&scope=https%3A%2F%2Fappleid.apple.com Getting the below error: {"error":"invalid_client"} The private key used to sign the JWT was created 24 hours ago.

Problem Description Location-based notifications added with UNLocationNotificationTrigger and CLCircularRegion do not fire consistently when the user enters the monitored region. Sometimes they work, sometimes they do not. In tests where the user physically enters the region and waits several days, the notification often never triggers. What we’ve confirmed Notification permission is granted Location permission is set to “Always” The notification request is successfully added (no error from UNUserNotificationCenter.add) Pending notification requests are present when checked with getPendingNotificationRequests CLLocationManager didEnterRegion / didExitRegion work when we monitor the same region via startMonitoring(for:) UNLocationNotificationTrigger behavior is inconsistent and unreliable in our tests Reproduction Steps Launch the app and grant notification permission and “Always” location permission Add a region notification (either by current GPS location or by selecting a point from MKLocalSearch) Leave the monitored region Later, physically return into the region Expected: a notification is delivered when entering the region Actual: the notification often does not appear, even after waiting days Our Hypothesis: Coordinate System Mismatch in China We suspect the issue may be related to coordinate systems in mainland China. In China, Apple MapKit and MKLocalSearch use GCJ-02 (the “Mars” coordinate system required by local regulations). Device GPS and CLCircularRegion / Core Location use WGS-84. If an app supplies GCJ-02 coordinates to CLCircularRegion (e.g. from MapKit or search), the region center may be offset by hundreds of meters from the actual WGS-84 position. That could make the system’s “inside region” check fail, even when the user is physically inside the intended area. Questions for Apple Does CLCircularRegion (and therefore UNLocationNotificationTrigger) expect coordinates in WGS-84? If so, should apps in China convert GCJ-02 to WGS-84 before passing coordinates to CLCircularRegion? Is there any official guidance or documentation for handling coordinate systems when using location-based notifications in mainland China? Are there known limitations or special requirements for UNLocationNotificationTrigger in China (e.g. coordinate system, accuracy, or system behavior) that could explain intermittent or missing triggers?

Hello guys, i need a little help. Im building an alarm clock app, pretty good one, and i have my own sounds i want to use as the alarm ring but notifications on apple cant work when the phone is turned off or the device is in silent mode (Or at least thats how i understand it) unless they have this feature called critical alerts that lets you have notifications even when the phone is turned off or silented. Without this, the phone can do just one beep and only when you open the notification, then it starts ringing but how is this supposed to wake you up? Alarmy has this worked out fine and i cant figure out how, maybe someone here knows. Im thinking maybe they have the critical alerts enabled but then i dont know why Apple would approve theirs and not mine. I tried to submit for the critical alerts feature but apple didn’t approve it saying the app is not the use case and im kinda lost. The whole app could be ruined because of this. So my question is. is there any way how i can use my custom sounds as a notifications on ios even if the phone is turned off or in silent mode+turned off and the app is not straight up running without being approved for critical alerts? Somehow like alarmy does it but i dont know if they have the critical alerts or not. Thank you very much for any kind of help 🙏. For everyone whos reading this, take care!

Notification coordination between iOS and watchOS is not working properly watchOS and iOS try to coordinate between phone and watch notifications. The concept here is that if there is a main app and a companion app, they could both be sending a notification, then the notification would alert on both, which is a deviation from how notification mirroring is handled if there is an iOS app but no watch app. The watch waits for the iOS notification to fire so they can determine if this is the same notification that needs to be deduped, displayed on one device but not the other, or separate notifications to be displayed both. If there is no notification on the phone, the watch will timeout after 13 seconds and alert anyway. If you have an iOS companion app, the best solution to this is to send the same notification on both devices simultaneously, and ensuring the UNNotificationRequest.identifier matches on both notifications. This will let the systems determine how to handle the notification correctly and quickly, and the notification will alert right away. https://developer.apple.com/forums/thread/765669 According to the above article, "when a notification arrives on watchOS alone first, it coordinates with iOS," but in reality, it doesn't work properly. Detailed process of this phenomenon watchOS receives a notification. On watchOS, the notification is not immediately shown to the user. iOS receives a notification with the same UNNotificationRequest.identifier as in (1). The notification in (3) does not appear on either iOS or watchOS. However, the notification from (3) does appear in iOS Notification Center. Thirteen seconds after watchOS received the notification, the notification from (1) is shown to the user on watchOS. In the end, the iOS and watchOS notifications are not consolidated and each remains in its respective notification center. Up to (3) there are no issues. Starting with (4), both iOS and watchOS exhibit a lot of odd behavior. This phenomenon occurs with both local notifications and push notifications. When iOS receives the notification first, there is no problem. The notification for watch received later is processed appropriately, and the watchOS notification is not additionally displayed to the user. Expected proper process Same as above. Same as above. Same as above. The notification in (1) is integrated into the notification in (3). The notification in (3) is alerted to the user immediately. 2 sample projects to reproduce Only the main code is attached. Sample project1: local notifications Swift code for local notification app (iOS, watchOS) - App.swift.txt Sample project2: push notifications This sample project is implemented using Firebase Functions and Firebase Cloud Messaging. Swift code push notification app (iOS, watchOS) - App.swift.txt Server side JavaScript code for FirebaseFunction - index.js.txt Tested devices and OS This phenomenon occurred in both of the following patterns. Pattern 1 Xcode 26.0 iPhone 16 (iOS 26.0) Apple Watch series 10 (watchOS 26.0) Pattern 2 Xcode 16.4 iPhone 11 (iOS 18.6) Apple Watch SE 2nd gen (watchOS 11.6) Question Is this phenomenon a bug? Or is my understanding or implementation incorrect? Feedback Assistant number FB20339772

Hello, I recently had an unusual experience, and I’m wondering if this is related to Apple’s policies, so I wanted to ask. While a call is in Picture-in-Picture (PIP) mode, notification pushes from the same app do not appear. The API is being triggered, but the notification banner does not show on the device. Once PIP is closed, the notifications start appearing normally again. Is this behavior enforced by Apple’s policies? What’s interesting is that banners from other apps do appear — only the banners from the app currently in PIP are not shown.

Hi, We recently updated our app icon, but the push notification icon has not been updated on some devices. It still shows the old icon on: • iPhone 16 Pro — iOS 26 • iPhone 14 — iOS 26 • iPad Pro 11” (M4) — iOS 18.6.2 • iPhone 16 Plus — iOS 18.5 After restarting these devices, the push notification icon is refreshed and displays the new version correctly. Could you advise how we can ensure the push notification icon updates properly on all affected devices without requiring users to restart? Thank you.

Hi, We recently updated our app icon, but the push notification icon has not been updated on some devices. It still shows the old icon on: • iPhone 16 Pro — iOS 26 • iPhone 14 — iOS 26 • iPad Pro 11” (M4) — iOS 18.6.2 • iPhone 16 Plus — iOS 18.5 After restarting these devices, the push notification icon is refreshed and displays the new version correctly. Could you advise how we can ensure the push notification icon updates properly on all affected devices without requiring users to restart? Thank you.

Our mobile app uses a specific platform for subscription management. At this time,, it's integration with Apple notifications is built around the Server-to-Server Notifications v1 and the traditional verifyReceipt endpoint. At this time, it does not support Server-to-Server Notifications v2, nor has any published documentation or resources on a custom integration path using v2. Our app is built using Flutter and we handle purchases with the in_app_purchase plugin. However, due to the limitation on the system for subscription side, we need to connect to Apple’s legacy server-to-server subscription endpoints (StoreKit v1) to receive real-time notifications and validate receipts. Could you please provide information how to do it?

We are in the process of preparing our app to support the new Texas law (SB2420) that takes effect 1/1/2026. After reviewing Apple's recent announcements​/docs concerning this subject, one thing isn't clear to me: how to associate an app install with a​n App Store Server RESCIND_CONSENT notification​ that could be delivered to our server. Our app is totally free so there isn't an originalTransactionId​ or other similar transaction IDs that would be generated as part of an in-app purchase (and then subsequently sent as part of the payload in the notification to our server during an in-app purchase scenario). So my question is: How do I associate an app (free app) install with an App Store Server RESCIND_CONSENT notification​ that is sent to our server​?

I'm experiencing a critical regression on iOS 26 with a Notification Content Extension. extensionContext.open(uri) fails to open external URLs with LSApplicationWorkspaceErrorDomain Code=115 under specific conditions. Problem: When the main app is killed, and a rich push notification is received and expanded, tapping a button (specifically one with a transparent background, cornerRadius=0, clipsToBounds=false) fails to open its associated URL. Key Details: iOS 26 Only: Works perfectly on iOS 17, 18, etc. App Killed State Only: Works if the app is running (foreground/background). Works on Subsequent Notifications: The link will open if a second notification is received. LSApplicationQueriesSchemes: Confirmed to be correctly configured in the main app's Info.plist and present in the app bundle. Delay No Help: Adding a 1s delay before open(uri) does not fix it. My os_log statements confirm the button tap

Hi all, I’m running into an issue with provisioning profiles not including the com.apple.developer.push-notifications entitlement — even though everything seems to be configured correctly. Here's what I’ve done: Checked the App ID has Push Notifications enabled. I’ve clicked “Configure” and created a Production APNs certificate under the App ID. I’ve regenerated the provisioning profiles (Ad Hoc and App Store). I can see within the profiles within App Store Connect that the push notifications capability is listed I’ve downloaded and decoded the profiles using: security cms -D -i profile.mobileprovision > decoded.plist But com.apple.developer.push-notifications is still missing under the <key>Entitlements</key> block. This is causing issues because: When I submit the build to eas I receive this error from XCode: - Provisioning profile "*** Adhoc" doesn't include the com.apple.developer.push-notifications entitlement. Profile qualification is using entitlement definitions that may be out of date. Connect to network to update. (in target '***' from project '***') Refer to "Xcode Logs" below for additional, more detailed logs. To isolate the issue further I: Created a completely new App ID, enabling Push Notifications from the start. Created new APNs certificate. Generated new provisioning profiles with a valid distribution certificate. Still no push entitlement embedded in the profile. Question: Has anyone else encountered this issue where Push Notifications are enabled and configured, but the entitlement still fails to embed in the profile? Thanks in advance.

Im creating a basic app, needs push notification capability. I have created two profiles (development & distribution), selected my app in Identifiers and checked the PN box to enable it (no need for broadcast). I add the profile to Xcode and it says "Provisioning profile "New VP App Jan 2026" doesn't include the Push Notifications capability." What am I missing?

In the main app, is there a way to distinguish whether the application:didFinishLaunchingWithOptions: method is triggered by the user manually clicking the app icon, or whether it is automatically triggered by the system after Live Activities receives a remote message notification?

I need to create a background notification that counts down time and uses buttons to add or subtract time. Currently, I'm developing in React Native and using Expo Go to develop my app. I managed to display a simple notification, but I can't get it to work in real-time, so that when the time is up, it emits a sound indicating that the break is over. How can I implement this feature? My application now: My goal:

After updating to iOS 26 beta 1, I can't receive any push notifications from most applications. I can receive notifications from like Calendar, which uses local & reserved notifications, but I can't receive any remote-based notifications.