My application needs local network access. When it is started for the first time, the user gets a prompt to enable local network access (as expected). The application is then shown as enabled in Privacy & Security / Local Network and local network access is working. If macOS is then shutdown and restarted, local network access is blocked for the application even though it is still shown as enabled in Privacy & Security / Local Network. Local network access can be restored either by toggling permission off and on in Privacy & Security / Local Network or by disabling and enabling Wi-Fi. This behaviour is consistent on Sequoia 15.1. It happens sometimes on 15.0 and 15.0.1 but not every time. Is my application doing something wrong or is this a Sequoia issue? If it is a Sequoia issue, is there some change I can make to my application to work around it?

We have a VPN app that uses NEPacketTunnelProvider with includeAllNetworks = true. We've encountered an issue where push notifications are not delivered over Wi-Fi while the tunnel is active in a pre-MFA quarantine state (tunnel is up but traffic is blocked on server side), regardless of whether excludeAPNS is set to true or false. Observed behavior Wi-Fi excludeAPNS = true - Notifications not delivered Wi-Fi excludeAPNS = false - Notifications not delivered Cellular excludeAPNS = true - Notifications delivered Cellular excludeAPNS = false - Notifications not delivered On cellular, the behavior matches our expectations: setting excludeAPNS = true allows APNS traffic to bypass the tunnel and notifications arrive; setting it to false routes APNS through the tunnel and notifications are blocked (as expected for a non-forwarding tunnel). On Wi-Fi, notifications fail to deliver in both cases. Our question Is this expected behavior when includeAllNetworks is enabled on Wi-Fi, or is this a known issue / bug with APNS delivery? Is there something else in the Wi-Fi networking path that includeAllNetworks affects beyond routing, which could prevent APNS from functioning even when the traffic is excluded from the tunnel? Sample Project Below is the minimal code that reproduces this issue. The project has two targets: a main app and a Network Extension. The tunnel provider captures all IPv4 and IPv6 traffic via default routes but does not forward packets — simulating a pre-MFA quarantine state. The main app configures the tunnel with includeAllNetworks = true and provides a UI toggle for excludeAPNS. PacketTunnelProvider.swift (Network Extension target): import NetworkExtension class PacketTunnelProvider: NEPacketTunnelProvider { override func startTunnel(options: [String : NSObject]?, completionHandler: @escaping (Error?) -> Void) { let settings = NEPacketTunnelNetworkSettings(tunnelRemoteAddress: "127.0.0.1") let ipv4 = NEIPv4Settings(addresses: ["198.51.100.1"], subnetMasks: ["255.255.255.0"]) ipv4.includedRoutes = [NEIPv4Route.default()] settings.ipv4Settings = ipv4 let ipv6 = NEIPv6Settings(addresses: ["fd00::1"], networkPrefixLengths: [64]) ipv6.includedRoutes = [NEIPv6Route.default()] settings.ipv6Settings = ipv6 let dns = NEDNSSettings(servers: ["198.51.100.1"]) settings.dnsSettings = dns settings.mtu = 1400 setTunnelNetworkSettings(settings) { error in if let error = error { completionHandler(error) return } self.readPackets() completionHandler(nil) } } private func readPackets() { packetFlow.readPackets { [weak self] packets, protocols in self?.readPackets() } } override func stopTunnel(with reason: NEProviderStopReason, completionHandler: @escaping () -> Void) { completionHandler() } override func handleAppMessage(_ messageData: Data, completionHandler: ((Data?) -> Void)?) { if let handler = completionHandler { handler(messageData) } } override func sleep(completionHandler: @escaping () -> Void) { completionHandler() } override func wake() { } } ContentView.swift (Main app target) — trimmed to essentials: import SwiftUI import NetworkExtension struct ContentView: View { @State private var excludeAPNs = false @State private var manager: NETunnelProviderManager? var body: some View { VStack { Toggle("Exclude APNs", isOn: $excludeAPNs) .onChange(of: excludeAPNs) { Task { await saveAndReload() } } Button("Connect") { Task { await toggleVPN() } } } .padding() .task { await loadManager() } } private func loadManager() async { let managers = try? await NETunnelProviderManager.loadAllFromPreferences() if let existing = managers?.first { manager = existing } else { let m = NETunnelProviderManager() let proto = NETunnelProviderProtocol() proto.providerBundleIdentifier = "<your-extension-bundle-id>" proto.serverAddress = "127.0.0.1" proto.includeAllNetworks = true proto.excludeAPNs = excludeAPNs m.protocolConfiguration = proto m.localizedDescription = "TestVPN" m.isEnabled = true try? await m.saveToPreferences() try? await m.loadFromPreferences() manager = m } if let proto = manager?.protocolConfiguration as? NETunnelProviderProtocol { excludeAPNs = proto.excludeAPNs } } private func saveAndReload() async { guard let manager else { return } if let proto = manager.protocolConfiguration as? NETunnelProviderProtocol { proto.includeAllNetworks = true proto.excludeAPNs = excludeAPNs } manager.isEnabled = true try? await manager.saveToPreferences() try? await manager.loadFromPreferences() } private func toggleVPN() async { guard let manager else { return } if manager.connection.status == .connected { manager.connection.stopVPNTunnel() } else { await saveAndReload() try? manager.connection.startVPNTunnel() } } } Steps to reproduce Build and run the sample project with above code on a physical iOS device. Connect to a Wi-Fi network. Set excludeAPNS = true using the toggle and tap Connect. Send a push notification to the device to a test app with remote notification capability (e.g., via a test push service or the push notification console). Observe that the notification is not delivered. Disconnect. Switch to cellular. Reconnect with the same settings. Send the same push notification — observe that it is delivered. Environment iOS 26.2 Xcode 26.2 Physical device (iPhone 15 Pro)

I have a custom VPN app that uses NETunnelProviderManager to install a VPN Profile if one is not already installed. On previous iOS versions this would open the VPN Settings and ask for either the PIN, FaceID or TouchID and install the profile. With iOS 26 beta5 it opens the VPN Settings and stops. Is this a bug in iOS 26? Have there been changes to NETunnelProviderManager for iOS 26 that I'm not aware of? FYI we do the samething on macOS 26 beta5 and that works as expected.

My company has a server that supports ticket-based TLS session resumption (per RFC 5077). We have done Wireshark captures that show that our iOS client app, which uses URLSession for REST and WebSocket connections to the server, is not sending the TLS "session_ticket" extension in the Client Hello package that necessary to enable ticket-based resumption with the server. Is it expected that URLSession does not support ticket-based TLS session resumption? If "yes", is there any way to tell URLSession to enable ticket-based session resumption? the lower-level API set_protocol_options_set_tls_tickets_enabled() hints that the overall TLS / HTTP stack on IOS does support ticket-based resumption, but I can't see how to use that low-level API with URLSession. I can provide (lots) more technical details if necessary, but hopefully this is enough context to determine whether ticket-based TLS resumption is supported with URLSession. Any tips / clarifications would be greatly appreciated.

Greetings, I would like to understand this URLCache behavior for two different requests to the same end point but with a different header value. Here is a code with comment explaining the behavior. // Create a request to for a url. let url = URL(string: "https://&lt;my url&gt;?f=json")! var request = URLRequest(url: url) // Set custom header with a value. request.setValue("myvalue", forHTTPHeaderField: "CustomField") // Send request to get the response. let (data, response) = try await URLSession.shared.data(for: request) print("data: \(String(describing: String(data: data, encoding: .utf8)))") print("response: \(response)") // Create second request to the same url but with different value of custom header field. var request2 = URLRequest(url: url) request2.setValue("newvalue", forHTTPHeaderField: "CustomField") // Check the URL cache for second request and it returns the response // of the first request even though the second request has different header value. let cachedResponse = URLCache.shared.cachedResponse(for: request2) print("cachedResponse: \(cachedResponse?.response)") Is this a bug in URLCache that request headers are not matched while returning the response? Is this an expected behavior? If yes, why?

Hi, Our project is a MacOS SwiftUI GUI application that bundles a (Sandboxed) System Network Extension, signed with a Developer ID certificate for distribution outside of the app store. The system network extension is used to write a packet tunnel provider (NEPacketTunnelProvider), as our project requires the creation of a TUN device. In order for our System VPN to function, it must reach out to a (self-hosted) server (i.e. to discover a list of peers). Being self-hosted, this server is typically not accessible via the public web, and may only be accessible from within a VPN (such as those also implemented using NEPacketTunnelProvider, e.g. Tailscale, Cloudflare WARP). What we've discovered is that the networking code of the System Network Extension process does not attempt to use the other VPN network interfaces (utunX) on the system. In practice, this means requests to IPs and hostnames that should be routed to those interfaces time out. Identical requests made outside of the Network System Extension process use those interfaces and succeed. The simplest example is where we create a URLSession.downloadTask for a resource on the server. A more complicated example is where we execute a Go .dylib that continues to communicate with that server. Both types of requests time out. Two noteworthy logs appear when packets fail to send, both from the kernel 'process': cfil_hash_entry_log:6088 <CFIL: Error: sosend_reinject() failed>: [30685 com.coder.Coder-Desktop.VPN] <UDP(17) out so b795d11aca7c26bf 57728068503033955 57728068503033955 age 0> lport 3001 fport 3001 laddr 100.108.7.40 faddr 100.112.177.88 hash 58B15863 cfil_service_inject_queue:4472 CFIL: sosend() failed 49 I also wrote some test code that probes using a UDP NWConnection and NWPath availableInterfaces. When run from the GUI App, multiple interfaces are returned, including the one that routes the address, utun5. When ran from within the sysex, only en0 is returned. I understand routing a VPN through another is unconventional, but we unfortunately do need this functionality one way or another. Is there any way to modify which interfaces are exposed to the sysex? Additionally, are these limitations of networking within a Network System Extension documented anywhere? Do you have any ideas why this specific limitation might exist?

Hi, I’m implementing a macOS DNS Proxy as a system extension and running into a persistent activation error: OSSystemExtensionErrorDomain error 9 (validationFailed) with the message: extension category returned error This happens both on an MDM‑managed Mac and on a completely clean Mac (no MDM, fresh install). Setup macOS: 15.x (clean machine, no MDM) Xcode: 16.x Team ID: AAAAAAA111 (test) Host app bundle ID: com.example.agent.NetShieldProxy DNS Proxy system extension bundle ID: com.example.agent.NetShieldProxy.dnsProxy The DNS Proxy is implemented as a NetworkExtension system extension, not an app extension. Host app entitlements From codesign -d --entitlements :- /Applications/NetShieldProxy.app: xml com.apple.application-identifier AAAAAAA111.com.example.agent.NetShieldProxy <key>com.apple.developer.system-extension.install</key> <true/> <key>com.apple.developer.team-identifier</key> <string>AAAAAAA111</string> <key>com.apple.security.app-sandbox</key> <true/> <key>com.apple.security.application-groups</key> <array> <string>group.com.example.NetShieldmac</string> </array> <key>com.apple.security.files.user-selected.read-only</key> <true/> xml com.apple.application-identifier AAAAAAA111.com.example.agent.NetShieldProxy.dnsProxy <key>com.apple.developer.networking.networkextension</key> <array> <string>dns-proxy-systemextension</string> </array> <key>com.apple.developer.team-identifier</key> <string>AAAAAAA111</string> <key>com.apple.security.application-groups</key> <array> <string>group.com.example.NetShieldmac</string> <string>group.example.NetShieldmac</string> <string>group.example.agent.enterprise.macos</string> <string>group.example.com.NetShieldmac</string> </array> DNS Proxy system extension Info.plist On the clean Mac, from: bash plutil -p "/Applications/NetShieldProxy.app/Contents/Library/SystemExtensions/com.example.agent.NetShieldProxy.dnsProxy.systemextension/Contents/Info.plist" I get: json { "CFBundleExecutable" => "com.example.agent.NetShieldProxy.dnsProxy", "CFBundleIdentifier" => "com.example.agent.NetShieldProxy.dnsProxy", "CFBundleName" => "com.example.agent.NetShieldProxy.dnsProxy", "CFBundlePackageType" => "SYSX", "CFBundleShortVersionString" => "1.0.1.8", "CFBundleSupportedPlatforms" => [ "MacOSX" ], "CFBundleVersion" => "0.1.1", "LSMinimumSystemVersion" => "13.5", "NSExtension" => { "NSExtensionPointIdentifier" => "com.apple.dns-proxy", "NSExtensionPrincipalClass" => "com_example_agent_NetShieldProxy_dnsProxy.DNSProxyProvider" }, "NSSystemExtensionUsageDescription" => "SYSTEM_EXTENSION_USAGE_DESCRIPTION" } The DNSProxyProvider class inherits from NEDNSProxyProvider and is built in the system extension target. Activation code In the host app, I use: swift import SystemExtensions final class SystemExtensionActivator: NSObject, OSSystemExtensionRequestDelegate { private let extensionIdentifier = "com.example.agent.NetShieldProxy.dnsProxy" func activate(completion: @escaping (Bool) -> Void) { let request = OSSystemExtensionRequest.activationRequest( forExtensionWithIdentifier: extensionIdentifier, queue: .main ) request.delegate = self OSSystemExtensionManager.shared.submitRequest(request) } func request(_ request: OSSystemExtensionRequest, didFailWithError error: Error) { let nsError = error as NSError print("Activation failed:", nsError) } func request(_ request: OSSystemExtensionRequest, didFinishWithResult result: OSSystemExtensionRequest.Result) { print("Result:", result.rawValue) } } Runtime behavior on a clean Mac (no MDM) config.plist is created under /Library/Application Support/NetShield (via a root shell script). A daemon runs, contacts our backend, and writes /Library/Application Support/NetShield/state.plist with a valid dnsToken and other fields. The app NetShieldProxy.app is installed via a notarized, stapled Developer ID .pkg. The extension bundle is present at: /Applications/NetShieldProxy.app/Contents/Library/SystemExtensions/com.example.agent.NetShieldProxy.dnsProxy.systemextension. When I press Activate DNS Proxy in the UI, I see in the unified log: text NetShieldProxy: [com.example.agent:SystemExtensionActivator] Requesting activation for system extension: com.example.agent.NetShieldProxy.dnsProxy NetShieldProxy: [com.example.agent:SystemExtensionActivator] SystemExtensionActivator - activation failed: extension category returned error (domain=OSSystemExtensionErrorDomain code=9) NetShieldProxy: [com.example.agent:SystemExtensionActivator] SystemExtensionActivator - OSSystemExtensionError code enum: 9 NetShieldProxy: [com.example.agent:SystemExtensionActivator] SystemExtensionActivator - validationFailed And: bash systemextensionsctl list -> 0 extension(s) There is no prompt in Privacy & Security on this clean Mac. Question Given: The extension is packaged as a system extension (CFBundlePackageType = SYSX) with NSExtensionPointIdentifier = "com.apple.dns-proxy". Host and extension share the same Team ID and Developer ID Application cert. Entitlements on the target machine match the provisioning profile and Apple’s docs for DNS Proxy system extensions (dns-proxy-systemextension). This is happening on a clean Mac with no MDM profiles at all. What are the likely reasons for OSSystemExtensionErrorDomain error 9 (validationFailed) with "extension category returned error" in this DNS Proxy system extension scenario? Is there any additional configuration required for DNS Proxy system extensions (beyond entitlements and Info.plist) that could trigger this category-level validation failure? Any guidance or examples of a working DNS Proxy system extension configuration (host entitlements + extension Info.plist + entitlements) would be greatly appreciated. Thanks!

Howdy, I've been developing a packet tunnel extension meant to run on iOS and MacOS. For development I'm using xcodegen + xcodebuild to assemble a bunch of swift and rust code together. I'm moving from direct TUN device management on Mac to shipping a Network Extension (appex). With that move I noticed that on some mac laptops NE fails to start completely, whilst on others everything works fine. I'm using CODE_SIGN_STYLE: Automatic, Apple IDs are within the same team, all devices are registered as dev devices. Signing dev certificates, managed by xcode. Some suspicious logs: (NetworkExtension) [com.apple.networkextension:] Signature check failed: code failed to satisfy specified code requirement(s) ... (NetworkExtension) [com.apple.networkextension:] Provider is not signed with a Developer ID certificate What could be the issue? Where those inconsistencies across devices might come from?

I have written the Transparent App Proxy and can capture the network flow and send it to my local server. I want to avoid any processing on the traffic outgoing from my server and establish a connection with a remote server, but instead of connecting to the remote server, it again gets captured and sent back to my local server. I am not getting any clue on how to ignore these flows originating from my server. Any pointers, API, or mechanisms that will help me?

Greetings.I have an app today that uses multipeer connectivity extensively. Currently, when the user switches away from the app, MPC disconnects the session(s) - this is by design apparently (per other feedback). I'd like to hear if anyone has experimented with iOS9 multitasking / multipeer and whether MPC sessions can stay alive?Thanks

Hello eveybody,Currently I'm working on an app which connects to a device. During testing I encounter an internal error of NEHotspotConfigurationErrorDomain. See the log snippet:Domain=NEHotspotConfigurationErrorDomain Code=8 "internal error." UserInfo={NSLocalizedDescription=internal error.}This error appears randomly. In one day I encountered it three times. The only solution I can think of is catching this error somehow and then telling the user to restart the device.After this error appears, the wifi functionality of iOS in all third party apps seems to be broken. Only restarting helps as far as I know. Also there seems to be nothing we as app developers can do about it. Therefor I wonder if there is some way to prevent this error somehow? The only solution I can think of is catching this error somehow and then telling the user to restart the device.Also since there is not much information about this error on the web, it would be really nice if someone can clarify whats going on with this error.Regards.

Hi all, I have a working macOS (Intel) system extension app that currently uses only a Content Filter (NEFilterDataProvider). I need to capture/log HTTP and HTTPS traffic in plain text, and I understand NETransparentProxyProvider is the right extension type for that. For HTTPS I will need TLS inspection / a MITM proxy — I’m new to that and unsure how complex it will be. For DNS data (in plain text), can I use the same extension, or do I need a separate extension type such as NEPacketTunnelProvider, NEFilterPacketProvider, or NEDNSProxyProvider? Current architecture: Two Xcode targets: MainApp and a SystemExtension target. The SystemExtension target contains multiple network extension types. MainApp ↔ SystemExtension communicate via a bidirectional NSXPC connection. I can already enable two extensions (Content Filter and TransparentProxy). With the NETransparentProxy, I still need to implement HTTPS capture. Questions I’d appreciate help with: Can NETransparentProxy capture the DNS fields I need (dns_hostname, dns_query_type, dns_response_code, dns_answer_number, etc.), or do I need an additional extension type to capture DNS in plain text? If a separate extension is required, is it possible or problematic to include that extension type (Packet Tunnel / DNS Proxy / etc.) in the same SystemExtension Xcode target as the TransparentProxy? Any recommended resources or guidance on TLS inspection / MITM proxy setup for capturing HTTPS logs? There are multiple DNS transport types — am I correct that capturing DNS over UDP (port 53) is not necessarily sufficient? Which DNS types should I plan to handle? I’ve read that TransparentProxy and other extension types (e.g., Packet Tunnel) cannot coexist in the same Xcode target. Is that true? Best approach for delivering logs from multiple extensions to the main app (is it feasible)? Or what’s the best way to capture logs so an external/independent process (or C/C++ daemon) can consume them? Required data to capture (not limited to): All HTTP/HTTPS (request, body, URL, response, etc.) DNS fields: dns_hostname, dns_query_type, dns_response_code, dns_answer_number, and other DNS data — all in plain text. I’ve read various resources but remain unclear which extension(s) to use and whether multiple extension types can be combined in one Xcode target. Please ask if you need more details. Thank you.

Hello all, WWDC 2025 introduced Wi‑Fi Aware (NAN) support on iOS 26 for peer-to-peer discovery and direct connections, but I noticed macOS Tahoe doesn’t include it. I couldn’t find any references to Wi‑Fi Aware APIs or framework support in the macOS SDK. Is Apple planning to bring Wi‑Fi Aware to macOS? If so, will this come in a future update to macOS 26 (e.g., 26.x), or is it deferred to macOS 27 or beyond? Thanks for any insights!

When i try to set the value ‘false’ for ‘usesClassicLoadingMode’ it is getting crashed. The crash logs has been shared below Ex: let config = URLSessionConfiguration.default if #available(iOS 18.4, *) { config.usesClassicLoadingMode = false } Error log : *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[__NSCFBoolean objectForKeyedSubscript:]: unrecognized selector sent to instance 0x1f655c390' *** First throw call stack: (0x188ae52ec 0x185f69a7c 0x188b4f67c 0x1889fcb84 0x1889fc4f0 0x191393bc8 0x1889ec8a0 0x1889ec6e4 0x191393ad0 0x191344dac 0x191344b58 0x107cfa064 0x107ce36d0 0x191343fcc 0x1891b3b18 0x1892dae58 0x189235c60 0x18921e270 0x18921d77c 0x18921a8ac 0x107ce0584 0x107cfa064 0x107ce891c 0x107ce95d8 0x107ceabcc 0x107cf5894 0x107cf4eb0 0x212f51660 0x212f4e9f8) terminating due to uncaught exception of type NSException Can you please provider the resolution steps

I want to know the right way/API/usage to use NWConnectionGroup to send both datagram and non-datagram stream. I am currently working on an P2P video streaming app. I want to leverage NWConnectionGroup over QUIC to handle both message channel (traditionally handled by a TCP connection) and media channel (traditionally handled by sth. over UDP) to transmit SRT packets back and forth. I created a NWConnectionGroup and it worked fine on non-datagram parts. The problems are with datagram part. I tried extracting a connection with datagram = true either from the group or from message, doesn't and in some cases it breaks other non-datagram connections. I currently send datagram directly using the NWConnectionGroup.send(content:completion). It kinda works but I keep seeing it canceled a lot of messages, which breaks SRT shortly after start. The warnings belong flooded my console. (Seems like want me to create a connection to transmit datagram, how?) nw_connection_create_with_connection [C1600] Original connection not yet connected nw_connection_group_create_connection_for_endpoint_and_parameters [G1] failed to create connection with parameters quic, local: fe80::439:68b4:6ec2:694%en0.60517, definite, attribution: developer, server I must use it in wrong way. What should I do to fix it?

I'm using a Mac Studio in a homelab context and use Homebrew to manage the installed services. The services include things that access the local network, for example Prometheus which monitors some other servers, a reverse proxy which fronts other web services on the network, and a DNS server which can use another as upstream. Local Network Access permissions make it impossible to reliably perform unattended updates of services because an updated binary requires a GUI login to grant local network permissions (again). I use brew services to manage the services as launchd agents, i.e. they run in a non-root GUI context. I know that I can also use sudo brew services which instead installs the services as launchd daemons, but running services as root has negative security implication and generally doesn't look like a good idea to me. If only there was a way to disable local network access checks altogether…

Hello, We are implementing a Transparent Proxy using NETransparentProxyProvider and configuring NETransparentProxyNetworkSettings with NENetworkRule. Currently, NENetworkRule requires: NENetworkRule( destinationHost: NWHostEndpoint(hostname: String, port: String), protocol: .TCP / .UDP / .any ) NWHostEndpoint.port accepts only a single port value (as a String) or an empty string for all ports. At present, we are creating a separate NENetworkRule for each port in the range (ex for range 49152–65535 approximately 16,384 rules). After deploying this configuration, we observe the following behavior: nesessionmanager starts consuming very high CPU (near 100%) The system becomes unresponsive The device eventually hangs and restarts automatically The behavior resembles a kernel panic scenario This strongly suggests that creating thousands of NENetworkRule entries may not be a supported or scalable approach. Questions: Is there any officially supported way to specify a port range in NENetworkRule? Is creating thousands of rules (one per port) considered acceptable or supported? Is the recommended design to intercept broadly (e.g., port = "") and filter port ranges inside handleNewTCPFlow / handleNewUDPFlow instead? Are there documented system limits for the number of NENetworkRule entries allowed in NETransparentProxyNetworkSettings?

Description: We are investigating an issue where running a specific e-commerce iOS app inside the Xcode Simulator intermittently disrupts the Mac’s network connectivity. When the app is launched in the Simulator, our NETransparentProxyProvider and NEFilterDataProvider extensions occasionally stop receiving traffic correctly, and shortly afterward the entire macOS DNS resolution fails. Once this happens, all apps on the Mac lose internet access until mac is restarted. Disabling extensions also fixing the issue. This issue only appears when the app runs in the Xcode Simulator. I would like to confirm: Is it possible for traffic patterns or network behavior inside the Simulator to interfere with system-level Network Extension providers on macOS? Are there known limitations or conflicts between the Simulator’s virtual networking interfaces and Network Extensions? Any recommended debugging steps or best practices to isolate this behavior? Any guidance, known issues, or suggestions would be appreciated.

I've recently updated one of our CI mac mini's to Sequoia in preparation for the transition to Tahoe later this year. Most things seemed to work just fine, however I see this dialog whenever the UI Tests try to run. This application BoostBrowerUITest-Runner is auto-generated by Xcode to launch your application and then run your UI Tests. We do not have any control over it, which is why this is most surprising. I've checked the codesigning identity with codesign -d -vvvv as well as looked at it's Info.plist and indeed the usage descriptions for everything are present (again, this is autogenerated, so I'm not surprised, but just wanted to confirm the string from the dialog was coming from this app) &lt;?xml version="1.0" encoding="UTF-8"?&gt; &lt;!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"&gt; &lt;plist version="1.0"&gt; &lt;dict&gt; &lt;key&gt;BuildMachineOSBuild&lt;/key&gt; &lt;string&gt;22A380021&lt;/string&gt; &lt;key&gt;CFBundleAllowMixedLocalizations&lt;/key&gt; &lt;true/&gt; &lt;key&gt;CFBundleDevelopmentRegion&lt;/key&gt; &lt;string&gt;en&lt;/string&gt; &lt;key&gt;CFBundleExecutable&lt;/key&gt; &lt;string&gt;BoostBrowserUITests-Runner&lt;/string&gt; &lt;key&gt;CFBundleIdentifier&lt;/key&gt; &lt;string&gt;company.thebrowser.Browser2UITests.xctrunner&lt;/string&gt; &lt;key&gt;CFBundleInfoDictionaryVersion&lt;/key&gt; &lt;string&gt;6.0&lt;/string&gt; &lt;key&gt;CFBundleName&lt;/key&gt; &lt;string&gt;BoostBrowserUITests-Runner&lt;/string&gt; &lt;key&gt;CFBundlePackageType&lt;/key&gt; &lt;string&gt;APPL&lt;/string&gt; &lt;key&gt;CFBundleShortVersionString&lt;/key&gt; &lt;string&gt;1.0&lt;/string&gt; &lt;key&gt;CFBundleSignature&lt;/key&gt; &lt;string&gt;????&lt;/string&gt; &lt;key&gt;CFBundleSupportedPlatforms&lt;/key&gt; &lt;array&gt; &lt;string&gt;MacOSX&lt;/string&gt; &lt;/array&gt; &lt;key&gt;CFBundleVersion&lt;/key&gt; &lt;string&gt;1&lt;/string&gt; &lt;key&gt;DTCompiler&lt;/key&gt; &lt;string&gt;com.apple.compilers.llvm.clang.1_0&lt;/string&gt; &lt;key&gt;DTPlatformBuild&lt;/key&gt; &lt;string&gt;24A324&lt;/string&gt; &lt;key&gt;DTPlatformName&lt;/key&gt; &lt;string&gt;macosx&lt;/string&gt; &lt;key&gt;DTPlatformVersion&lt;/key&gt; &lt;string&gt;15.0&lt;/string&gt; &lt;key&gt;DTSDKBuild&lt;/key&gt; &lt;string&gt;24A324&lt;/string&gt; &lt;key&gt;DTSDKName&lt;/key&gt; &lt;string&gt;macosx15.0.internal&lt;/string&gt; &lt;key&gt;DTXcode&lt;/key&gt; &lt;string&gt;1620&lt;/string&gt; &lt;key&gt;DTXcodeBuild&lt;/key&gt; &lt;string&gt;16C5031c&lt;/string&gt; &lt;key&gt;LSBackgroundOnly&lt;/key&gt; &lt;true/&gt; &lt;key&gt;LSMinimumSystemVersion&lt;/key&gt; &lt;string&gt;13.0&lt;/string&gt; &lt;key&gt;NSAppTransportSecurity&lt;/key&gt; &lt;dict&gt; &lt;key&gt;NSAllowsArbitraryLoads&lt;/key&gt; &lt;true/&gt; &lt;/dict&gt; &lt;key&gt;NSAppleEventsUsageDescription&lt;/key&gt; &lt;string&gt;Access is necessary for automated testing.&lt;/string&gt; &lt;key&gt;NSBluetoothAlwaysUsageDescription&lt;/key&gt; &lt;string&gt;Access is necessary for automated testing.&lt;/string&gt; &lt;key&gt;NSCalendarsUsageDescription&lt;/key&gt; &lt;string&gt;Access is necessary for automated testing.&lt;/string&gt; &lt;key&gt;NSCameraUsageDescription&lt;/key&gt; &lt;string&gt;Access is necessary for automated testing.&lt;/string&gt; &lt;key&gt;NSContactsUsageDescription&lt;/key&gt; &lt;string&gt;Access is necessary for automated testing.&lt;/string&gt; &lt;key&gt;NSDesktopFolderUsageDescription&lt;/key&gt; &lt;string&gt;Access is necessary for automated testing.&lt;/string&gt; &lt;key&gt;NSDocumentsFolderUsageDescription&lt;/key&gt; &lt;string&gt;Access is necessary for automated testing.&lt;/string&gt; &lt;key&gt;NSDownloadsFolderUsageDescription&lt;/key&gt; &lt;string&gt;Access is necessary for automated testing.&lt;/string&gt; &lt;key&gt;NSFileProviderDomainUsageDescription&lt;/key&gt; &lt;string&gt;Access is necessary for automated testing.&lt;/string&gt; &lt;key&gt;NSFileProviderPresenceUsageDescription&lt;/key&gt; &lt;string&gt;Access is necessary for automated testing.&lt;/string&gt; &lt;key&gt;NSLocalNetworkUsageDescription&lt;/key&gt; &lt;string&gt;Access is necessary for automated testing.&lt;/string&gt; &lt;key&gt;NSLocationUsageDescription&lt;/key&gt; &lt;string&gt;Access is necessary for automated testing.&lt;/string&gt; &lt;key&gt;NSMicrophoneUsageDescription&lt;/key&gt; &lt;string&gt;Access is necessary for automated testing.&lt;/string&gt; &lt;key&gt;NSMotionUsageDescription&lt;/key&gt; &lt;string&gt;Access is necessary for automated testing.&lt;/string&gt; &lt;key&gt;NSNetworkVolumesUsageDescription&lt;/key&gt; &lt;string&gt;Access is necessary for automated testing.&lt;/string&gt; &lt;key&gt;NSPhotoLibraryUsageDescription&lt;/key&gt; &lt;string&gt;Access is necessary for automated testing.&lt;/string&gt; &lt;key&gt;NSRemindersUsageDescription&lt;/key&gt; &lt;string&gt;Access is necessary for automated testing.&lt;/string&gt; &lt;key&gt;NSRemovableVolumesUsageDescription&lt;/key&gt; &lt;string&gt;Access is necessary for automated testing.&lt;/string&gt; &lt;key&gt;NSSpeechRecognitionUsageDescription&lt;/key&gt; &lt;string&gt;Access is necessary for automated testing.&lt;/string&gt; &lt;key&gt;NSSystemAdministrationUsageDescription&lt;/key&gt; &lt;string&gt;Access is necessary for automated testing.&lt;/string&gt; &lt;key&gt;NSSystemExtensionUsageDescription&lt;/key&gt; &lt;string&gt;Access is necessary for automated testing.&lt;/string&gt; &lt;key&gt;OSBundleUsageDescription&lt;/key&gt; &lt;string&gt;Access is necessary for automated testing.&lt;/string&gt; &lt;/dict&gt; &lt;/plist&gt; Additionally, spctl --assess --type execute BoostBrowserUITests-Runner.app return an exit code of 0 so I assume that means it can launch just fine, and applications are allowed to be run from "anywhere" in System Settings. I've found the XCUIProtectedResource.localNetwork value, but it seems to only be accessible on iOS for some reason (FB17829325). I'm trying to figure out why this is happening on this machine so I can either fix our code or fix the machine. I have an Apple script that will allow it, but it's fiddly and I'd prefer to fix this the correct way either with the machine or with fixing our testing code.

In our App, we have a network extension with a NEAppPushProvider subclass running. We run the following steps Setup a dual-band wireless router per the following: Broadcasting 2.4 GHz and 5 GHz channels Same SSID names for both channels Connected to the production network to the router DHCP assigning addresses in the 10.1.x.x network Connect the mobile device to the 5 GHz network (if needed, turn off the 2.4 GHz network temporarily; once the device connects to the 5 GHz network, the 2.4 GHz network can be turned back on). Create a NEAppPushManager in the App, using the SSID from the above mentioned network and set it to the matchSSIDs property. Call saveToPreferences() on the push manager to save. A. We have UI that shows the extension has been started and it has connected to the server successfully. Walk out of the range of the 5 GHz channel of the router, but stay within range of the 2.4ghz channel. Wait for the mobile device to connect to the 2.4 GHz channel. Expected: The extension would reconnect to the 2.4ghz network. Observed: The extension does not reconnect. Checking the logs for the extension we see that the following was called in the push provider subclass. stop(with:completionHandler:) > PID: 808 | 🗒️🛑 Stopped with reason 3: "noNetworkAvailable" The expectation is that start() on the NEAppPushProvider subclass would be called. Is this an incorrect expectation? How does the NEAppPushProvider handle same network SSID roaming among various band frequencies? I looked at the documentation and did not find any settings targeting 2.4 or 5 ghz networks. Please advise on what to do.